My New Glimåkra Julia Loom

My family of looms just welcomed a new little sister—Julia! This 8-shaft countermarch is Glimåkra’s smallest floor loom. I dressed the loom right away in 6/2 Tuna wool for 4-shaft Jämtlandsdräll to try out the loom. So far, so good. An 8-shaft project using 20/2 Mora wool is up next. Would you believe this is my new portable loom? Surprisingly, the Julia fits in the back of our vehicle, without disassembling. This is the loom you can expect to see with me at future workshops.

My new Glimakra Julia Loom delivered!
One of the boxes delivered to my front door.
Assembling my new Glimakra Julia loom!
Loom assembly in our foyer.

My Julia Observations:

  • It goes together like you’d expect from a Glimåkra. Instructions are minimal, and quality is high. It’s a well-designed puzzle.
  • The assembled loom is easy to move around to gain space needed for warping, or simply to change location for any reason.
  • The breast beam is not removable like it is on my other Glimåkra looms, which makes it a stretch to thread the heddles from the front. However, by hanging the shaft bars from the beater cradle at the very front I can thread the heddles without back strain. (Or, if you are petite and don’t mind climbing over the side, you can put the bench in the loom for threading.)
  • Tying up lamms and treadles is not much different than it is for my Ideal. Everything is well within reach from the front. It helps to take the lamms off the loom to put in the treadle cords, and then put the lamms back on the loom. With one extra person available, it is entirely feasible to elevate the loom on paint cans, upside-down buckets, or a small table to make tie-ups easier, but I didn’t find it necessary to do that.
Swedish loom corner in the living room. New Glimakra Julia.
Loom that Steve built sits near the windows in our living room. Julia sits nearby. Sister looms.
Glimåkra Standard and Glimåkra Julia in the living room.
Glimåkra Standard sits by the windows at the front of the living room. Julia sits a few steps away. Loom sisters.
  • Weaving on the Julia is a delight, as it is with my other countermarch looms. Everything works. With four shafts, the sheds are impeccable.
  • The bench adjusts to the right height.
  • The hanging beater is well balanced, sturdy, and has a good solid feel. I can move the beater back several times before needing to advance the warp.
  • I thought the narrower treadles might prove annoying, but I’ve been able to adjust quickly. After weaving a short while, I forget about the treadle size.
Jämtlandsdräll in Tuna wool.
Double-bobbin shuttle for the pattern weft, and new boat shuttle that came with the loom for the ground weave weft. All 6/2 Tuna wool. Jämtlandsdräll.

Steve is the loom assembler in our family. I stand by and give a hand when needed. I hope you can feel our excitement as you watch this short video of us discovering what’s in the boxes and figuring out how it all goes together.

May you enjoy the puzzles that come to your doorstep.

Happy Weaving,
Karen

26 thoughts on “My New Glimåkra Julia Loom

  1. Too cool.
    What a great video of putting together the 3d wooden puzzle. It reminds me of sewing a tailored jacket. All those pieces with no rhyme nor reason until it starts to come together.
    When I think about it… That is what weaving is.
    Thanks for sharing.

    1. Thank you for the glowing review! I was ready to purchase one, but was told it isn’t the wood like in the regular Glimakra loims, but plywood. Also told the front and back beams get grooves in them from the warp threads.
      Waiting for your updates in about 2 months.
      Thanks!

      1. Hi Nancy, If you haven’t heard enough about it in a couple months, send me a note and I’ll give an honest update.

        The wood is most definitely beautiful solid wood, not plywood at all. Any wooden breast beam and back beam will show wear from warp threads and beam cords. This loom is no different. I don’t think it’s a problem.

        Happy weaving,
        Karen

        1. Thank you very much! I will get back to you! Perhaps this dealer was trying to upsell me?
          Nancy

          1. Nancy, I look forward to hearing from you. I hope the dealer had better intentions than that. Anyway, if you keep doing your research you will end up with a good loom.

            Karen

          2. Hi Nancy,
            Decades ago I was enamored with English smocking and took two classes from two different instructors.on maintenance and care of the pleater. The first class I took we were told to NEVER EVER take the pleater completely apart as it was not possible to ever get it back together and working properly. The second class I took began with the instructor ‘accidentally’ dismantelling the pleater. We were taught how to care for a very simple tool.
            Maybe your dealer is not familiar with the loom?
            It sounds like you have a support system in this blog to help you through any challenges.
            Nannette

      1. Karen, is there some way you can email with me?
        My email is camel heights at msn dot com.
        Strange I know, it’s a street I lived on in Evergreen, Colorado. On the side of a mountain.
        I have more questions about this loom.
        Thank you very much!
        Nancy

  2. Loved the video – I could feel the excitement! I’m looking forward to seeing the beautiful items you will create with her 🙂

    1. Hi Kristin, Thanks for joining in the fun! It won’t be long and I’ll have her weaving an 8-shaft project.

      Happy weaving,
      Karen

  3. I can agree with you there. The Julia is a great little loom, I speak from the experience of a proud owner. I can therefore fully understand the joy of unpacking, because it was very similar to me last fall, only that it was my first loom… Greetings from Berlin, Julia

    1. Hi Julia, It’s good to hear from you. Oh, the excitement of putting together your first loom! That is the best of all. The Julia is a perfect first loom! Or second, or third, or fourth, or fifth… 🙂

      Very Happy Weaving,
      Karen

  4. What a darling little loom! I wish I had room for one more. I don’t always reply but always read you posts, Karen. Not only do I always learn something but I just enjoy feeling that we are keeping in touch.

    Please tell Steve I think he is the best husband a weaver could ever have!

    1. Hi Annie, It’s satisfying to know you read these posts. I do like keeping in touch, too.

      I’ll tell Steve. He’s definitely the best husband this weaver could ever have!
      Love,
      Karen

  5. Congratulations on your new loom Karen! How exciting!! And there os just nothing more beautiful than a new loom! May Julia bring you many happy hours of weaving. Sending love from WA. Gretchen

  6. i am green with envy, I would love to own a Julia, or even a Mighty Wolf from Schacht, as I am living in South Africa where looms are a big luxury at the moment with our exchange rate, and my studio space is taking over our home, it will stay a dream. I do have 5 Varpapu looms, 3 table looms, 2 floor looms.

    1. Hi Marlene, Thanks for chiming in!
      I’m glad that you have some good Varpapu looms to work with. The Julia is a sweet little loom in the family of Glimakra looms. The Glimakra Standard is still my favorite.

      Happy weaving,
      Karen

    1. Hi Marina, I’m glad you enjoyed the video! What you are seeing under the feet of my other looms are Stadig Loom Feet. They keep the loom from “walking,” and they help absorb the impact of the beater when firm beating is needed, such as for weaving rugs. I get them from GlimakraUSA.com.

      Thanks,
      Karen

Leave a Reply to Annie Cancel reply

Your email address will not be published.