Be Weave-Able

Karen

I call her the ”Rain Girl.” She comes from an illustration in a very old children’s book on our bookshelf. The small tapestry is cute. But with its many slits and single warp wrappings, it falls short of what it could be. I compromised best practices to make it work.

New small tapestry - Rain Girl.
Small tapestry gets its start on a camping trip. Paint stir stick holds the cartoon in place under the warp.
Weaving a small tapestry from the back.
Weaving from the back. Long car rides are good for portable tapestry weaving.
Cartoon is not going to work for this small tapestry.
Checking the cartoon again.
Small tapestry almost finished. Rain Girl.
Finishing up the weaving of Rain Girl just before pulling back into our driveway after a long trip.

The main fault is with the cartoon. It isn’t weave-able. The image is too small for this sett. There must be a better way to weave this image.

Mounting a small tapestry on foam core board covered with flannel and linen.
Hems are stitched down. 1/2″ foam core board is covered with a layer of cotton flannel, and then natural colored linen.
Mounted small tapestry. Rain Girl.
Rain Girl, first version.

I am starting over with a whole new cartoon! I have now learned that Affinity Designer (computer graphics software) gives me the ability to create vertical parallel lines equivalent to my sett. With those lines in view I can see exactly how each part of the cartoon fits the warp spacing. I am turning the image on its side and enlarging it, and then, cropping to size. This cartoon is going to be weave-able.

Affinity Designer to create a new tapestry cartoon.
Screen shot from Affinity Designer. Image from book illustration is positioned on its side, enlarged, and cropped. View shows vertical lines that match the sett for the tapestry.
Creating a new tapestry cartoon in Affinity Designer.
New Rain Girl cartoon is ready for printing.

All of us have gone our own way. We insistently follow our own cartoon, compromising best practices, while struggling to make it work. There is a better way. Jesus Christ gave himself so that the Grand Weaver’s cartoon could be written on our hearts. In his hands we become his beloved tapestry. Be weave-able.

May your cartoon be just right.

Hopeful,
Karen

Process Review: Glimåkra Siru – First Time Around the Block

Karen

This is the completion of my first warp of three shaft twill on a rigid heddle loom. One step beyond plain weave, this opens the door to further exploration of double-heddle weaving on the rigid heddle loom. I already have two 50 cm (12-dent) heddles in hand for my next project, which will enable me to get an even finer/tighter cloth than with the 40 cm (10-dent) heddles I used for this project.

Guadalupe Mountains National Park and weaving outside.
Glimåkra Siru rigid heddle loom, beside the Weber grill on the picnic table. Weaving outside in Guadalupe Mountains National Park, Texas.
Cottolin warp, and cottolin and linen wefts, make lightweight, but sturdy colorful face cloths. 1/2 weft-faced twill.

The Glimåkra Siru Rigid Heddle loom is the star of this show. Follow along as I take a quick look back through the process of weaving this light fabric. The cotton and linen squares are perfect for face cloths and light wash cloths.

May you be blessed.

Happy Weaving,
Karen

Picture Perfect Handwoven Skirt

Karen

The skirt in my mind is picture perfect in style and fit. If I could snap my fingers and make the skirt appear, I would. Instead, I find my way to a workable sewing pattern by trial and error—agonizing over every small step. The sewing part doesn’t scare me. But I’m in over my head in the garment design arena.

Using Garment Designer to design a layered tiered skirt.
Quarter-scale pattern pieces give me a way to test and try various ways to put the skirt together. I learn a lot of things that don’t work. There is much sewing, ripping, tweaking, calculating and recalculating, etc. And pulling my hair out, figuratively speaking.
Designing a handwoven skirt using Garment Designer software.
Settling on something that works. One more little mockup should answer most remaining questions. I use Garment Designer (patterning and design software) to create the patterns. I can print quarter-scale and full-scale sewing patterns.

A not-as-simple layered tiered skirt replaces my original idea of a simple three-tiered skirt. The new design has a fitted yoke at the top of the skirt (and a zipper) instead of a super-simple elastic gathered waist. All this, so the distinctive borders of each tier will flutter freely, and not be trapped in seams. The trouble is worth it. I can see the finished skirt in my mind’s eye. It is phenomenal! The fabric is handwoven, made for a purpose. This is a skirt worth waiting for.

Testing ideas for a handwoven skirt.
Testing ideas full scale. After several tries, I finally have a good fit on the skirt yoke, which is encouraging.
Handwoven skirt in the making!
Full-size mockup (not shown) satisfies my fit and style requirements. Floral cotton lining fabric will be concealed under the handwoven tiers. Full-scale sewing pattern is printed and ready…

You were skillfully made for a purpose. Through many trials and errors, lessons in success and failure, we discover why we are here. God created you for this very time. Trust him to guide you, especially through agonizing moments. By his grace, he forms us into the phenomenal masterpiece that he has always had in mind.

May you walk with purpose.

Love,
Karen

Tried and True: Weft Rep

Karen

The monksbelt piece that adorns our entry is my favorite from all the projects in The Big Book of Weaving, by Laila Lundell. This current narrower version on the Standard is another heirloom monksbelt piece in the making. The ground cloth is weft rep.

Classic monksbelt in modern colors.
Multi-color ground weave and vibrant Fårö pattern colors make this monksbelt fabric a standout. Glimåkra Standard in the background holds a new version of this favorite piece.

This is snail’s-pace weaving, with 2 picks of 16/2 cotton for the ground weave between every 6/1 Fårö wool pattern pick.

“To weave [weft rep]…the weft must be longer than the width of the warp and so the weft has to arc across the shed. There are two ways to do this: with many small waves across the width or with a large and high arc…The tiniest bit of unevenness can quickly build into hills and valleys across the weft line…”

The Big Book of Weaving, p. 236

Weft Rep in Three Steps

1. Make a Mountain.

After throwing the shuttle, increase the length of the weft by making it into a large arc in the open shed. Put one finger through the warp to form the peak while keeping enough tension on the thread with your other hand to maintain a good selvedge.

Weft rep tutorial
Weaving monksbelt with weft rep. How to.

2. Make Hills and Valleys.

Keeping the shed open, push the mountain down into hills and valleys to evenly distribute the extra weft.

  • Turn the mountain into hills and valleys with your finger.
Monksbelt with weft rep. Tutorial.

OR,

  • Simply drag your spread-out fingers lightly through the weft.
Weft rep how to.
Monksbelt with weft rep. Tutorial.

OR,

  • TIMESAVER – Slowly pull the beater toward you (shed open), smooshing the weft into a wavy line. Stop two or three inches away from the fell line.
Weft rep using the beater to make wavy line.
Simplified weft rep.

3. Flatten the Hills

Treadle for the next shed. On the closed shed beat in the weft. Two short pulses with the beater distribute the weft more effectively than a single squeeze with the beater.

Simplified weft rep.

Watch for little loops that may form in places where there is a bit too much weft. To correct, open the shed, pull that portion of the weft back into a little hill and redo.

OR,

  • TIMESAVER – Draw the back of your fingernail across the warp where you see excess weft. This is often enough to even out little bumps.
Weft Rep - How to, and simplified.

Slower weaving develops into a rhythmic pace that is comfortable. And the cloth grows, line by line.

Monksbelt on the Glimakra Standard.
Rows of monksbelt flowers.

May your slow pace yield thoughtful progress.

Slowly and Surely,
Karen

Warp Stripes and Surprises

Karen

Even through random warp stripes you can see an ordered pattern in the cloth. Linen sitting on the shelf is begging to be used, even though the tubes are partly emptied. So, why not make some linen wash cloths to use every day?

Glimakra Julia Countermarch, 8 shafts.
I wound the warp, not in threading units, but in random sections of color, trying to empty as many partially-used tubes of linen as possible. Eight shafts on the Julia Countermarch loom. 16/2 linen, 10 ends per cm, 32 cm width in the reed.

The weave structure is a classic two-block broken twill, symmetrically threaded across the warp. The asymmetry of the warp stripes is out of sync with the precise threading symmetry in the block weave structure. And, asymmetrical patches of weft are out of step with a strict treadling sequence. The chaos of leftover-linen warp and weft threads has me holding my breath, wondering how this will turn out. Yet, as I weave, the surprise after surprise that appears on the loom fills me with delight. These humble linen wash cloths will yield textile pleasure for years to come.

Humble linen wash cloths on the loom.
Red and white threads alternate in one of the warp stripes.
Glimakra Julia with 8 shafts.
Weft threads include 16/2 linen, 16/1 linen, doubled 16/1 linen, and 6/1 tow linen.
Explosion of color!
This is a fine way to use up quills from previous projects that still have a little linen on them, as well as using up the very tail end of a few tubes of linen.

The Grand Weaver breaks through chaos to reveal his beautiful plan. Despite the hardships we endure in this world, the structure threaded into the Grand Weaver’s fabric holds it all together. He brings our random stripes of emptiness into harmony with his project plan. We find continual delight as we see the surprising glory of his master plan. Jesus, with his deliberate stripes, comes to wash us clean.

May you find beauty wherever you look.

Happily Weaving,
Karen