Tag: Glimakra

Always Something to Weave

Karen

One mat finished, and one to go. Time to take a short break to consider my next move. A few ideas are circling around–fabric strips, two short mats instead of one long one, treadling variations. In the meantime, the other loom has warp for more rosepath rag rugs waiting for me. It’s good I’m not in a hurry.

Eight-shaft block twill mat.

Keep weaving,
Karen

Never Say Never–Floating Selvedges

Karen

I never use floating selvedges. Well,…almost never. For this block twill it does make sense to “float” the selvedges. The outermost warp ends are not threaded in the heddles–they “float” in the middle of the shed. The floating ends are wound on to the back beam with the rest of the warp. The floating selvedges provide a consistent woven edge, and prevent the skipped threads that would normally occur at the selvedge on an eight-shaft block twill. My ski shuttle enters the shed under the floating warp end, and exits the shed over the opposite floating warp end.

Floating selvedge for 8-shaft block twill mat.
Outermost warp ends are not threaded through heddles. When a treadle is pushed, the floating selvedge threads do not go up or down with the other warp ends.
Weaving with string yarn, and using floating selvedges.
Enter the shed under the floating selvedge. The curve of the ski shuttle easily slips under the floating selvedge.
Ski shuttle and floating selvedges.
Prepare to catch the shuttle by holding the floating selvedge down with your fingers.
Ski shuttle and floating selvedges.
After the tip of the ski shuttle has crossed over the floating selvedge, continue bringing the shuttle through.

It is not unusual for the Lord to wait until I’m quiet before he answers. I may gripe about the obstacles, and try to wish or pray them away. But the Lord gently moves the shuttle under or over the floating selvedge to accomplish his work. For him, it is not an obstacle, it is a necessary part of creating this kind of cloth. When I get quiet, I can see what he is doing. And it is good.

May you know when to be quiet.

Yours Truly,
Karen

Simple Eight-Shaft Twill?

Karen

This eight-shaft twill, woven with string yarn weft, has a delightful raised-surface texture. The distinct pattern makes it interesting to weave. The treadling is /5.6.7.8./ /1.2.3.4.5.6.7.8./ /4.3.2.1./ /8.7.6.5.4.3.2.1./ This sequence completes one full diamond in the pattern. Simple enough, right?

Raised surface of eight-shaft twill, woven with string yarn weft.
Ski shuttle is able to hold a large amount of the string yarn weft. The string yarn produces a raised surface on this eight-shaft twill.

Simple, but not easy. The treadling reverses direction every twelve picks. I can’t tell you how many times I forget which direction I am going. When I make an error, I don’t see it until I’m two or three inches past. I’ve had to undo and do over several times. But when I get it right, for longer and longer stretches, it is a satisfying weaving experience. Everything on the loom is set up for my success. It’s the internal and external distractions that keep me from experiencing the best.

Midi stringyarn for weft in woven bathmat.
Midi stringyarn has about 26 fine strands of cotton thread grouped together.
Eight-shaft twill woven bath mat. Karen Isenhower
Terra cotta tiles come to mind…

We want life to be satisfying. My soul longs and searches for living water. Internal and external distractions keep me from getting a satisfying drink, but God has everything ready for me when I come. Our souls were made to long for God. Is he really there? Yes, the Grand Weaver is. There is no better way to explain the warp on the loom.

May your distractions disappear.

Happy weaving,
Karen

Below the Warp

Karen

Important things are happening below the warp on my eight-shaft countermarch loom. Eight upper lamms, eight lower lamms, and eight treadles beneath the lamms are at work. Shaft cords connect shafts to lamms. Treadle cords connect lamms to treadles. When the loom is all tied up, stepping on a treadle raises some shafts and lowers others, making it possible to send the weft across in a shuttle. And weaving happens.

Countermarch loom tie-up.
Heddles line up like soldiers, holding each warp end in place. Shaft cords reach down from the lower shaft bars and are attached to the upper lamms with little Texsolv anchor pins.
Tying up Glimakra Standard countermarch loom.
Treadle cords hang loose from the upper and lower lamms, each cord in its proper position.

Everything below the surface matters. When you start weaving, it won’t take long to see if all the connections work. When everything behind the reed and underneath the warp is set up properly, you can expect a pleasant weaving experience.

Tying up countermarch treadles.
Treadle cords reach down to the treadles to finish the line of connections. Cords are threaded onto a sharpened dowel beneath the treadle to hold the cords in place.

Joy is evidence of what is happening below the surface. You can see joy on the face of someone who looks to the Lord and trusts in Him. Joy is more than a smile. It’s a radiance that starts on the inside. Trusting in the Lord produces positive connections below the surface. That deep trust is formed through life’s most difficult moments– joy that is cultivated there endures. Like weaving on a countermarch loom, joy depends on true connections.

May you have reasons to smile.

Joyful Weaving,
Karen

Those Little Heddle Eyes

Karen
Threading heddles on eight shafts requires a different approach than my usual four-shaft routine ( You Can Prevent Threading Errors). With four shafts, the heddles fit nicely between my five fingers. I would need nine fingers on my hand to thread eight shafts in the same manner. The important thing is that every warp end gets inserted through the correct heddle. I have to position my loom bench and adjust the height of the shafts. I need to be able to see and feel the heddle eyes …all the way to the back shafts. I take the warp ends in strict order, as they lay in the lease sticks, and insert each one through the correct heddle.
Threading eight shafts. Glimakra Standard loom.
Warp ends, threaded in pairs, go through heddle eyes in a specific order.
Threading an eight-shaft block twill.
Threading is complete for this eight-shaft block twill.
It can be a struggle to find that little heddle eye on the first shaft, way at the back, but you keep at it until you find it. Temptation is a trap, and we all get caught. There is a way out. All the warp ends have a way out…through the heddles. Look for the exit that God provides. And then run through it. You’ll find yourself in the right place at the right time. And the need for explanations and excuses is gone. With the warp threading completed, we know our Grand Weaver is ready to weave something marvelous.
May your threading errors be few.
Love,
Karen