Check for Accuracy Now or Backtrack Later

It pays to check your work. I have reached a new level of experience in distributing patterns shafts. I know how to do it backwards and forwards now. Literally. Unfortunately, I moved almost all of the pattern shafts before noticing that the spacing between units is not quite right. Uh oh! So, one by one, I reversed the distribution of pattern shafts to get back to the point of error—the very beginning. The reverse move was …more complicated.

Distribution of pattern shafts is part of the setup for the drawloom. It is a multi-step process that moves the pattern shafts, one at a time, from the heddle bar at the back of the loom to the pattern shaft holders just behind the ground shafts at the front of the loom. Sound complicated? It’s not that hard, and is fun to do after you’ve done it a few times.

Lesson learned: Check my work. I am off by only one unit of threads. That small miss, however, is enough to sabotage the whole project if not corrected. The sooner I check my work against the master plan the better. Fortunately, everything at the loom is fixable. It’s never too late to start again.

First, I use an old inkle band to slip between heddles that I am separating to transfer to a pattern shaft. Because I am using a combination of pattern shafts AND single units, I separate the heddles on the “front” side. If I were usining only pattern shafts and no single units, I could separate the heddles from the back while standing behind the loom.
I insert a pattern shaft through the separated pattern heddles. Then I remove the inkle band and hang it around my neck, ready for the next transfer.
I slip the waiting heddle bar through the pattern shafts that have not been separated…
…and remove the first heddle bar. This releases the separated pattern heddles onto the pattern shaft, which is hanging in a pair of holding cords. From here, the pattern shaft is moved forward to the pattern shaft holders. (I also adjust the clip overhead that connects the thread unit to a single unit draw cord.)
After backtracking and starting over, I now diligently check the number and spacing of units on the heddle bar after every pattern shaft is moved into position. Success!
Twelve pattern shafts, plus one X shaft. This project uses pattern shafts for the borders only – top, bottom, and sides. The rest of the pattern areas will use single-unit designs.

The sooner I check my life against God’s master plan the better. Fortunately, everything is forgivable. It’s never too late to start again.

All set and ready to go! Everything works. After a bit more testing of weft colors and patterns, it’s critter time. Watch for Mr. Armadillo first!

May you check for accuracy sooner than later.

Be blessed,
Karen

Weaving a Few Critters

I am imagining Texas hill country critters (and birds) that will make their way onto the family napkins I’m getting ready to weave. I am thinking of an armadillo, a jack rabbit, a gray fox, a roadrunner, a Texas longhorn, a Texas spiny lizard, a black-chinned hummingbird, and a few more. Designing each image for the drawloom is fun. Just wait till you see the armadillo!

All the pattern heddles have been threaded.

Preparation makes way for imaginative creativity. This is why I enjoy all the drawloom prep.

Six ground shafts hang in front of the pattern heddles for threading. Heddles on the ground shafts are long-eye heddles, which make threading a breeze.
Threading ground shafts is almost complete. I will move the six shafts to the front of the loom to hang from the countermarch. After that, I can start positioning the pattern shafts. And then…weaving those critters!

Everything we do today is preparing for something tomorrow. Enjoy today. Look forward to tomorrow.

What critters (or birds) would you include if you were designing these napkins? Tell us in the comments!

May your creativity soar in relation to your diligent preparations.

Happy weaving,
Karen

IMPORTANT NEWS for Those Who Receive Warped for Good by Email:
Email subscriptions are ending April 11, 2023. Warped for Good posts will not arrive by email after that date. Stay tuned! I will tell more about this change next week.
IMPORTANT NOTICE: Warped for Good is the story of my weaving journey and is NOT ending! I will continue to share my weaving adventures right here.

Creative Handweavers Need Persistence

It’s good for a handweaver to flow in creativity. That’s where designs, colors, and out-of-the-box thinking thrive. Add the virtue of persistence, and those creative ideas become tangible articles of cloth. Making things takes more persistence than it does creativity.

Threading pattern heddles. 22/2 cottolin warp.

Threading pattern heddles is a repetitive task that I enjoy. I find greater joy, though, in the actual weaving phase of the project. That is when I get to sit at this marvelous instrument and challenge my hands and feet to work together to make the glorious sounds of a loom producing patterned cloth. It does take persistence to get to that point. Even when weaving, my focus is on the outcome – creative napkins for our family meals. The end purpose not only drives my persistence to the finish line, it brings enjoyment to each necessary task along the way.

Will be napkins with fun designs. Green, with gold borders, and various linen weft colors.
Near the halfway point of threading pattern heddles. Six ends per unit.

You and I are God’s creative work. He is persistent in the forming of our character, desiring to weave the image of Christ in us. His end purpose brings meaning to all the steps it takes to complete the fabric. Imagine his enjoyment every time we allow his hands to do each necessary task.

May your persistence out pace your creativity.

Blessings,
Karen

Handwoven Napkins for Real People

I have never woven napkins because napkins that are used get soiled. Why spend time weaving something you have to be so careful about? That is about to change. I am dressing the drawloom for napkins!

Drawloom 22/2 cottolin warp is beamed.

The napkins I have in mind are family-friendly napkins for all ages. They will get soiled, of course. They are made with grandchildren in mind–Cottolin warp and linen weft. I have a fun design for each napkin. And we’ll be ready to wipe any messy mouth. Napkins are made to get soiled.

Next step is to tie ends into threading groups to prepare for threading.

Wisdom is marked by a sense of calm. There is no dread of something ruining the day. If a little (or big) person soils a napkin, so be it. That will just serve to add a bit of history to the cloth. With a little wisdom, I’ll remain undisturbed.

May you listen to wisdom.

Happy weaving,
Karen