Tie the Rug Warp Back On

Karen

I’m at fresh starting place. After finishing another double binding rag rug, I have tied the rug warp back on. I’m ready for a new variation in this rag rug series of block designs. Rug warp lets me stop and start. Cut off and tie back on. It’s as simple as that.

Hem at the end of the second rug is woven in plain weave with narrow fabric strips for weft.
Off the loom for a first glance.
Warp ends have been tied in knots and trimmed. Hand hemming fini\shes the rug.
Second rug of the series.
After tying the warp back on, I start the third rug in the series.

May your progress be observable over a span of time.

Happy weaving,
Karen

Mug Rug for Every Good Cup of Coffee

Karen

First thing every morning I pour myself a really good cup of coffee. And before I pour that cup, I select a mug rug to put under my coffee mug. A handmade mug rug makes a good cup of coffee that much better. I like having a mug rug under my cup as I walk, to catch any drips. And then, the mug rug protects the table surface, as well. So, in the early morning, with hot coffee and mug rug in hand, I go sit in my favorite chair to read, think, and pray. And I sip my coffee, thankful for a new day.

Morning Coffee! I keep a selection of handmade mug rugs to choose from. My sister and I had a short phase of basket weaving in the 1980’s. This is a basket I made at that time.

I have made, acquired, and given away too many mug rugs to count. Here are a few favorites that I keep within daily reach.

Mug rugs such as these sometimes come in conference goody bags.
When my grandmother crocheted these decorative potholders many years ago, I’m sure she never imagined that her granddaughter would put them to use as mug rugs.
Blue, brown, and green M’s and O’s. Dark wool butterflies left from tapestry weaving, woven on the Emilia Rigid Heddle loom. Green stringyarn for a rosepath mini rug.
From a recent page in my sketchbook. A portion of this sketch is the basis for my next tapestry cartoon.

May your handiwork show up as embellishments for daily living.

Good morning,
Karen

Process Review: Snowflake Banners

Karen

I reached the end of the drawloom warp on Tuesday evening. Wednesday morning, before Steve and I finished loading up the Casita travel trailer, I cut the warp off the loom. I grabbed a handful of thrums, chained them so they wouldn’t tangle, and threw the bundle into a small bag along with my cowgirl band heddle. And off we went for a short little getaway!

Relaxing under shade trees at the campground, I weave what I need for the four towels’ hanging tabs.

Steve is doing some wood carving. I tied my band warp to his chair. I doubled the 16/2 cotton warp threads in the cowgirl band heddle to make the band wide enough for towel hanging tabs.

Back home, after the towels are wet finished and hemmed, I have an “a-ha!” moment: Only one of these cloths shall be used as a towel. The other three cloths will serve as Christmas Snowflake banners.

There is some irony in the fact that I wove hanging tabs for these three cloths that have since been given an alternate purpose as celebratory Christmas banners.

Christmas Snowflake banners. Revisit the process with me, start to finish:

To see the towels from the first half of this warp, click here: Process Review: House and Home Towels. To see more about the cowgirl band heddle, click here: Cowgirl Band Weaving.

May you have “a-ha!” moments that change how you see things.

Love,
Karen

Snowflakes Made of Thread

Karen

This is the fourth and final towel in my Snowflake series. Right now in Texas hill country it is extremely hot and dry, so these few gentle snowflakes are a welcome sight, even if only made of thread. We look forward to cooler days and moisture from the heavens.

Concluding the lower border of the towel. Warp is 16/2 cotton. Weft is half-bleached 16/1 line linen, except for the wide blue border, which is 16/2 line linen, and narrow 16/1 linen red stripe.

This Myrehed combination drawloom attachment functions as a thread lifter. When I pull a draw handle for a pattern shaft, a series of thread units are raised. When I pull a draw cord for a single unit, one unit of threads is raised. I am using 45 pattern shafts for the repeated snowflake border designs on these towels. The center area of each towel has small and large snowflake designs at varying intervals. These irregular designs are created using 148 single units. It’s because of all those lifted warp ends that we can create woven snowflakes.

Temple in position. Three pulled draw handles lift thread units at the side borders. Several pulled single-unit draw cords (black cords and white cords) lift single units for an off-center large snowflake design.
Lifted warp ends.

We expect to have worries in this life. Daily needs come as repeated patterns. Other disturbances come at irregular intervals. Worry is eliminated in God’s kingdom. God’s kingdom has a worry lifter–Jesus. He invites us to give him our worries and trust him to care for us. Imagine the one-of-a-kind design that emerges when worries are lifted!

May your worries fade away.

In living hope,
Karen,

Tried and True: Sheepskin Loom Bench Cover

Karen

A fluffy sheepskin stays between me and the hard wooden bench at my Glimåkra Standard loom. Softening your loom bench makes weaving that much more pleasant. Last week Jane asked a great question: How do you secure the sheepskin on the bench? To answer that, I invite you to follow along as I secure the sheepskin on my drawloom bench.

Fluffy sheepskin on my Glimåkra Standard bench.
Bench for the drawloom has sheepskin tied on with some twisted cords. Securing this sheepskin is long overdue. Thank you to Jane for prompting this project.

Make a Sheepskin Loom-Bench Cover

Supplies

  • Sheepskin
  • 6 3/8” grommets
  • Pencil
  • Grommet kit (hole punch, base, and flaring tool)
  • Small block of wood
  • Hammer
  • Tape measure
  • Texsolv cord (scissors, and small flame to sear ends)
  • 6 Arrow pegs

1 Mark placement for 6 grommets on the underside of the sheepskin.

2 With block of wood underneath, hold grommet hole punch over one of the marked positions. Tap tool with the hammer to cut a small hole.

3 Insert the protruding ring of the top grommet piece (grommet) into the fur side of the hole.

4 With fur side down on the block of wood, fit bottom grommet piece (washer) on top. Align grommet and washer between the base and flaring tool. Firmly tap with hammer until the two grommet pieces are tightly fastened together.

5 Repeat steps 2 – 4 for each of the 5 remaining grommets.

6 Lay the sheepskin fur-side down on a table or floor. Center the seat of the bench upside down on the sheepskin. Bring the sides of the sheepskin over the bench. Measure the distance between opposing grommets.

7 Double the grommet-to-grommet measurement, and cut three Texsolv cords that length. Sear the cut ends in a flame.

8 Secure the sheepskin to the seat of the bench by lacing one of the cut Texsolv cords through two opposite grommets. Tighten the cord and lock it in place with an arrow peg. Repeat for the remaining two cords.

Sit in immovable comfort.

While we’re at it, let’s fix up one more bench cover…

Scrap of rosepath rag rug is held in place with bungee cords. (Bench for my Glimåkra Ideal loom)
Cord threader pulls Texsolv through. The end knots on the rug should keep the cord from pulling the weft out (I hope).
No more bungee cords!
Sitting in style.

May you see where you can soften things up.

Happy Sitting,
Karen