Tag: warp

Sweet Little Loom with a View!

Karen

Steve thought I should have another loom, so he used his carpentry skills to build a 27-inch Swedish-style four-shaft countermarch loom! It’s beautiful. It’s incredible! In preparation for retirement in a few years, we found a place in beautiful Texas hill country to call (our future) home. For now, it’s a place to gather with children and grandchildren on occasional weekends. And a place to put a sweet little loom.

Making weaving loom parts.
Making weaving loom parts.
Making weaving loom parts. Treadles.
Six treadles ready.
Putting the new little handbuilt loom together!
Final Touch. Tightening the cradles for the top of the hanging beater.
Maiden warp for a new sweet little loom.
Putting on the maiden warp of 12/9 cotton seine twine.
Ready to take the loom apart to move it.
Loom is ready to be disassembled. Warp is wrapped up on the warp beam. Blue duffel bags will hold all the loom parts except for the side frames and the beater, to be transported to the new location.

And it only gets better. We situated the petite loom by the corner windows in the living room. At the loom, I have the best seat in the house, with an amazing view of God’s creation. The loom tells me my husband knows me very well. And the view tells me the Lord knows me, too.

Loom with a view! Texas hill country.
Threading heddles while enjoying the hill country view!
Grandchildren, loom, view... heaven on earth!
Can there be a better setting? Grandchildren playing, loom, view…
Sweet little loom with a view!
Sweet little loom with a view! Heavenly!

None of us can come to God on our own terms. Not by our wisdom. Not by our strength. Only through humility do we find God. Humility opens our heart to God. That’s when we see how much He has done to get our attention to tell us He knows us and loves us. My special loom with a view is an example of what it’s like to be known and deeply loved.

May you know you are loved.

Blessings,
Karen

New Warp Comes Alive

Karen

Put on a new warp as soon as possible. That’s my philosophy. A weaving loom should not stay bare. I am ready to begin a stack of rep weave mug rugs (my local weaving group is making them for an upcoming conference).

Cottolin warp on the warping reel.
Cottolin warp seems to light up on the warping reel. The colors become more vibrant when lined up together.

A new warp comes alive as I wind the threads on the warping reel. It is a picture of possibility! Every warp has a beginning and an end. Beginning a new warp on the loom is always exciting. And when I come near the end, I often wish I could weave a little longer.

Cottolin warp chain with vibrant colors!
Warp chain is ready for dressing the Glimåkra Ideal loom.
Pre-sleying the reed for rep weave mug rugs.
Lease sticks are in place under the reed, held up by two support sticks, and the warp has been pre-sleyed. Next step is to set up the warping trapeze.

Have you considered the warp as a metaphor for a life’s span? It is measured out in advance, with a certain type of fabric in mind. The setts, patterns, and structures vary. But they are all meant to be woven. Weft passes are like days and years. For a time, it seems like it will never end. And then, you see the tie-on bar coming over the back beam. You’re reminded that this warp is temporary. We all have this in common: We are mortal. Time is a precious gift. Every pass of the weft is a reminder of our Grand Weaver’s loving attentiveness to complete the weaving he began.

May you enjoy the gift of time.

Happy Weaving,
Karen

How to Splice the Warp – Video

Karen

Knots show up in the warp. It’s a normal part of weaving. Weaving over the knot is almost never a good idea. You have to deal with the little obstacle. This is why it is handy to know how to splice the warp. Thankfully, it’s not hard to do. There are a few standard variations on how to perform this operation. I use a method that I first came across here, by Kirsten Froberg, that makes sense to me. And, hooray, there are no tails to weave in later!

I made a new video to demonstrate how I do it. You can watch it below…

How to splice the warp.
Spliced area of the warp happens to land in the hems of two adjoining towels. Pink weft picks serve as a cutting line between the towels.
How to deal with a knot in the warp. Tutorial video.
Ending the splice. There are no tails to weave in later with this method.

How to Remove a Knot in the Warp

  • Insert a replacement warp end. Attach with a pin.
  • Weave an inch with original and replacement warp ends in place.
  • Cut original warp end. Hang it over the back beam.
  • Weave until original warp end is long enough to reinsert.
  • Insert original warp end. Attach with a pin.
  • Weave an inch with replacement and original warp ends in place.
  • Cut and remove replacement warp end.
  • Trim cut warp ends after wet finishing.

May the knots that get in your way be easy to remove.

Happy Weaving,
Karen

Quiet Friday: Lease Sticks in Place

Karen

What is the first thing I do when I have a new warp to put on the loom? Insert lease sticks. When I wind a warp on my warping reel, the ends follow an alternating over/under pattern between two pegs. This forms an “X” in the wound warp, and keeps the warp ends in sequential order. This “X” is called the lease cross, and I use lease sticks to secure it before proceeding. Hence, the lease sticks take first priority as I begin to dress the loom. Essentially, they hold the warp together.

Dressing the loom with a linen warp.
New linen warp. As viewed from the front of the loom, two long sticks support the reed and lease sticks for pre-sleying the reed. The lease sticks are in front of the reed.
Lease sticks behind the beater. Linen warp.
As viewed from the back of the loom, the warp is under tension (from the warping trapeze). Lease sticks have been moved to position behind the beater.
Dressing Glimakra Standard loom.
Warp ends are straightened and evened out behind the lease sticks.
Beginning to beam a linen warp.
Reed is placed in the beater and centered.
Ready to begin beaming this linen warp.
Lease sticks are moved forward, to just behind the beater. Ready to begin beaming the warp!

This Christmas, remember to keep Jesus first. Jesus, the humble king, was born to die on a cross that we may live. In Him all things hold together. Joy to the world!

May your threads stay in order.

Have a Good Christmas,
Karen

Delight of a New Warp

Karen

Warp wound onto the back beam, as seen through the beater, only adds to the expectant delight. The new warp is tied on and the treadles are tied up. The next step is to wind a quill with linen thread to put in the ready boat shuttle! This is joyous anticipation for a handweaver.

New warp on the back beam, seen through the beater.

Immanuel, God with us, Jesus Christ. He came to live among us. The one who came to save us lives among us. He delights in us, loves us, and rejoices over us. Imagine that! The Lord rejoices over you. The Grand Weaver delights in his creations. Why are we surprised?

May you be delighted and be a delight.

Merry Christmas to you,
Karen