finishing – Page 23 – Warped for Good

Relaxed Rosepath Rag Rugs

January 10, 2014January 9, 2014 Karen

As soon as the cloth is cut from the loom, the threads begin to relax. On the loom, the warp width for these rag rugs was 27 inches (68.5 cm). How quickly everything can change! Now, spread out on the floor, the width has already narrowed to 25 inches (63.5 cm). In a week or two, the width will have narrowed by another 1/2 inch (1.25 cm). [How do I know? THIS CHRISTMAS RUG, cut from this same warp a few weeks ago, is now 24 1/2 inches (62.25 cm) wide.] Since all the looming tension is over, these rugs can just lay back and relax. Haha! That’s how I feel whenever a few demanding weeks or months finally come to a close.

Rosepath Rag Rugs just off the loom! — Not yet cut apart, three new rosepath rag rugs await final finishing. Wefts will be secured by tying warp ends into knots; and hems will be pressed and stitched.

We do need the experiences that stretch us, and we need the relaxed times as well. Life will always have its ups and downs, but there is one thing that brings consistency through it all. Faith. Faith looks back and remembers being rescued; and faith looks forward into the unknown with courage. A life of faith is a life that is full. Not full of stuff or projects, but full of meaning.

Love. Belief. Joy. These are the gifts we bring to our rescuer. Our faith in him is rewarded with his own nearness. So, whether stretched or at ease, we know with confidence that we are loved.

May your faith be renewed.

Love,
Karen

The Secret to Making Lattice Fringe

November 22, 2013October 9, 2014 Karen

First, a short tutorial for tying ~~perfect~~ lattice fringe, and then some thoughts about keeping our eyes open to reality. I decided to tie three rows of knots with this fringe for a pretty lattice effect, knowing the results are worth the time it takes.

How to Tie Lattice Fringe – Step-by-Step Tutorial

Supplies:

7/8″ (2 cm) blue rigid foam insulation (mine is Dow Styrofoam Residential Sheathing Insulation, found at The Home Depot or Lowes), cut to 32 x 36″ (81 x 91 cm) (This great idea came from Thrums, one of my favorite weaving blogs.)
16 straight pins
7/8″ (2 cm) warping slat (or template of desired width)

1. The first row of overhand knots has been tied. (More detail HERE.) Lay the fabric over the foam board, with the fringe laying toward you at the front of the board.

2. Place a straight pin through the top thread of each of several knots in a row, into the foam board under the fabric.

3. Use warping slat (or other template) as as spacing guide for the second row of knots. Lay warping slat flat, and place it flush against the row of pins. Using the width of the warping slat as a spacer, place a pin in the second row just below the slat, at the point where the knot will be formed.

4. Remove warping slat. Loosely tie an overhand knot below the just-placed pin in the second row, leaving the center of the knot wide open.

5. Insert another pin through the center of the knot just a fraction below the point of the first pin.

6. Slowly pull the knot to cinch it up to the point of the second pin.

7. Holding the knot firmly between the fingers of one hand, with your other hand gently tug each strand of the knot to its full length.

8. Continue tying knots across the entire row.

9. Repeat the process to add another row of knots.

My confidence in my ability to tie these knots can drift into careless thinking. Maybe I’m good enough at this that I can leave out some steps. Do I really need that guide stick for spacing the rows? I think I can eyeball it. Pulling each strand to close the knot takes too much time. Why don’t I just skip that part? And soon, I am blind to the haphazard results I am creating. Pride is like that. In relationships and in life circumstances, though, the consequences are more severe than in fringe-tying.

Pride keeps me from seeing my own vulnerabilities. Pride puts me in harm’s way because it blinds me to the reality of my own shortcomings, and makes me think I’m above it all. I want to keep my eyes open to my need to learn and grow. Who wants to drift into haphazard results in life? Not I. Not you, either?

May you never be blind to the things that matter.

Feeling vulnerable,
Karen

You Thought You Were Finished?

November 19, 2013October 9, 2014 Karen

Tying the fringe into careful overhand knots is taking longer than the time it took to weave the three-yard-plus length of fabric. I would rather just do the weaving part. But without clearly defining the edges of the woven cloth by securing the ends, the whole fabric is at risk of unravelling. (To view this alpaca/Tencel throw on the loom, click HERE and HERE.) We form distinct edges on our life’s fabric through the interactions we have with people around us.

Tying fringe on handwoven lace weave alpaca shawl. — Each knot of six warp ends were carefully tied around a straight pin, snuggling the knot right up to the edge of the fabric. As the knot is tied, I gentle pull each strand individually, which secures the knot and gives an even finish.

With relationships, it is tempting to take the easy way out. Quicker, painless, and less stressful. But it is the challenges from other people that help define who we are. Without the clarity of knowing what we stand for, we are at risk of falling for anything. Don’t avoid the often tedious work of making sure all your ends are secure.

Our challenges to each other sharpen us, finishing us for a greater purpose. Like iron sharpening iron, it is the abrasion that sharpens us, defines our edges, and brings the point of our lives into focus. All those loose ends tied into knots–ahh, the process is worth it.

May your finishing edges be as beautiful as you are.

With a few more loose ends,
Karen