If a Warp End Is Frayed…

I noticed that a warp end was starting to fray, but I kept on weaving. I thought I could make it past the weak spot. Well, I was wrong. The warp end broke. So much for happy weaving! A broken warp end at the selvedge is no fun, especially on a weft-faced piece like this. Looking back, I wish I had taken time to splice in a new length of thread when I first noticed the weakness. But at the time, I didn’t want to be bothered with that. I just wanted to weave.

Tapestry / inlay sampler on small countermarch loom.
Weaving right along. I start to notice some abrasion on the warp end at the right selvedge. I’ll be extra careful. I can keep weaving and enjoy myself, right???
Broken selvedge end on the right. Ugh.
Warp end on the right selvedge frayed to the breaking point. Gone! The weaving must be removed far enough back to reach at least 1/2″ of the warp end in front of the break. That reaches back into the red portion–the first section of the sampler.
Tapestry / inlay sampler on small countermarch loom.
Pin is inserted to secure a new selvedge warp end. The fourth end from the right showed some fraying, so I am splicing in a new piece of 12/9 cotton warp. Learned my lesson.
Original selvedge warp end is now being spliced back in (green flathead pin). Second splice is complete, with thread tail hanging out, to be trimmed after this is off the loom.
Tapestry and inlay sampler. Spliced warp ends fix frayed threads.
Two sections of the tapestry and inlay sampler are complete.

We tell ourselves if we do what we want, we will be happy. That’s a delusion. Happiness will fail you. It doesn’t last. I was only happy weaving until the thread broke. There is something better than happiness. Faithfulness. It’s better to be faithful in the moment, even if it puts a delay on being happy. Faithfulness lasts. Next time, I hope to choose the long satisfaction of faithfulness over the short-lived gain of happiness.

May your broken selvedge ends be few.

Faithful weaving,
Karen

Finer Weft for a Stronger Cord

I need a strong cord for a specific use. It needs to look nice, without drawing attention to itself. This cord will connect three small pieces of wood. I will reveal how they will be used after I finish weaving the cord.

Three wooden pieces for a special purpose...
Three wooden pieces to be connected for a purpose. What are they for? You are welcome to put your guess in the comments…
Warping the Glimakra band loom.
Warping the band loom.

I chose 12/6 rug warp for the project, to make this a durable cord. With a band this narrow, the 12/6 cotton is too bulky for weft. I could not pull the selvedges tight. I need a finer weft that will draw the warp ends together and disappear at the selvedges. Black 16/1 linen works beautifully!

New woven narrow band. Need to change the weft.
Using 12/6 cotton rug warp for the weft proved to be unworkable for this narrow band. Light shows through the gaps at the selvedges.
Linen weft for this narrow band.
Black linen weft matches the black selvedge threads. The 16/1 linen enables tight and even selvedges for this 5/16″ (8 mm) band.

A change of heart changes everything. The condition of our heart is revealed in the way we behave toward others. Our thoughts and actions are a matter of the heart. To live in a manner that is unselfish, generous, kind, and content, we must do more than line up the right outward appearances. We must start with humility. Having the perfect warp means nothing if the weft interferes with a beautiful outcome. Humility, like the linen weft, is a posture of the heart that pulls everything else together.

May your heart be beautiful.

Warmly,
Karen

Tips for Taming String Yarn Weft Tails

Those pesky string yarn weft tails! There is a lot of starting and stopping with these mug rugs. Normally, tucking a weft tail back into the shed adds a bit of extra thickness at the selvedge. So, what about this very thick weft? It has the potential to throw everything off balance. A few easy tips help minimize the distortion the thicker weft can cause.

Taming String Yarn Weft Tails

  • Begin the thick weft on alternating sides. This will prevent one selvedge from building up more than the other.
  • Taper the end of the string yarn, cutting it at a steep angle.
  • Starting about 1 3/4″ inside the selvedge, send the shuttle through the shed toward the selvedge, going over or under the outermost warp end. Pull through until almost all of the weft tail is caught.
What to do with string yarn weft tails.
Starting the shuttle from the inside, going outward, is an easy way to catch all the separate threads of the string yarn.

Taming string yarn weft tails.

  • In same shed, send the shuttle back through to the other side, aware of encircling the one warp end.

Tucking in string yarn weft tails. Tips.

  • Beat. (Beat on open shed. Beat again. Change sheds. Beat again.)

How to manage string yarn weft tails.

  • Continue weaving.

Rep weave mug rugs. String yarn weft tails - tips!

  • To end the thick weft, leave a 1 3/4″ tail, and taper the end of the string yarn, as before. Lay the tail back in the last shed, going around the outermost warp end. Beat.

Things happen that throw us off balance. From personal celebrations to unexpected losses. Don’t be afraid. Putting trust in the Lord minimizes the inner turmoil. The Lord is my light. He lights my way. What is there to be afraid of? Wholehearted trust in the Lord pushes fearfulness away.

May you walk in a lighted path.

Happy weaving,
Karen

Quality Rug Warp

After a few weeks of having to refrain from weaving, I am thankful that there was warp to weave one more rug. The quality of warp thread matters because it is the core of the rug. Never underestimate the value of good, strong warp thread for weaving rag rugs.

Rosepath rag rug almost complete!
First hem is going around the cloth beam. Weaving is almost complete!

I like to use 12/6 cotton from Bockens. This rug warp is a six-strand thread with high twist. The smooth, nearly-unbreakable thread enables me to ratchet up the tension on the warp. That high tension helps produce sturdy, tightly packed rugs with tidy selvedges. Knowing you are making a rug that will last is a very satisfying and enjoyable weaving experience.

Cutting off never gets old!
Cutting off never gets old.
Rosepath rag rug just finished. Karen Isenhower
Ta da! Hems are folded under for the picture. As soon as the hems are stitched, this rosepath rag rug will have its Etsy photoshoot.

With finishing nearly complete, this rag rug will be enjoyed on the floor of someone’s home. Most people aren’t aware of the structural elements of a rag rug, but they do notice quality in the finished work. People, too, have an inner core–the heart. The heart matters. The strength of our inward framework determines our outward attitudes and actions. Since true quality is found in a life that serves others, most everything comes down to a matter of the heart.

May your quality of life be noticeable.

Happy weaving,
Karen

More Rosepath Rag Rug Ideas

This is my favorite rosepath rag rug of all time! (Have I said that before?) I like the unexpected color changes that occur in the design. While the main rosepath pattern is woven in a yellow batik, the background tabby changes from pink to a mixed print, and then a single brown stripe outlining solid blue.

Classic rosepath motif in a rag rug on the loom.
Single row of dark brown tabby serves to outline the central rosepath motif.

The other thing I like about this design is the repeated uneven plain weave weft stripes–three rows green and two rows black. The ideas for color changes and uneven stripes came from looking at rugs in my Swedish weaving books. I have another rug to weave on this warp before we get to see this “favorite” spread out on the floor.

Weaving a rosepath rag rug. So many design possibilities!
Every weft, including the rosepath pattern weft, goes around the selvedge warp ends. The inactive yellow batik fabric strip is carried up the selvedge through the active wefts.

Designs start with ideas. Who designed the intricate workings of the human body, or had the idea of putting planets together in a solar system? The universe is amazing, with every explicit detail honoring the Creator. Designed to operate on the faithful love of the Lord, this universe is a divine idea brought to life. With the glimpses we see of his perfect design, we can’t help but give our Grand Weaver the admiration he deserves.

May you have plenty of favorites to weave.

Happy weaving,
Karen