Tools Day: Loom Bench Baskets

Some accessories are so useful they simply become an extension of the loom. That’s how my loom bench baskets are for me. I automatically place an emptied shuttle there without a second thought. It’s where extra shuttles go that are waiting their turn, or extra quills that have been wound, or a few fabric strips that are set aside for one section. For anything I need to drop or pick up–the baskets are always there.

Loom bench basket holds the ski shuttles for a rosepath rag rug.
Deep basket on the bench at the baby loom (Glimakra Ideal) easily holds my ski shuttles for this rosepath rag rug.
Loom bench basket holds the 5 ski shuttles for this rosepath rag rug.
Leather strap on the basket slips over the end post of my loom bench, right by the always-handy measuring tape.
Deep basket, perfect for holding shuttles.
Basket made for this purpose, from Vavstuga.
Loom bench basket with Ikea container inserted to hold quills.
Basket at the big loom (Glimakra Standard) holds a small hanging cup I found at Ikea that is useful for holding small things, like filled and emptied quills.
Loom basket is tied to the bench with an old inkle-woven band.
Old basket I’ve had for years is put to use on the other side of the big loom bench. I tied it on with a wool inkle band I wove many years ago.

May you have what you need at your fingertips.

Happy weaving,
Karen

Tools Day: Narrow Shelf

It’s not easy to keep a table top cleared off. Little things accumulate that intrude on the work space. The wonderful maple work table Steve made for my weaving room a couple years ago provides a needed surface for multiple uses. I do my project planning here; and I weigh out my yarns here; and I wind quills here. It’s time to create a space for the little things, to get them off the table. Steve to the rescue! He built a narrow shelf to go on the wall behind the work table. Pencils, snips, pins and needles, quills with a little bit of thread, and the like. Pegs below the shelf give me a convenient place to hang a few essentials–small scissors, Gingher thread clippers on a cord, a few choke ties, tape measure, and my Väv Calendar.

Hand-crafted maple shelf compliments the maple work table below.
Hand-crafted maple shelf compliments the maple work table below. Frequently used items are within arm’s reach.
Hand-crafted maple shelf above weaving work table.
Re-purposed vessels make colorful holders for small items.

Now, I am ready for anything!

May your creative space work in your favor.

All the best,
Karen

Tools Day: Loom Lighting

Let there be light! I now have exceptional lighting at my weaving looms. Steve installed a snake arm lamp on both of my Glimåkra looms. This wonderful illumination gives me greatly improved visibility, especially when working with fine threads. These lamps meet my lighting needs much better than the floor lamps I had been using. Good riddance, floor lamps!

Supplies

  • Snake arm shop light with clamp (mine are Rockler 24″ Snake Arm Shop Lights)
  • Light bulb, preferably close to natural light
  • Wood block, sized to fit on loom (mine is installed on the countermarch frame; 8 1/2″ x 2 3/4″ x 3/4″ for the Glimåkra Standard 8-shaft loom; 6 1/2″ x 2 3/4″ x 3/4″ for the Glimåkra Ideal 6-shaft loom)
  • Electric drill and pilot bit
  • 2 drywall screws
  • Short three-prong extension cord

Steps

  • Prepare wood block by drilling screw holes (screw threads slip through the holes without biting)
  • Position prepared wood block on loom, mark loom for screw placement
  • Drill pilot holes
  • Screw wood block in place
Mounting on Glimakra Ideal loom for a loom lamp.
Block of wood is screwed into place on the Glimåkra Ideal loom countermarch frame for mounting the loom lamp.

 

  • Position lamp and clamp into place
Mounting a loom lamp on the Glimakra Standard loom.
Lamp is positioned on the mounting that is attached to the Glimåkra Standard countermarch frame.
Snake arm loom light gives flexibility in directing light where it's needed.
Snake arm gives flexibility for directing the light onto the weaving surface, or over the area of work; e.g., threading, sleying the reed, etc.
Loom lamp is clamped onto a mounting on the countermarch frame.
Lamp is clamped onto the mounting. Project notes hang for easy referral while weaving. The back of the sheet shows yarn snippets used in the project.

 

  • Plug lamp cord into extension cord; plug extension cord into outlet
Loom light shines on monksbelt weaving.
Simple on/off switch controls the lamp. Monksbelt picks are easier to count with the new loom light turned on.

 

  • Illuminate!
Monksbelt on the Glimakra Standard loom. Well lit.
Lamp cord runs along the frame of the loom and down to the floor, where an extension cord continues to a wall outlet.

 

May the work of your hands be illuminated.

Wishing you the best,
Karen

Tools Day: Loom Cart

Having a cart beside my loom is the next best thing to a loom-side assistant! A turquoise utility cart from IKEA sits beside my Glimåkra Ideal. An Elfa drawer system on casters is right beside the Glimåkra Standard, and keeps oft-used tools within arm’s reach.

The IKEA cart (Råskog Utility Cart) serves as a holding space for any project on the Ideal. Since this loom is not in the room where I keep my weaving supplies, it helps to have a rolling cart that holds items as needed. The three tiers hold tools and supplies for dressing the loom, like sley hook, extra Texsolv heddles, and treadle cords. While weaving, I keep extra shuttles and small tools on the top tier. All the weft thread or yarn for the project goes on the second or third tier. When I weave rag rugs, fabric strips that are sorted by design and/or color are piled up on the three tiers.

IKEA utility cart as loom-side assistant.
IKEA utility cart holds thread and wound quills while I try out weft colors on a new warp.

The Elfa cart enhances efficiency at the big loom. It houses frequently-used essentials, especially small tools and supplies needed to dress the loom. It is near my work table where I wind quills, so yarn for the current project goes in the deep bottom drawer. The woodblock top adds a nice touch that compliments the wood of my Swedish loom.

Elfa drawer system with casters for loom-side assistant.
Too many leftover quills from projects sit in the top drawer of the loom cart. Sley hooks, flat head pins, headlamp, pencils, tape, and other small tools and gadgets are in this top drawer.
Elfa drawer system as loom cart. Organized!
Second drawer has anchor pins and arrow pegs for Texsolv cord, box of choke ties, box of long treadle cords, box of short treadle cords. I found the little boxes at IKEA.
Loom room organization. Guide strings wrapped on empty tubes.
Guide strings for measuring warp are wrapped on empty thread tubes. This drawer also holds rolls of twill ribbon used for measuring weaving length at the loom.
Organization at the loom. Elfa cart solution.
Yarn in the bottom drawer is only a half step away from the winding station. All the cotton and wool weft for the current project is in this drawer, making it easy to grab what I need for winding more quills.

May your loom-side assistant serve you well.

Happy Weaving,
Karen

Tools Day: Let There Be Light!

Sunshine coming through the windows is marvelous for weaving. But my eyes need extra light to see small details. This is noticeably true with errors that I mend on the loom and off the loom. I turn on extra lighting at other times, too–when threading fine threads, sleying the reed with fine or dark threads, counting picks per inch on woven cloth, and checking the treadling pattern in a fine weave, for example. And sometimes I turn on extra lighting for no other reason than it’s a cloudy day.

Tools:
OttLite Task Lamp with Swivel Base
Handheld lighted magnifier

Broken weft repair.
Pin marks the spot where I broke a thin weft thread, 30/2 cotton, with the temple.
Repairing broken thread requires task lighting.
Repair area is flooded with light from my portable OttLite.
Replacing broken weft thread.
Illuminated stitches are easily seen. A replacement length of weft is needle-woven in.
Oops. A few skips to fix in handwoven cloth.
Series of errant floats are discovered after this fabric is removed from the loom. At 30 ends per inch, my eyes strain to see where to weave the needle.
Lighting and magnification needed for fixing threads.
Needing more than the bright OttLite, I add magnification. Pairing the OttLite with the handheld lighted magnifier does the trick!
Magnified threads for handwoven repairs.
Lighted magnifier, reflecting the OttLite just overhead, balances perfectly on a small sewing basket. Now I can actually see the threads I am fixing.

To further reduce eye strain, I am considering other lighting options. Have you had success with task lighting? I’d love to hear about it. Share your experience and recommendations in the comments.

My Lighting Wish List:
Full spectrum floor lamp
Adjustable-arm magnifying task light to clamp on table or loom

May you see what you need to see.

With a bright outlook,
Karen