New yarn arrived this week! Seeing the skeins of colors makes me excited about starting the next project. I am preparing to weave another transparency. This time, the hanging will have a pictorial design. But there are several things to tend to before the weaving begins. First, I will wind the skeins into balls, and wind the linen warp. And then, I will finalize the cartoon. Stay tuned…
Meanwhile, this week I am at the Contemporary Handweavers of Texas Biennial Conference, learning new things and making connections with handweavers across the state.
The color is rich, the drape is fluid, and the pattern in the lustrous cloth is eye-catching. “Kuvikas to taqueté” was not an easy project. Eight shafts, double treadling, and double-bobbin shuttles with slick 8/2 Tencel weft. But the fabric is incredible!
Thanks to a unusual tie-up, two treadles are pressed simultaneously, something I had not thought possible for a countermarch loom. I started with kuvikas (summer and winter), which has tabbypicks between the pattern picks. The dark teal 8/2 cotton tabby weft and the bright teal Tencel pattern weft produce a tone-on-tone effect for the square and stripe patterns. These two pieces will become the front and back of a throw pillow.
I then changed the treadle tie-up to switch from kuvikas to taqueté. The taqueté has no tabby weft. The teal and cream Tencel weft threads lay back-to-back, producing a double-faced fabric. This piece is being used as a table runner.
Enjoy the little slideshow video I made for you that follows the process from three lovely aquamarine warp chains to fabric glistening in the sun on a Texas hill country table.
May you finish something that is not easy.
Happy Weaving, Karen
Do you remember my Handwoven Thick and Thin Towels (that appeared on the cover of Handwoven), and my Black and White Towels (These Sensational Towels)? I will be teaching a workshop on that thick and thin technique at Shoppes at Fleece ‘N Flax in beautiful Eureka Springs, Arkansas August 24 – 26, 2017. You’re welcome to join us! I’d love to see you there! Contact the shop at the number below if you are interested.
Eventually, I would like to have a metric reed (or two) in every possible size. Until then, I will be happy with what I have, while I gradually add to my supply, as needed, one reed at a time.
I prefer metric reeds (dents per 10 centimeters) over imperial reeds (dents per inch). For one thing, the math is easier for project planning. And because there are smaller increments between sizes, there are more sett choices with metric reeds. It could be my imagination, but it often seems that the metric reed yields a Goldilocks “just right” sett.
My selection of reeds vary in length, from 70 cm (27″) to 120 cm (47″), to fit the weaving widths of my looms. But Glimåkra countermarch looms have beaters that are open on the sides, so I can use any length reed in any loom.
My all-around favorite reeds are those made by Glimåkra because they are lightweight and easy to handle, …and they come in metric sizes. (Of course, you need to choose reeds that work with your loom.)
I put together a reed conversion chart so that we can see our options at a glance. You never know when a new project will “require” a new metric reed!
May your next project have a Goldilocks “just right” sett.
It will be worth it. 896 threads through these heddles, and then two ends per dent in the reed. This is the necessary dressing of the loom. I do it nine minutes, thirty-five minutes, and twenty-two minutes at a time. I do not accomplish it in one sitting. After accumulating almost five hours of threading, I’m ready to sley the reed.
It is easy to lose concentration when there are so many ends. The M’s and O’s threading has just enough variation in it to make me wonder if I did keep it all in the correct sequence. We will find out. The threading, correct or not, is always revealed as the fabric is woven.
What is faith? Faith is putting your trust in something you have good reason to think is true. Stand firm, immovable, in your trust in the Lord. You put threads in the heddles because you have good reason to think these threads will become fabric. Don’t quit. Keep coming back to it. Be strong in faith. And do it from a framework of love. Your framework is always revealed in the cloth of your life.
I have started this tapestry sampler three times. The biggest problem was the header. I had so much draw-in that warpends were breaking at the selvedges. Cut off and tie back on. I knew what to do–bubble the weft. But again, the second time, I had too much draw-in. Maybe I can ease the width back out to where it should be… Nope. After several hours of weaving with beautiful linen butterflies, and breaking more warp ends, I gave up.
I carefully removed all of the linen weft, and took out all of the header. Start over. Again. I did what I should have done from the start. Bubble the weft MORE. It works! Now I have a great starting place for the tapestry weaving to flourish. Until I had a good header, I was wasting my time trying to make the tapestry work.
Words are like a header for our view of the world. Words shape our thinking. Listen carefully to test words, like you test food on your plate by tasting it before eating the whole thing. Test the words you hear. And only swallow what is right and good. If the header is good, your tapestry can flourish.