Tag: warping

Tools Day: Color Wrapping

Karen

Linen singles line up for a new warp to make lace weave scarves. I have only one tube of each color. This makes an interesting challenge, since I wind warps with two threads together. Adding to the challenge, I am requiring myself to use all six colors. How will the colors behave with each other? What order should I put them in? Color wrapping is a fun way to find answers.

Making color-wrapped cards for planning linen warp.
Playing and planning with color by wrapping threads on index cards.

First I will select one color-wrapped card as “winner.” And then, I will decide whether to repeat the narrow stripes on that card across the warp, or spread the chosen stripe sequence over the width of the warp by expanding each of the narrow two-color stripes.

Color wrapping with linen to plan warp.
Cards wrapped with 16/1 line linen to view warp possibilities.
Color wrapping to plan linen warp.
Each narrow stripe is two colors paired together. (Click on photo to enlarge.)
Color wrapping shown in black and white to see balance.
Black and white gives a view that shows the balance of dark and light.

Color wrapping supplies:
Index card, folded in half lengthwise
Double-stick tape

  • Place a length of double-stick tape on one side of the folded index card.
  • Starting on the back of the card (the side with tape), stick the end of a thread (or two threads, as in these examples) to the tape.
  • Wrap the threads around the card, aligning the threads right next to each other, sticking the thread to the tape on the back each time around.
  • Experiment with different arrangements of colors, and vary the width of stripes as desired.

Which of the six color wrapping examples would you choose for an eye-catching lace weave scarf? And would you repeat the sequence across the width of the warp, or would you spread the sequence out over the width of the warp? Share your thoughts and ideas in the comments.

May you discover more options than you know what to do with.

Happy Coloring,
Karen

Quiet Friday: Checkered Rug

Karen

I have another rag rug warp on my Baby loom (Glimåkra 100cm Ideal), playing with the magic of double binding again, this time with four shafts and four treadles. Ten yards / nine meters of warp. I planned an additional twelve inches / 30.5cm between rugs for cutting off and tying back on, so I can cut each rug off as it is finished. Here is the first rug.

Winding warp for another rag rug.
Small warping reel is used to measure the ten yards / nine meters of 12/6 cotton rug warp.
Beaming the warp under tension, using warping trapeze and weights.
Warp chains are undone and lengthened out over the warping trapeze. Several pounds of walking weights hold the bouts under constant even tension for beaming the warp.
Tying on.
All tied on. Ready to weave.
Designing a rag rug.
Design concept is created; and fabric colors are chosen.
Double binding rag rug on the loom. Karen Isenhower
Progress.
Using a temple for weaving rag rugs.
Temple is always in place when I am weaving a rug. I fitted two different temple parts together to get this warp width. Notice the lengthwise gaps between the temple parts…but not a problem.
Rag rug on the loom. Nearing completion.
Around the breast beam, and over the knee beam, to wrap around the cloth beam. Warping slats are placed between the cloth beam and the rug the first time around to make a smooth surface for the woven rug-cloth.
Rag rug on the loom. Woven hem.
Hem is completed with 12 picks of rug warp. Three inches of scrap fabric header comes next, and then the rug is ready to be cut from the loom.
Hand-hemming rag rug.
Warp ends have been knotted and trimmed; and hem folded under and pressed. Now, hemming with a needle and rug warp, the last step is almost complete. The only thing left is to sew on my label.
Checkered rag rug. Karen Isenhower
Notice the subtle changes in color and depth of color where the warp colors change–purposely not aligned with the block changes.
Home sweet home. That's what rag rugs are for.
Home sweet home. A patterned rag rug makes a house feel like home.

May you finish what you started.

Happy Weaving,
Karen

Linen Is Special

Karen

Linen is special. This is nothing new. Even in biblical history, linen is mentioned as fabric for sacred purposes. But weaving with linen requires attentiveness. The inelasticity of linen means extra care is needed in every stage of dressing the loom and weaving. Of first importance is an even warp tension.

Getting ready to weave with linen. Tying on.
Tying on linen in small 1-inch/2.5 cm increments is one thing that helps contribute to an even warp tension.

This method of tying on* is perfect for weaving rag rugs. The 12/6 cotton rug warp stays snugly in place. Not so with linen. The even warp tension that I have been so careful to maintain can be lost in a moment. The sneaky linen is smooth and slick enough to tie on easily, and then loosen up just as easily. So I take the double precaution of tying an additional overhand knot, AND moistening that knot with a dab of water which helps the linen grip itself. I never have to worry about these knots slipping loose.

Beginning dice weave in linen.
Additional overhand knot, with a dab of water, secures the tie-on threads. I am using sample space to try weft colors and work on getting optimum weft density.

What do you worry about? I have bigger things I worry about, too. But my heavenly Father assures me that He has secured all the knots that concern me. “Don’t worry,” he tells me. “Your Father knows your needs.” Be attentive to keep first things first. Put yourself in the Father’s care, and find that he takes care of you. Special you.

May you forget your worries.

With you,
Karen

* I learned this method of tying on from Becky Ashenden. You can see it fully explained by Becky, with pictures, in Dress Your Loom the Vävstuga Way: A Benchside Photo-guide.

Tools Day: Sley the Reed

Karen

I am dressing the big loom with linen. This flaxen thread brings a worthwhile challenge I find hard to resist. Beaming the warp was slow and deliberate. It pays to be attentive to everything at this stage. Threading for this dice weave could not be simpler; it was finished before I knew it. Now, it is time to sley the reed.

Tools:

  • Reed     I am using a 12-dent reed for this project.
  • Texsolv cord for hanging the reed in front of the shafts
  • Tape measure     I remove the metal ends.
  • Reed hook     Mine is from Vävstuga.
  • Bench, set at comfortable height for threading and sleying     With my Glimåkra Standard, I get to put the bench “in” the loom. It’s like going into my own little playhouse.
  • Good lighting     I use a small Ott Lite Task Lamp when natural light in the room is dim.
Everything is ready for sleying the reed.
Reed is positioned right in front of the threaded heddles. Shafts and reed hang at optimum height for visibility and ease of hand mobility.
Sleying the reed.
Left hand index finger separates the end(s) to be sleyed.
Sleying the reed.
And the right hand holds the reed hook under the reed to pull the end(s) through the dent. (These two pictures show why a third hand would be nice. Normally, I sley the reed with two hands, so a third hand would be useful for taking a picture.)
  1. Form two loops of Texsolv cord that hang down from the top of the loom, one on the right and one on the left, to hold the reed for sleying.     My Texsolv loops hang from the countermarch frame.
  2. Adjust the length of the Texsolv loops so that the reed will fall just below the eyes of the heddles.
  3. Rest the reed horizontally in the Texsolv holders.
  4. Use the tape measure to find the center of the reed.     I mark the center of my reeds permanently by tying a small piece of 12/6 cotton seine twine at the center.
  5. Find your weaving width measurement on the tape measure. Fold that measurement in half and place the folded tape measure at the center point on the reed, to the right, to find the starting dent for sleying the reed. Place one end of the tape measure in that starting-point dent to keep your place.     Some people use the reed hook as a place holder, but when I pick up the reed hook to sley the first dent, I invariably loose my place.
  6. Pull ends through the reed with the reed hook, referring to your draft for the correct number of ends per dent, starting at the dent on the right hand side that has the place holder in it. Good lighting helps to prevent errors.     This is especially true with finer dents and darker threads.
  7. After sleying each group of warp ends, visually examine the sleyed dents to look for missed dents or extra ends in dents.
  8. Tie the sleyed group of ends into a slip knot.
  9. Finish sleying all the ends; and smile, knowing you are a step closer to weaving fabric.

May all your looms be dressed.

Happy Dressing,
Karen

Quiet Friday: Cotton Scarves

Karen

One thing I learned is the scarf with the longest warp floats has the greatest shrinkage rate. Another thing I learned – again – is to plan a longer warp than what I think I need. The third scarf is significantly shorter than the first two because I ran out of warp. Table runner, anyone? I always include length for sampling, but I need to include more, more, more. Still, I am very happy with the finished results. And, you have a new video to watch! (Scroll down to see it.)

Cotton warp for scarves is tied on.
Warp of 8/2 cotton is tied on in 1-inch/2.5 cm sections. The leveling string evens out the warp for immediate weaving.
Cotton lace weave scarf on the loom. Fringe twister video.
First scarf, with dark green weft, has the longest warp floats. This scarf ended up shorter than the second scarf, even though the first scarf’s length on the loom was longer than the second scarf.
Cotton lace weave scarves on the loom. Fringe twisting info, too.
Second scarf, with citrine weft, has a border element created with light green weft (same as the warp), including warp floats. The plain weave before and after the border element helps create a natural ruffle at each end of the finished scarf.
Cotton lace weave scarves on the loom. Springtime colors!
Saving the best for last, I used a series of springtime colors to create this scarf. The varied lengths of the floats give an illusion of colored ribbons crossing the scarf.

I wet finished the scarves in the washing machine, adding a small amount of Eucalan, on the gentle cycle, with warm wash and warm rinse, and very short spin. They went in the dryer on low heat until damp, and then hung to dry the rest of the way. The scarves came out lightly puckered, which is exactly what I had hoped for. I could have washed them in hot water and left them in for a longer amount of time if I had wanted the scarves more dramatically puckered.

Twisting fringe using a fringe twister tool.
Two scarves with fringes twisted. One waiting to be a film star in “Using a Fringe Twister.” This is before wet finishing.
Three cotton lace weave scarves, and fringe twisting video. Karen Isenhower
Wet finishing happens after the fringe has been twisted. These scarves have done it all. They are finished.
My favorite scarf. For now...
First seen on Instagram @celloweaver #warpedforgood

There’s nothing like finishing a fun project! Clearly, I know what to do next… Dress the big loom and keeping on weaving.

May you learn something new every day.

Happy Weaving,
Karen