Tag: plain weave

Shuttle Catching

Karen

I am already a quarter of the way on this baby wrap. Simple plain weave with one shuttle is fast and uncomplicated, making this the perfect setting to improve weaving technique. Surely, I can gain efficiency by examining some of my practices.

First quarter woven on baby wrap.
Twill tape has marks that show 1/4, Mid (1/2), and 3/4 of the length of woven baby wrap. The first quarter used about seven full quills of light blue weft.

Under scrutiny, I see that I am not consistent in how I catch the shuttle. It makes a difference where I make contact with the shuttle as it glides into my hand. I often have to reposition the shuttle in my hand to prepare it for the return throw. That’s not very efficient. Solution? Look at the hand that is catching the shuttle. All I have to do is turn my head to look, and the hand does the job. It’s amazing how that works. It pays to pay attention.

Beginning sample comes around the cloth beam. Baby wrap.
Beginning sample meets the cloth beam. View is from the front of the loom, looking under the breast beam.

Following Jesus can be compared to finding a breakthrough in weaving technique. It’s more than just meeting him, and trying to go the right way. That is weaving by habit, doing it like I’ve always done it. Jesus gives all to those who give him all. Breakthrough comes when I give up my habits to find a better way–his way.

He is no fool who gives what he cannot keep to gain what he cannot lose.

– Jim Elliot

May your eyes help your hands.

With love,
Karen

This Time in Color

Karen

Thick and thin in color. The appeal for me is that something so simple can look so complex. How can plain weave do this? By having thick and thin threads that alternate in a certain way. Add color, and the options multiply!

Thick and thin on the loom, using double bobbin shuttle.
Double bobbin shuttle carries the thick weft. 30/2 cotton for the thin weft adds texture and complexity to the plain weave.

For the thin thread, I use 30/2 cotton. This very thin thread has a big impact on the fabric design. Strategically placed in the warp, it helps define the two blocks. Repeating the thin thread in a weft sequence is what produces a block change while weaving. The thin threads are integral to the design, yet they will barely be noticed after the fabric is wet-finished.

It is fascinating how much impact little things have. Character is revealed in the very little things. It’s the special touch you add, the extra time you give, the kind thoughts you think. It’s how you are at home, doing ordinary things for your family. It’s who you are, what you are thinking, and what you are doing. …when no one is noticing. These are the little things that tell who we are at the core. Faithful in little; faithful in much.

May all your little threads fall into place.

With you,
Karen

How to Strip the Fun out of Weaving

Karen

No fancy stuff for this rug, like rya or loops. The main thing is to finish off this warp. I am eager to get on to the next project–monksbelt (munkabalte)! Even so, it is good to enjoy what you are doing, to be happy and content with what you have and where you are. There is no use complaining about having to finish this. …even though something else seems more exciting.

Simple rag rug on Glimakra Standard.
Simple rag rug using neutral colors. Dark weft stripe is produced by two consecutive rows of a dark brown print fabric as weft.

A grumbling attitude can strip all the joy from the current process. Grumbling poisons your thinking. It starts as a small complaint, but is never content to stay small. In fact, grumbling spreads to other people and corrupts their desires, too. Better to refuse it before it has a chance to begin. Notice and enjoy the blessing of the moment you are in. And so far, I haven’t found a rag rug I didn’t enjoy weaving. Now that’s a blessing!

May your attitude be worthy of imitation.

With contentment,
Karen

Quiet Friday: Handwoven Skirt

Karen

I just crossed an item off my weaving bucket list! Make a ‘cello skirt from handwoven fabric. A ‘cello skirt must be long, and full, and pretty. And if I can wear boots with it, so much the better. A favorite tiered skirt that I made a couple years ago from commercial fabric became the pattern for designing the handwoven fabric for a new skirt. This project included weaving a printed design by stamping the warp on the loom before it was woven. (To see this project develop, check out Related Posts in the sidebar.)

Printed fabric collects on the cloth beam.
Printed fabric collects on the cloth beam. One last round of warping slats is seen on the back beam.

I needed five lengthwise tiers, so I planned it out so that each tier would have a different stamped pattern. This is light blue 8/2 cotton in plain weave, with a dense sett of 30 epi, making a medium-weight fabric. I softened the fabric as much as possible by washing and drying it on hot settings. By strategically placing selvedges at the top and at the bottom of the skirt, I was able to minimize thickness at the waist, and eliminate the need for a hem at the bottom. The finished tiered skirt is long, and full, and has a subtle pretty printed pattern that mildly resembles ikat. And this skirt is made for wearing with boots!

Printed fabric just off the loom - for making a 5-tiered skirt.
Just off the loom, cloth is rolled out on the floor. Five-tiered skirt was made from lengthwise rows of printed fabric.
Layout for handwoven tiered skirt.
Tiers are cut and raw edges serged. Each tier seam is sewn. Floor layout helps to plan placement of seams and printed patterns.
Grosgrain ribbon for elastic casing in handwoven skirt waistband, reducing bulk.
Bulk is reduced at elastic waistband by adding pretty grosgrain ribbon for the casing, right next to the handwoven fabric’s selvedge.
Warp-stamped fabric for skirt. Selvedge at bottom, so no hem needed.
Selvedge forms the bottom edge of skirt, so no hem is needed. Warp-stamped fabric appears as a subtle print.
Handwoven printed tiered skirt. Karen Isenhower
Happy ‘celllist.

May your heart be enriched with thankfulness.

Happy Thanks Giving,
Karen

Warp Stamping Is Over

Karen

If I could do it over, I would put on a shorter warp for this experimental project. I enjoyed weaving plain weave, with the simplicity of one shuttle and one color. I did not enjoy, however, stopping every six inches to stamp the warp with paint. Clearly, I am not a paint person.

End of the warp is a happy sight!
Bare warp beam, with the end of the warp inches away from coming over the back beam for the final stretch of weaving.

You can guess that I was overjoyed to see the tie-on bar come over the back beam! That hope of finishing propelled me to the end. Of course, I still have work to do–fixing a few floats, wet finishing, and then sewing a tiered skirt. The root of my problem was not that this was long and slow. The root was my uncertainty. Isn’t that always the case? Is all this effort and mess going to be worth it? Will this fabric even work for the skirt I want to make?

Warp was stamped on the loom, using fabric paint, before it was woven.
Printed woven cloth, just off the loom, awaits finishing and sewing. The print was made by stamping the warp on the loom, using fabric paint, before it was woven.

When we are stumbling in the dark, we long for light. It can be discouraging when you are not sure where your decisions will take you. The light of God shines in the darkness, bringing hope. Hope dispels darkness. Much like the tie-on bar at the end of a long warp, when we see hope rounding the corner we know we can make it.

May your path be lit with hope.

By the way, if you are a paint person, I have a set of gently used hand-carved wooden stamps I will send to the first person in the continental U.S. who asks for them. Postage is on me!
Get in Touch to let me know you’d like them.
*UPDATE*
The stamps have been spoken for! Sandy O. is going to use them to experiment on her rigid heddle loom!

Happy plain weaving,
Karen