Tag: wood

Tools Day: Loom Lighting

Karen

Let there be light! I now have exceptional lighting at my weaving looms. Steve installed a snake arm lamp on both of my Glimåkra looms. This wonderful illumination gives me greatly improved visibility, especially when working with fine threads. These lamps meet my lighting needs much better than the floor lamps I had been using. Good riddance, floor lamps!

Supplies

  • Snake arm shop light with clamp (mine are Rockler 24″ Snake Arm Shop Lights)
  • Light bulb, preferably close to natural light
  • Wood block, sized to fit on loom (mine is installed on the countermarch frame; 8 1/2″ x 2 3/4″ x 3/4″ for the Glimåkra Standard 8-shaft loom; 6 1/2″ x 2 3/4″ x 3/4″ for the Glimåkra Ideal 6-shaft loom)
  • Electric drill and pilot bit
  • 2 drywall screws
  • Short three-prong extension cord

Steps

  • Prepare wood block by drilling screw holes (screw threads slip through the holes without biting)
  • Position prepared wood block on loom, mark loom for screw placement
  • Drill pilot holes
  • Screw wood block in place
Mounting on Glimakra Ideal loom for a loom lamp.
Block of wood is screwed into place on the Glimåkra Ideal loom countermarch frame for mounting the loom lamp.

 

  • Position lamp and clamp into place
Mounting a loom lamp on the Glimakra Standard loom.
Lamp is positioned on the mounting that is attached to the Glimåkra Standard countermarch frame.
Snake arm loom light gives flexibility in directing light where it's needed.
Snake arm gives flexibility for directing the light onto the weaving surface, or over the area of work; e.g., threading, sleying the reed, etc.
Loom lamp is clamped onto a mounting on the countermarch frame.
Lamp is clamped onto the mounting. Project notes hang for easy referral while weaving. The back of the sheet shows yarn snippets used in the project.

 

  • Plug lamp cord into extension cord; plug extension cord into outlet
Loom light shines on monksbelt weaving.
Simple on/off switch controls the lamp. Monksbelt picks are easier to count with the new loom light turned on.

 

  • Illuminate!
Monksbelt on the Glimakra Standard loom. Well lit.
Lamp cord runs along the frame of the loom and down to the floor, where an extension cord continues to a wall outlet.

 

May the work of your hands be illuminated.

Wishing you the best,
Karen

Skinny Inkle Band

Karen

This is the narrowest inkle band I have ever made! With thirteen ends of fine 16/2 cotton, I get a very skinny ribbon. I brought my inkle loom with me to the Texas Woodcarvers Guild Spring Round-Up. This gives me something to do at the “Conversation Table” while Steve attends wood carving classes. Some ladies have their crochet, some have their knitting, and I have my inkle.

Skinny inkle band.
Inkle shuttle holds fine 16/2 cotton weft.
Farm scene relief carving.
Steve making progress with his farm scene relief carving.

The inkle loom is a conversation piece, to be sure. Inquiring people stop to look and ask questions. Many think it looks complicated. “It’s a lot simpler than carving a piece of wood,” I say with a smile.

Skinny inkle band, woven with 16/2 cotton.
Warp is close to the maximum length possible for this inkle loom. Off the loom, the band measures about 2 1/2 yards (2.25 meters).
Dime shows scale of narrow inkle band.
Finished skinny inkle band, with a dime for scale.

Seek the Lord; seek His strength. Walk in the Lord’s strength. When this is your habit, your continual mindset, life’s struggles seem less complicated. Down shed – shuttle – up shed – shuttle. Repeat. Keep going to the end. 

May you have the strength you need. 

Truly Yours,
Karen

Tools Day: Teeny Tiny Temple

Karen

What if you start weaving a project and realize your smallest temple is too big? And that your smallest temple is the smallest one they make. I am aware that most people do not use a temple for something this narrow, 16.7 cm/6.5 in. width in the reed, but this is a rag rug. A miniature rosepath rag rug. And draw-in is inevitable, which leads to weaving headaches like broken selvedge warp ends. A temple helps prevent all that.

Smallest temple is too big. How I solved this dilemma.
Smallest Glimåkra temple is two inches wider than my weaving width.

I have seen makeshift temples that I could try, but my genius husband has a better idea. Why not cut down my little temple to the size I need? So he takes the tiny temple out to his workshop in the garage and turns it into a teeny tiny temple! (He does this knowing full well that I will need to replace the temple being cut.)

Cutting a temple down to make a teeny tiny temple.
Measure twice; cut once. Steve marks his cutting lines on the original temple parts.
Small temple is cut down to teeny tiny size.
Happy with the first cut, Steve is now ready to let the second piece meet the saw blade.
Small temple is cut down to teeny tiny size. It works!
Once cut apart, we wonder if a temple this tiny will work? Will there be enough length for the pieces to pivot as needed? There’s one way to find out…

Perfect! It works! And holes for the locking pin line up, too!

Teeny tiny temple in place on miniature rag rug. (6 1/2")
Teeny tiny temple does its job. Yay!
Start of a mini rosepath rag rug. Karen Isenhower
Start of a miniature rosepath rag rug.

Mini rosepath rag rug in the making.

May you cut your problems down to size.

A little weaving,
Karen

Weave the Portable Way

Karen

What do you do when you are away from your looms for a week? Portable weaving, of course. I thought about bringing my band loom, but fitting the band loom in the car turned out to be more of a hassle than it is worth. So the band loom stayed home.

Glimakra band loom with cottolin warp.
Band loom stays home.

I have my inkle loom with me instead, as well as my small tapestry frame. Steve is taking a woodcarving class from Dylan Goodson this week at the Texas Woodcarvers Guild Seminar; and while he is in class I am keeping my hands busy with portable weaving.

Woodcarving class by Dylan Goodson.
Steve beginning to shape his relief carving, following the finished example by his instructor, Dylan Goodson.
Linen inkle band.
First inkle band of the week is linen.
Cottolin inkle band warp.
Cottolin warp for the second narrow inkle band.
Cottolin inkle band.
Second inkle band almost finished.
Small tapestry on portable frame loom.
Start of a small tapestry of a little girl, derived from a picture in a children’s book.
Cottolin inkle band. Karen Isenhower
Time to put on one more inkle warp!
Woodcarver doing relief carving.
Adding more details to the relief carving. Good carving takes time and patience. Like weaving.

May you enjoy passing the time away.

Happy portable weaving,
Karen

Tools Day: Hand-Carved Stamps

Karen

I need only a few simple shapes to stamp the warp. Fortunately, my woodcarver husband agreed to make the wooden stamps for me. Steve asked me to draw the shapes on white paper, and said he would take care of the rest. The result? Superb wooden stamps for making painted designs on the warp while it is on the loom.

Carving wooden stamps for warp stamping.

Carving wooden stamps for warp stamping.

Supplies for stamping the warp on the loom.

Stamped warp.

May you be the recipient of hand-crafted love.

Simply,
Karen