Tools Day: Ski Shuttles

Patterned rag rugs always use at least two shuttles. I often have four or five filled ski shuttles at the loom. A low profile ski shuttle is an excellent choice for weaving patterned rag rugs. Why?

  1. It fits pleasantly in the hand.
  2. It holds a large amount of fabric weft without being bulky.
  3. The wide base glides smoothly across the warp.
  4. The low profile fits easily through the narrower shed of a tight warp that is common for rug weaving. (Beware of ski shuttles that are taller, and may not fit as easily through a tight shed.)
  5. It is slender enough to send it out of the shed to go over or under outer warp ends, when needed.
Basket of ski shuttles ready for the next rag rug!
Basket of ski shuttles that are ready for the next rosepath rag rug!

My ski shuttles are made by Glimåkra, except for the beautiful cherry wood ski shuttle my husband made for me.

Hand crafted cherry wood ski shuttle, and rosepath rag rug just off the loom.
Newly completed rosepath rag rug is ready to be hemmed. Cherry wood ski shuttle is hand crafted by Steve Isenhower.

 

Ski Shuttle Dimensions (Glimåkra Single Ski)
Height: 1 1/4″ (3 cm)
Width: 2″ (5 cm)
Length: 19 1/2″ (50 cm) and 25″ (64 cm)

Why I like low profile ski shuttles for weaving rag rugs.
Weaving width determines which ski shuttle length to use. The shorter shuttle works with any weaving width. The longer shuttle works only for wider weaving widths (30″ or more) and for spaces with plenty of clearance at the sides of the loom. The low profile of the shuttles is seen in relation to the height of the reed in the beater.

 

How to Wind a Ski Shuttle

1 — Hold ski shuttle vertically. Start with one tapered end of the fabric strip coming across the top of the ski shuttle. Hold the tapered end with your thumb while you start winding the fabric strip onto the shuttle with your other hand.

How to wind a ski shuttle.

 

2 — Continue wrapping the fabric strip around the length of the shuttle, straightening the fabric as you go.

How to wind a ski shuttle for rag rugs.

 

3 — Finish winding when you have a tail of fabric remaining.

How to wind a ski shuttle.

May your shuttles be a good fit for your hands.

Happy Weaving,
Karen

How to Begin a Rag Rug

It is not enough to be pretty; a good rag rug must also be sturdy. Four crucial steps give a rag rug the solid foundation it needs to get off to a great start, and to be ready for the strong beat required to make a rug that lasts.

How to Begin a Rag Rug

1 Space

  • leave enough warp to tie and finish ends after the rug is cut from the loom

Assuming there is a sample at the beginning of the warp, leave space after the sample. Leave about 4″ (10 cm) of empty warp. Then, using two warping slats, place one slat in each plain weave shed. The slats act as a spacer, and as a firm backstop for beating in the waste rags. (Leave about 8″ / 20 cm of space between each rug, from header to header.)

How to begin a rag rug. Four crucial steps.
Empty warp is followed by a pair of warping slats, scrap weft, warp yarn header, and beginning of hem. Measurements are marked on twill tape for reference while weaving.

2 Waste rags

  • a place to attach the temple
  • prevent the header from unraveling when the rug is cut from the loom

Weave with scrap fabric strips, 1 – 2″ (2.5 – 5 cm) wide, for 2″ (5 cm). Attach the temple as soon as possible.

3 Header

  • secures the rug weft
  • gives the rug a firm edge

Use warp yarn to weave a 3/8″ (1 cm) weft-faced header. Arrange the weft in small arcs across the width of the shed. Treadle the next shed and beat in the weft.

Weaving header for rag rug. How to.
With temple in place, the header is woven with 12/6 cotton, the warp yarn. Forming small waves in the weft places more weft in the shed, which helps prevent draw-in.

4 Hem

  • thinner rag weave, to be turned under and stitched

Cut fabric into narrow strips, 1/4″ (.5 cm) wide. Weave hem to desired length, with enough to fold under itself for finishing.

–Repeat the four steps in reverse order at the end of the rug.–

How to begin a good, sturdy rag rug!
Ready for the body of the rug! A good, strong beat will not disturb this layered foundation.

It takes courage to live by faith. Courage is the backbone against which life circumstances can push. Faith is knowing God has a higher purpose for the circumstances we find ourselves in. A rag rug with this firm starting point will not only look good, but be ready for a purpose. And so will we.

May you live courageously.

With faith,
Karen

Three on the Loom Bench

My son accepted my invitation to “try a little bit of weaving” while he was here for a recent visit. After a few instructions, Daniel was weaving the double binding rag rug like a pro. When his two little ones find him at the loom, they climb up to sit by him. They want to get a closer look. The children don’t understand what Daddy is doing, but they love being with him and watching him.

Double binding rag rug on the Glimakra Standard. Karen Isenhower
Three different cotton batik fabrics make up the body of the rug.
Learning to weave a rag rug. Glimakra Standard
Daniel tries his hand at weaving a double binding rag rug. He learns how to use two ski shuttles, turn the weft at the selvedge, step on four treadles in sequence, and move the temple. Whew, it’s a lot to remember!
Three on the loom bench. The children want to see what daddy is doing.
Up on the loom bench with their Daddy.

As children naturally love to be right next to their loving Daddy, so it is for us with our heavenly Father. Praise is the heart’s song. Praise to the Lord rises from the core of our being as we consider who he is and what he has done. There’s no better place to be than right by our Father’s side.

May your heart sing.

With wonder,
Karen

My Favorite Thing to Weave

Double binding on one and rosepath on the other. Both looms are weaving rag rugs. Detailed plans, multiple shuttles, fancy footwork. Piles of cotton fabric, and miles of cut fabric strips. I know what to expect when all these elements combine, but it still fascinates me to see the “roses” bloom on the rosepath and the two layers synchronize in the double binding!

Rosepath rag rug on the Glimakra Ideal loom. Karen Isenhower
Blue and pink “roses” emerge as the result of a planned treadling sequence.
Piles of fabric for making patterned rag rugs.
Piles of fabric on the cutting table. A picture of rag rugs being imagined.

Rosepath has demanding requirements–for threading, treadling, shuttle shuffling, and selvedges. Double binding on eight shafts has its own challenges–which shuttle goes first? But when I am at the loom weaving rag rugs I feel like singing. All of the efforts seem like bonuses to me. Everything comes together in a wonderful fashion. There, perched on my loom bench, I am doing what I love to do!

Double binding rag rug on the Glimakra Standard loom, with 8 shafts, 6 treadles.
Double binding rag rug has two layers woven at the same time. The bottom side of the weaving has reversed colors, with the blue batik fabric on the side borders, and the green and red batik fabric in the center panel.

Wisdom is closer than we think. It’s within reach. Hidden for us, not from us, our heavenly Father offers this gift and challenge called wisdom. The delight of rosepath only happens through the threading and treadling demands. Within the challenge of two-shuttle weaving lies the secret to double binding’s appeal. The thoughtful, truth-seeking approach to life may feel like work. But it’s those very efforts that bring us to the delight and surprise of wisdom’s jewels.

May you find roses blooming on your path.

Happy Weaving,
Karen