The Glimåkra Standard is where I am most comfortable, even though the reach of the full width is stretching me. The curtains for the bathroom are progressing. No new news, just continuation of adding cloth to the cloth beam.
Still weaving this M’s and O’s curtain yardage. Looking forward to the day the curtains will hang in our remodeled bathroom.Fabric is adding up on the cloth beam.
The Glimåkra Ideal is patiently waiting for a new tapestrywarp. I have a bit more design work to do on the cartoon, and then I’ll be winding the warp with the 16/2 linen I have set aside just for this project. I’m eager to show the new tapestry idea to you! Soon!!
I am finishing up the next critter napkin design for the drawloom. This one is a roadrunner, and it is just…about…ready…to weave.
The Glimåkra Julia is getting filled up on the cloth beam, too. This wool goose-eye fabric is going to be fun to sew into a winter cape when it comes off the loom!
I like to check on the cloth beam to see how it is filling up. You can see there is still more warp on the warp beam.Julia with four shafts. Ribbon pinned on the side has marks that help me keep the diamond pattern square.
And finally. Drumroll. After a year of sitting on the sidelines after having been cut from the loom, two small tapestries are now hanging on our walls. I did the finishing work of adding a slat for hanging, stitching a backing in place, including some zigzag quilting stitches for support, and stitching up the sides and the hem.
Beginning to mount the tapestry by adding a wood slat at the top.Backing is added to the back of the tapestries. Zigzag stitching at the top helps secure the tapestry so it will not sag. One small nail will hold the tapestry to the wall.Heaven and EarthIntricately Created: Delicate Wing of a Monarch Butterfly.
It is good to finish, even if you do it a year later. Now I am really ready to start the next tapestry.
Every now and then I forget where I left off. This happens when I get interrupted when I am not quite finished with a sequence at the end of a weaving session, or when I get interrupted when I am just getting started back on the loom. Often, the interruptions are my own thoughts going in different directions. The only loss is a few dozen weft threads that get pulled out one by one, plus the time it takes to pull them out and weave the right ones back in. Everything is fixable.
Sometimes it is necessary to backtrack. I was at a pause in weaving. When I came back to it I forgot to put in the gray weft stripe. Pulled out more rows than I wish, then resumed weaving, starting with the gray stripe.No more troubles, just attentive weaving.Still several meters to go on these bathroom curtains! 24/2 cotton, M’s and O’s, gray stripe is 16/2 cotton
I have come to the unfortunate realization that I am probably short on blue weft yarn and green weft yarn. This project is using yarn from my excess, and the warp yarn was measured out just so. I miscalculated on the weft yarn. My solution is to space the blue and the green weft stripes further apart. If I still run out of either color I will finish with the colors I do have. I may end up liking it better that way. Everything is fixable.
Blue weft at the front edge makes a lovely contrast with the poppy and the pumpkin warp colors.Cart by the loom holds shuttles and yarn. You can see that I am using a 120 cm reed in a 70 cm loom. I can get away with it by having the loom in the corner of the room.Winter wool indoors and spring blooms outdoors. Brage wool for an autumn/winter cape. Goose-eye twill on four shafts.
I did not imagine that one of the single-unit draw cords on the drawloom could snap in two while I am putting it on the hook bar. But it happened! Now what? I’m able to finish the 6-thread unit by tying a knot and maneuvering threads this way and that way. This is not acceptable for weaving the rest of the warp, however, nor even for the rest of this napkin. I just so happen to have a fancy clip that Steve brought to me a couple weeks ago, saying, “I thought you might be able to use this somewhere.” It is the perfect temporary fix for this shortened draw cord. I will replace the broken draw cord before starting the next critter napkin (roadrunner). Everything is fixable.
Wild turkey is running with his head cut off for a few days. The single-unit draw cord that raises the threads at the turkey’s chin snapped when I put it on the hook bar. I finished the 6-thread unit for that chin by tying a knot in the end of the draw cord. I need to make a permanent fix, though, because the knot makes the draw cord just a little too short.As a temporary fix, I found a double caribiner clip that is just the right size to hold the draw cord. Before I start weaving the next critter, I will try to replace this broken draw cord with a new one.Wild Turkey – finished!Chart beside the loom shows my row-by-row plan for the image being woven.
Yesterday we enjoyed Easter, the day of celebrating the resurrection of Jesus Christ from the dead. We are lost without Him, suffering from our own errors, miscalculations, and brokenness. The Heavenly Father raised Jesus from the dead to prove to us that Jesus is Lord. Everything is fixable in Him.
Three looms are active right now. The drawloom has the napkin project, with a wild turkey on this one.
Wild turkey feet and legs weave up quickly. There are only a few single unit draw cords to pull at a time, plus one pattern shaft draw handle for the side borders.Wild turkey feathers require many more single unit draw cords. Even the borders at this place in the pattern are done with single units. The cast shadow on the loom from the bell that hangs in the window makes a funny face at this time of day. Could be a silly turkey face? 🙂
The Julia has the wool goose-eye twill fabric that I plan to use for making myself a simple winter cape. Next winter should be here soon enough.
Last but not the least at all is the Glimåkra Standard with curtains for our remodeled bathroom. This is a big project and I will be weaving on this for a while. M’s and O’s is enjoyable to weave. I like the counting for the squares and stripes, and the trading off of feet that this project gives me.
I like goose-eye twill. Do you? I’ve woven it in throws, towels, and rag rugs. I am not sure why this is such a pleasing pattern to me. Maybe because it speaks of classic simplicity.
Brage wool yarn is threaded in the heddles for goose-eye twill.Testing the pattern. I want the goose-eye diamond to be “square,” so I will weave further to get a consistent beat. Then I will count how many rows it takes to make the diamonds “square.”
I have woven goose-eye twill with and without floating selvedges. This time is without. The advantage is that I can get a cleaner edge without floating selvedges. The disadvantage is that I can get messier edges without floating selvedges. It takes me a little practice to get the selvedges just right, catching some of the outer warp ends. After I get it down, the selvedges will be pretty tidy.
Squares of goose eyes make the overall pattern for this fabric that I hope to make into a small cape for myself. I am using yarn that I had on my shelf. The blue warp stripe is a little too loud for me, but it is what it is, so I’m going to make it work.
Persistence means you keep working at it until it works. And you overlook things (like the blue warp stripe) that it’s too late to change, and make the best of it. Persistence is a virtue when we persist with right things. Persist in faith. Persist in love. And always, persist in hope. Jesus waits for those who persist in leaning on him. Let’s lean in a little closer.
How much more thread will a 13cm quill hold than an 11cm quill? In other words, how much further can I weave with the longer quill? I decided to do a simple test to find out. Which size quill should I use for the rest of this project?
Red threads give me precise start and stop points for measuring how far I could weave with one quill. I will pull the red threads out when I cut the fabric from the loom.
First, I mark the beginning of the 11cm quill with a short red thread woven through a few ends on the same row as the first row of weft from that quill. I weave off the thread from that quill and weave in another short red thread on the final row of the quill, putting the second red thread directly above the first red thread. Now, I can measure the distance that the quill’s weft covered the warp, minus the gray weft stripe. I repeat the test with another quill so I can average the difference, if any. I find that both quills cover exactly 6 cm of warp. How’s that for consistency in winding my quills?
I started with 11cm quills because that is the size that fits the shuttle I wanted to use.
Time to test the 13cm quill. I do this exactly the same way, including the repeat test. The result? The 13cm quill covers 7.2 cm of warp. So there is 1.2 cm difference between the shorter quill and the longer quill.
Each quill measured twice. This view is from below the breast beam since I forgot to take a photo before I advanced the warp. This perspective also gives a view of more of the M’s and O’s cloth and the potential for specially-made curtains.
I have a total of 8.6 meters to weave on this curtain fabric (about 1.5 meters already woven). That means winding about 143 quills (11cm), or 119 quills (13cm). Not much difference, really. Still, I’m in favor of winding 24 fewer quills of 24/2 cotton. Aren’t you?