Handweaver and 'cellist, married to Prince Charming, mother of three superheros and three superhero-in-loves, and Lola to nine little princes and princesses. Life is a handwoven treasure, filled with hidden melodies.
Twenty-seven coffee mugs sitting in a row… on these new mug rugs! Wouldn’t that be a lovely sight?! Twenty-four of the mug rugs are identical. The last three, however, are different. I ran out of string yarn near the end of the warp, so I switched to fabric strips for the weft. There is just enough spacing between warp ends that some of the fabric print shows through. I love the results! These last three mug rugs are set apart. Brought about by a shortage of string yarn.
Realizing our personal shortages is the beginning of humility. It’s not easy to acknowledge shortcomings. But humility begins with honesty. And it’s the answer for those who want to find the path to God. It’s our honesty about our shortcomings that catches His attention. God hears a humble prayer. The God of the universe gives one-on-one attention to the person who comes to Him in humility. Amazing! We come to the end of our personal supply, and He supplies the needed weft that sets us apart.
May your humility make you different from the norm.
With you, Karen
~ATTENTION~ Towel Kits ~
Thank you for your fantastic response regarding the towel kits I am offering! Many of you have expressed an interest in knowing when the kits will be available for purchase.
A small number of towel kits are ready! The River Stripe Towel Set, Pre-Wound Warp and Instructional Kit, for $150 per kit,will be listed in the Warped for Good Etsy Shop tomorrow, Wednesday, March 29, 2017, around 10:00 am CT.
If you are not already on the Towel Kit notification list, and would like to be notified when the next batch of towel kits are ready, please send me a message HERE.
My introduction to rosepath rag rugs was on a room-size loom in Joanne Hall’s magical Montana studio. I was so happy at that moment that I actually cried. It’s no surprise, then, that I relish every opportunity to weave a rosepath rag rug. And even better, to share the joy with other handweavers who may not have tried it yet. Look what came in the mail this week! The March/April 2017 issue of Handwoven, with a project by yours truly–Swedish Rosepath Rag Rug!
Not everyone loves weaving rag rugs. That’s fine. But if you’re a weaver, there is probably something that draws your interest and brings delight. A certain weave structure, silky fibers, fine threads, complex patterns, bold colors. Something. And if you’re not a weaver, there is something else that triggers your pursued interest. Find that spark that ignites joy in you!
Keep a song in your heart. Sing. Sing for joy. Sing praise to the Grand Weaver who put the seed of searching in you. A seed that bursts open with joy when ignited with a spark, and flourishes into something distinguishable. Trust the Lord with all your heart. Your heart will find its melody.
May your heart sing a joyful tune.
ATTENTION: The draft for the Swedish Rosepath Rag Rug from Handwoven is written for a sinking shed loom. Therefore, for a jack loom, you must tie up the “white” empty squares instead of the numbered squares for the pattern to show right side up as you weave.
If you are interested in weaving rag rugs, take a look at Rag Rug Tips, a new tab at the top of the page.
Those pesky string yarn weft tails! There is a lot of starting and stopping with these mug rugs. Normally, tucking a weft tail back into the shed adds a bit of extra thickness at the selvedge. So, what about this very thick weft? It has the potential to throw everything off balance. A few easy tips help minimize the distortion the thicker weft can cause.
Taming String Yarn Weft Tails
Begin the thick weft on alternating sides. This will prevent one selvedge from building up more than the other.
Taper the end of the string yarn, cutting it at a steep angle.
Starting about 1 3/4″ inside the selvedge, send the shuttle through the shed toward the selvedge, going over or under the outermost warpend. Pull through until almost all of the weft tail is caught.
In same shed, send the shuttle back through to the other side, aware of encircling the one warp end.
Beat. (Beat on open shed. Beat again. Change sheds. Beat again.)
Continue weaving.
To end the thick weft, leave a 1 3/4″ tail, and taper the end of the string yarn, as before. Lay the tail back in the last shed, going around the outermost warp end. Beat.
Things happen that throw us off balance. From personal celebrations to unexpected losses. Don’t be afraid. Putting trust in the Lord minimizes the inner turmoil. The Lord is my light. He lights my way. What is there to be afraid of? Wholehearted trust in the Lord pushes fearfulness away.
An idea is merely a collection of thoughts until it begins to take shape. Plans, thinking things through, trial and error, sampling, writing, formatting. That’s what it has been for this Plattväv towel kit. The idea to develop a towel kit is taking shape. Finally. River Stripe Towel Set, a Pre-Wound Warp Instructional Kit! I am winding the warps now. I have written the instructions. There are still a few loose ends (obviously a weaver’s term) to take care of, but we’re closer to turning this idea into a real thing. Made especially for adventurous weavers.
If these kits can inspire a few people to weave their own exceptional adventure, I will call this idea a success!
(If you would like to be notified when the kits are ready, no obligation, please send me an email or let me know in the comments below.)
Cooks have recipes, builders have blueprints, and handweavers have weaving drafts. There are a few different formats, but all drafts carry the same essential information. There is the tie-up box, the threading pattern, and the treadling sequence. Finally, there’s the drawdown, a graphic representation of how all the threads intersect.
The two formats I see most often are the typical American draft (e.g., Handwoven), and the Swedish draft (e.g., VÄV Magasinet). Many American drafts assume jack looms; whereas, Swedish drafts usually assume counterbalance or countermarch looms. However, any loom can weave from any draft.
As Madelyn van der Hoogt says in The Complete Book of Drafting, “Any tie-up can be used for any type of loom. Discover from the tie-up which shafts must be up and which down for each shed, and do to the loom whatever is required to get them there.”
All the draft formats have this in common: The tie-up box is the starting point. The threading pattern and treadling sequence begin at that point, and go out from there.
The Swedish draft makes perfect sense (remember, of course, I weave on Swedish countermarch looms). I picture the draft as if it is lying flat in front of me.
Becky Ashenden says in the forward to Weave Structures the Swedish Way, “With this orientation of tie-up, treadling, and threading, the draft has a direct relationship to the weaving of the fabric. The tie-up’s location in the lower right-hand corner of the draft allows all other information to match as closely as possible the physical aspects of the loom.”
Here is a comparison of the Swedish and American draft formats:
Swedish Draft
Weft drawdown (filled-in squares show loweredwarp threads, weft passing over)
Tie-up is in lower right corner, and uses black squares to designate shafts that sink / white squares for shafts that rise
Threading is below the drawdown
Shafts are numbered from back of the loom to front, with the first shaft the furthest from the weaver seated at the loom
Treadling sequence is on the right, and reads from bottom to top
Treadles are numbered from right to left
For a “sinking shed” loom (countermarch or counterbalance loom), use the black squares to tie up sinking shafts
For a “rising shed loom” (jack loom), use the white squares to tie up rising shafts
Tie-up is in upper right corner, and uses numerals to designate shafts that rise / white squares for shafts that sink
Threading is above the drawdown
Shafts are numbered from front of loom to the back, with the first shaft the closest to the weaver seated at the loom
Treadling sequence is on the right, and reads from top to bottom
Treadles are numbered from left to right
For a “sinking shed” loom (countermarch or counterbalance loom), use the white squares to tie up sinking shafts
For a “rising shed loom” (jack loom), use the squares with numerals to tie up rising shafts
Similarities between Swedish and American Drafts
Threading reads right to left
Squares in the tie-up box represent treadle cords that attach treadles to corresponding shafts
Resources
Getzmann, Ulla, and Becky Ashenden. Weave Structures the Swedish Way. Shelburne, MA: Väv Stuga Press, 2006.
Hoogt, Madelyn Van der. The Complete Book of Drafting for Handweavers. Coupeville, WA: Shuttle-Craft Books, 1993.