Day: May 19, 2017

Cloth Beam Matters

Karen

Does it matter what happens at the cloth beam? Why not let the woven fabric go around the beam as is and forget about it? You have worked diligently at every stage to ensure an even warp. Now, preparing the cloth beam for cloth will ensure the warp remains even.

Warping slats are placed on the cloth beam.
Warping slats cover the cords and knots on the cloth beam so the handwoven fabric has a flat surface to lay against.
Warping slat over the tie-on bar prevents the tie-on threads from putting bulges in the fabric. Bulges can distort the fabric and put uneven tension on warp ends.
Warping slats around the cloth beam for a smooth start.
When the warping slats have covered one full revolution of the cloth beam, no more slats are needed. The twill pre-measured tape on the floor gives a clue to the extended length of this table runner on the loom.

The cloth beam holds obstacles that threaten the evenness of your warp. Any raised surface on the beam, like beam cords and tie-on knots, will distort the warp tension as the woven fabric wraps around it. Warping slats solve the problem. I lay in the slats around the beam, one by one, as I advance the warp. This forms a flat surface around which my freshly-woven fabric can hug as the cloth beam turns.

M's and O's long table runner. Linen weft.
Long M’s and O’s table runner on the loom. The sample piece and towel that preceded the table runner have already reached the cloth beam.

Fear makes obstacles for our path that disturb our peace and threaten our well-being. Trust in the Lord. Trust pushes fear aside. The day you are afraid–the moment you are afraid–put your trust in God. Know that the Lord is for you. Your trust in Him forms a firm layer to build your life on. Like the warping slats that are in place for your handwoven cloth, your trust in God is a foundation on which to roll the fabric of your life.

May you walk without fear.

Peace,
Karen