Tag: chart

Charted Territory on the Drawloom

Karen

The chart that hangs at the left side of the beater gives a glimpse of the overall design of this rag rug. It’s the second page of a three-page chart. It’s not easy to make sense of the design on the loom, seeing only a small slice of the big picture. I am eager to see the whole project woven, to see how it aligns with the design I’ve imagined.

Drawloom rag rug on the loom.
First color block of the rug was brown. The second color block is red. Two different red fabrics alternate.
Following a chart for the single-unit drawloom.
Chart hangs at the left side of the loom. A transparent ruler is clipped to the chart. I move the ruler up, row by row, to keep my place on the chart. Single-unit draw cords that are pulled are held in place along the hook bar just above the beater.

I drew the design in MacStitch, a cross-stitch design program. Then, I imported the gridded image into Photo Affinity to add vertical shaded stripes to match the 10 white-/10 black-cord arrangement of single-unit draw cords on the loom. Lastly, I printed the enlarged chart to use as my guide at the loom.

Drawloom rag rug in the making.
Drawloom rag rug in the making.

How does our present slice of life fit into the overall plan? Only God knows. But one thing is certain. The Grand Weaver has a purpose for your life. It’s a purpose that he will fulfill. You and I are the work of his hands, work that he will not abandon. Yes, we make our plans. The truth is, our best plan is that which aligns with the design he has imagined.

May you get a glimpse of your life’s design.

On purpose,
Karen

Tools Day: Reeds

Karen

Eventually, I would like to have a metric reed (or two) in every possible size. Until then, I will be happy with what I have, while I gradually add to my supply, as needed, one reed at a time.

I prefer metric reeds (dents per 10 centimeters) over imperial reeds (dents per inch). For one thing, the math is easier for project planning. And because there are smaller increments between sizes, there are more sett choices with metric reeds. It could be my imagination, but it often seems that the metric reed yields a Goldilocks “just right” sett.

Assortment of weaving reeds.
Supply of reeds. Some purchased new, some second-hand purchases, and some received as gifts. All but one have been used on my looms. The reeds usually reside in my weaving supply closet.

My selection of reeds vary in length, from 70 cm (27″) to 120 cm (47″), to fit the weaving widths of my looms. But Glimåkra countermarch looms have beaters that are open on the sides, so I can use any length reed in any loom.

Beginning cotton warp with M's and O's.
Reed with 120 cm weaving width is being used on this 100 cm Glimåkra Ideal. This is a 22.5 dents/inch reed, sleyed two ends per dent. Notice that the warp is high in the reed? That’s because the front tie-on bar is going over the breast beam.

My all-around favorite reeds are those made by Glimåkra because they are lightweight and easy to handle, …and they come in metric sizes. (Of course, you need to choose reeds that work with your loom.)

Taqueté in Tencel on eight shafts.
This 120 cm reed is a perfect fit for the weaving width of the 120 cm Glimåkra Standard loom. This is a 50/10 metric reed, giving a Goldilocks “just right” sett for this 8/2 tencel taqueté.

I put together a reed conversion chart so that we can see our options at a glance. You never know when a new project will “require” a new metric reed!

Weaving reed metric/imperial conversion chart.

May your next project have a Goldilocks “just right” sett.

Happy weaving,
Karen