Category: just for fun

My Mistake that Made Rug Warp Snap

Karen

Draw-in can wreck your weaving. Avoid it at all costs. Did you know that draw-in can cause even 12/6 cotton rug warp to break? First, two ends on the right, and then, an inch later, two more in the middle. I had ten broken warp ends in all. Strong, sturdy, Swedish rug warp! I was weaving miniature rugs. Between the absence of a temple, and my failure to place in enough weft, the drawn-in warp ends could not stand the abrasion they got from the reed. What started out as a bright idea ended up a “learning experience.”

Miniature rag rugs, side by side.
Double binding warp is divided into four sections to weave individual mini rag rugs.
Four mini rag rugs on the loom. Draw in was a problem.
Draw-in happened gradually, and didn’t seem to pose a problem until near the end. Then warp ends started snapping.
Finishing miniature rag rugs.
Mini rag rugs off the loom. After making all repairs and finishing the ends, they will be hemmed and ready for use as mug rugs and hot pads.

Words reveal a person’s core. When abrasive thoughts continue time and again, words eventually break loose from the tongue. The warp end breaks, and the stability of the rug is compromised. It may seem like the warp end is the problem, but the problem is the abrasion that led up to the breakage. Fortunately, broken warp ends can be fixed, with time and effort. But learning to eliminate the abrasion in the first place is the tactic I want to employ.

May you strengthen your core.

Your friend,
Karen

Quiet Friday: Weave a Bag with Handles

Karen

Voila! A rag-weave bag with the handles woven in. First, the handle straps were woven on my band loom. And then, I wove the straps into the rag-weave bag on my floor loom. Lastly, I cut the weaving from the loom and sewed the bag together. This is a warp for double binding rag rugs. I take advantage of this double cloth structure to make handles that are extremely secure. The pictures show how it all comes together. (Quiet Friday: Rag Rug Bag shows my first attempt at this feat. Be sure to read the comments. My amazing readers helped me develop the idea for this workable solution.)

As a bonus, at the end of this post you will see a new video that demonstrates my method of cutting fabric strips for weaving rag rugs.

1. Weave bag handles. (First seen on Is My Weft Showing?)

Unwoven warp (length equal to the rag rug warp width on the loom, plus 2″/5cm) comes before and after each of two bag handles, which are woven to desired length. Unwoven warp is held together at the beginning, and in between the two handles, and at the end, with 1″/2.5cm of woven band.

Bag handle woven on band loom. Karen Isenhower

2. Insert unwoven band warp for one handle.

Weave approximately 1/3 of the bag.

Cut the two handle straps apart in the middle of the 1″/2.5cm woven section that separates the two lengths of unwoven band warp. Entering from the right-hand side, insert one unwoven band warp, used here as weft, into the first shed of the double binding weave, with 1/2″/1cm of the band-woven handle strap reaching into the shed. Tap the weft in with the beater, but do not beat it in firmly, yet.

Steps for weaving handle into rag weave bag.

Weave handle into rag weave bag. How to.

3. Insert unwoven band warp for the second handle.

Entering from the left-hand side, insert the unwoven band warp, used as weft, from the second handle strap into the second shed of the double binding weave, with 1/2″/1cm of the band-woven handle strap reaching into the shed. Beat firmly, packing in both layers of weft together.

Weave handle into rag weave bag on the loom.

4. Weave the center 1/3 of the bag.

Step-by-step weaving handle into bag.

5. Insert remaining unwoven warp of first handle.

Repeat Step 2 with the unwoven band warp attached to the handle on the right-hand side. Make sure the handle strap is not twisted.

Inserting bag handles during weaving. Tutorial.

6. Insert remaining unwoven warp of second handle.

Repeat Step 3 with the unwoven band warp attached to the handle on the left-hand side. Make sure the handle strap is not twisted.

How to insert bag handles into the weaving.

7. Weave the final 1/3 of the bag.

Double binding rag rug bag.

8. Finishing work.

Cut rag-weave bag from the loom. Remove header and knot the ends. Press. (For more about finishing the ends, see Quiet Friday: Rag Rug Finishing and Wear and Tear Rag Rugs)

Finishing ends to make bag.

9. Stitch the bag.

Fold the bag, right sides together. Stitch side seams. Turn right side out. For whimsical detail, form box corners on the outside, and stitch in place by hand with warp thread. (You could form box corners on the inside just as well, stitching flattened corners by machine or by hand.)

Creating a rag rug bag.

10. Take your bag with you wherever you go.

Rag rug bag with woven handles. Karen Isenhower

Rag rug bag detail. Karen Isenhower

May your ideas turn into fruitful efforts.

Happy weaving,
Karen

Tools Day: Just Me Bell

Karen

My weaving studio is usually a place of solitude where I can slip into deep concentration. I am counting warp ends; or I am paying close attention to synchronizing shuttle, treadles, and beater for greater efficiency and speed; or I am doing calculations to plan my next project. Or I am examining the cloth on the loom with a magnifying glass, counting picks per inch; or I am trying to wind a quill with just enough, but not too much, yarn. Without realizing it, I get absorbed in my thinking.

Bell for breaking silence before entering studio of concentrating artist.
Old little brass bell hangs in the hallway on the way to the weaving studio.

When I am in this state of being immersed in weaving, I am easily startled by any innocent interruption. My husband has solved the problem of seeing me jump and hearing me gasp when he walks into my concentration bubble. He has hung a little brass bell a few steps outside the doorway to my weaving room. “Ring-a-ling-a-ling…,” the bell quietly announces, “It’s just me…” Now, with fewer incidents jolting me from solitude, I may live longer, as well.

May you welcome those who come near.

Come on in,
Karen

Quiet Friday: Rag Rug Bag

Karen

Think of this as an experiment. A first try. A specimen with which to work out procedures and details. I like the bag, and I will certainly use it; however, there are a few things that I will do differently when I make the next one. And I do intend to make another one, or two, or three. Experiments are like that. One idea leads to another. This warp was all about double binding rag rugs. As always, though, it is delightful to have some warp left at the end for play.

Weaving bag handles into the rag rug bag.
Length of 1-inch/2.5 cm black cotton webbing is woven in. The webbing that extends beyond both selvedges will form the bag handle. Rag weaving continues for a few inches before placing the webbing ends back into the shed.
Placing bag strap ends in the shed.
Both ends of the webbing strap are tapered, and then overlapped in the shed before beating them in.
Temple maintains the weaving width.
Temple maintains the weaving width as the rag weave continues past the woven-in handle straps.
Securing warp ends of rag rug.
Warp ends are secured, as usual. First, square knots, and then cut off to 1/2 inch/1 cm.
Stitching up a rag rug bag.
Sewing the sides of the bag, right sides together. I am using the four rows of woven rug warp at the beginning of the woven hem as my stitching line.
Creating lining for rag rug bag.
After turning the bag right-side out, and pressing the seams open, I created a simple flat lining, with added pocket, to fit inside the bag.
Pinning lining into the rag rug bag.
Lining is pinned into the bag, matching seams and mid-points at front and back.
Lining is inserted into the rag rug bag.
Lining is stitched into place with narrow topstitching.
Rag rug bag, with handle woven in. Karen Isenhower
Voila!
Finished rag rug tote bag! Karen Isenhower
Fun tote bag to carry to and fro.

Next time… Find a strap that is not as stiff, so it will beat in better. Weave in a strap that is the same color as the warp. Make the strap longer. Find a way to secure the cut ends of the strap (this is the biggest issue). Possibly use a band woven on my inkle or band loom for the strap.

What would you use for the strap? Can you think of a good way to secure the ends of the strap together? What other suggestions or thoughts do you have to improve a bag like this? I would love to hear your ideas.

May your experiments lead to fresh ideas.

Always trying new things,
Karen

Welcome! Come On In

Karen

This has been another good year! It is sweet to have friends from all over the globe who walk with me in this handweaver’s journey. Thank you for joining me here. We examine the meaning of life together, along with exploring the technical details of making cloth. I appreciate you, friend!

Double-width blanket on the loom.
Double-width blanket continues.

Thanks to my talented videographer son-in-law, Eddie, you now have a video that brings you into my weaving studio for a visit.

Video filming for Warped for Good.
Camera, lights, filming equipment, the works! After filming many clips of weaving in action and views of yarn and threads, Eddie interviewed me with pertinent questions. He compiled and edited the best shots, and added music, to create a short video describing Warped for Good.

Come on in…

This welcome video is now at the top of the Warped for Good About page.

 (If you enjoy the video, share it with friends by moving your cursor over the “paper airplane” near the top right of the video.)

May your friendships blossom throughout the coming year.

Your friend,
Karen