Cutting Off a Failure

I made an embarrassing blunder. No wonder this Tuna wool resists all my efforts. It’s the wrong yarn! Tuna is 6/2 wool—twice as thick as the 6/1 wool I should be using. Cowboy Magic won’t solve this sticky problem. (I thought it would, as I expressed in this post: Tame the Wool.)

The yarn is gorgeous, but my frustration level is pushing me to throw in the towel. I tried hard to make this work. I was so convinced I had the right yarn that I missed it even when reader Joan left a gentle comment asking if 6/1 Fårö yarn would work (I’m sorry for not listening, Joan). There is nothing left but to cut off this failure.

Cutting off out of frustration.
Every shed is a struggle. It seems impossible to get a clean shed with this “sticky” yarn. (It’s not the yarn’s fault, though.)
Cutting off a failure. Ouch!
Failed piece is cut off. There are unwanted floats everywhere, and the fabric is like cardboard because of the tight sett.
Cutting off a failed double weave project. Ugh.
Bottom of the double weave has even more unwanted floats than the top layer.

In this lowest moment a thought occurs to me. Re-sley the reed. An ounce of hope rises.

Re-sleying to a coarser sett. Hoping for success.
Reed is changed from 50/10 metric to 40/10 metric. This spreads the warp an additional 19.9 cm (7 3/4″).
Wool for a double weave blanket. Second try.
Sleying is complete and the new reed is placed in the beater.
Wool warp for a double weave blanket.
Warp is tied on and leveling string is tightened. On your mark, get ready, get set…

I re-sley to a coarser reed and tie back on. I hold my breath and step on the treadles. It works. And it’s gorgeous!

Double weave wool blanket on 12 shafts. Glimakra Standard.
Go! Night and day difference in being able to clear each shed.
Double weave at its finest. Wool blanket.
Double weave at its finest.
Weaving into the sunset!
Weaving into the sunset.
Double weave Tuna wool blanket on Glimakra Standard. Success!
Clean lines of double weave, with a (very) few unwanted floats that will be easy to fix later.
Double weave wool blanket. Success after starting over!
This is now a pleasure to weave!

Have you experienced great disappointment and loss of hope? Sometimes our own failure brings us to that point. The Lord makes things new. We come to Jesus with our failed attempts, and he exchanges our used rags of effort with his clean cloth of righteousness. In his forgiveness, the failure is cut off and removed. Our threads are re-sleyed and re-tied to make us gloriously new.

May you know when to cut off and start over.

Love,
Karen

Tame the Wool

I am in Germany this week, but before I left home I started the blue wool blanket. Twelve shafts and twelve treadles is challenge enough. Double weave with a sett of 5 EPC (12 EPI) per layer in 6/2 Tuna wool adds to the challenge. This wool stubbornly clings to itself in this sett. I don’t care to fight defiant wool to get a clean shed on every treadle! I could re-sley to a coarser sett. But I want to keep the sett as is, as written for this project in The Big Book of Weaving, by Laila Lundell. Cowboy Magic to the rescue! I discovered this horse mane detangler when I wove a mohair throw a few years ago. It rinses out nicely in the wet finishing. It worked magic for me at that time. Now, with a small amount of slick detangler on my fingers I can tame these blue wool fibers. Voila! No more fighting to get a clean shed.

Cowboy Magic to the rescue to tame wool yarn double weave.
Twelve treadles means clearing and adjusting the shed twelve times just to get started. Before Cowboy Magic, I had to run my hands through the shed to clear it each time. That’s asking for trouble–and skipped threads all over the bottom layer.

Now I have something to look forward to when I get home.

Blue wool double weave blanket on 12 shafts.
Twelve shafts gives me three blocks in this double weave small blanket. I think it will be a very pretty addition to use in our little Casita Travel Trailer on cool evenings.

May you eliminate unnecessary fighting.

Weave Happy,
Karen

Tools Day: Reeds

Eventually, I would like to have a metric reed (or two) in every possible size. Until then, I will be happy with what I have, while I gradually add to my supply, as needed, one reed at a time.

I prefer metric reeds (dents per 10 centimeters) over imperial reeds (dents per inch). For one thing, the math is easier for project planning. And because there are smaller increments between sizes, there are more sett choices with metric reeds. It could be my imagination, but it often seems that the metric reed yields a Goldilocks “just right” sett.

Assortment of weaving reeds.
Supply of reeds. Some purchased new, some second-hand purchases, and some received as gifts. All but one have been used on my looms. The reeds usually reside in my weaving supply closet.

My selection of reeds vary in length, from 70 cm (27″) to 120 cm (47″), to fit the weaving widths of my looms. But Glimåkra countermarch looms have beaters that are open on the sides, so I can use any length reed in any loom.

Beginning cotton warp with M's and O's.
Reed with 120 cm weaving width is being used on this 100 cm Glimåkra Ideal. This is a 22.5 dents/inch reed, sleyed two ends per dent. Notice that the warp is high in the reed? That’s because the front tie-on bar is going over the breast beam.

My all-around favorite reeds are those made by Glimåkra because they are lightweight and easy to handle, …and they come in metric sizes. (Of course, you need to choose reeds that work with your loom.)

Taqueté in Tencel on eight shafts.
This 120 cm reed is a perfect fit for the weaving width of the 120 cm Glimåkra Standard loom. This is a 50/10 metric reed, giving a Goldilocks “just right” sett for this 8/2 tencel taqueté.

I put together a reed conversion chart so that we can see our options at a glance. You never know when a new project will “require” a new metric reed!

Weaving reed metric/imperial conversion chart.

May your next project have a Goldilocks “just right” sett.

Happy weaving,
Karen