weft – Page 3 – Warped for Good

Handweaving Dilemma

June 2, 2020June 1, 2020 Karen

I am making great progress on my drawloom rag rug, closing in on the final segment. And then, I take a picture and the camera reveals something I had failed to see. A mistake! Here is the dilemma that I’m sure other weavers face, too. It’s an internal dialogue. I can live with the error. Or, can I? No one will notice. Well, I certainly will notice. But I am sooo close to the end. I really don’t want to undo the last forty minutes of weaving. What would you do?

Mistake in the weaving, exposed by taking a photo. — Photo reveals my mistake.

Back it up. Using the chart that I follow for pulling draw cords, unit by unit, I work my way back until I get to the error. On reflection, doing the task is easier than thinking about doing it.

Removing weft to fix an error. — Backing up.

Single-unit drawloom. — One single unit draw cord makes all the difference. This cord should have been drawn in the affected rows.

Rag weft is taken out to correct an error. — Undone. Weft is removed. The mistake has been taken out.

Drawloom rag rug. Correcting an error. — Ready to start fresh from here.

My feelings can fool me. I don’t feel like going back and correcting my mistake. This is the time to pause and listen. Wisdom is at the door. Wisdom requires thinking, and listening, and time. Time is my friend, if I refrain from hurry. Wisdom is much like the skill of an experienced craftsman—one who understands precision and artistic expression and do-overs. Wisdom knows that patience is powerful. The easiest way to do something often forfeits the greatest rewards.

May you keep your ear at wisdom’s door.

Peace,
Karen

Tried and True: Outsmart the Rag Rug Weft Tails

December 10, 2019December 7, 2019 Karen

What do you do with weft tails on a rag rug? Normally, you wrap the weft tail around the outer warp end and tuck it back into the shed. But what about color changes? If you have several color changes in a row, you can end up with extra bulk on one selvedge or another from those tucked-in tails.

3 Ways to Outsmart Rag Rug Weft Tails

TWO PICKS For a two-pick stripe, leave a tail of several inches on the first pick. For the second pick, lay the weft tail from the first pick in the shed. Lay in the second pick, and cut the fabric strip to overlap the weft tail in the shed. This eliminates any extra bulk at the selvedges. (All tails are cut at a steep angle.)

CARRY IT When feasible, carry the weft up the side. If a weft is out of play for only one or two rows, do not cut it. When another weft enters the shed, make sure it encircles the idle weft.

DISTRIBUTE Whenever possible, avoid tucking in weft tails two picks in a row. Wait, and tuck in the tail on a subsequent pick.

HERE IS AN EXAMPLE:

How to outsmart rag rug weft tails! — Gray weft ends with weft tail tucked in. White tabby weft tail is not tucked in.

Tabby weft is beaten in, and weft tail is tucked in. In the middle of the rosepath medallion the orange print weft is carried up the side until it is used again. For the gray strip that follows the last white tabby pick, the weft tail is tucked in on the second gray pick.

One more thing. Cut the weft tail extra long if you are tucking it in a row with weft floats, as in rosepath (Like the center pick in this medallion). This helps keep that weft tail from popping out of place. You don’t want those tails to start waving at you.

May you pay attention to the details.

Happy Weaving,
Karen

Process Review: Leftover Linen Waffle Weave Washcloths

October 22, 2019October 19, 2019 Karen

This is the kind of weaving results that makes me giggle like a child. Waffle weave is one of those things I have been intrigued about for some time, and have wanted to give it a try. Will it really buckle up into waffled wrinkles? Will linen do that? Will it be even better than I expect? Yes, yes, and YES. Talk about transformation!

Using linen thrums for weft. — Taken from thrums, each length of thread is added with a square knot, which makes for slow quill winding. And slow weaving, as I untie each knot that comes along, and overlap weft tails in the shed.

Made with linen leftovers. Weft tails cover the surface. — Shaggy thick blue linen weft tails cover the surface.

Everything in these waffle weave washcloths is linen that has been leftover from previous projects. The tail end of linen tubes, quills that didn’t quite get used up, thrums, and threading missteps that gave me skinny warp chains of several meters. The warp is 16/2 linen, but the weft is everything from fine linen threads, to bundles of threads, to coarse linen rug warp. I discovered, as you will see, that the thicker the weft, the more pronounced the wrinkles. The thickest wefts have given me delightful accordion pleats.

Waffle weave washcloths made entirely of leftover linen. — Wet-finished linen waffle weave has a surprisingly soft hand. After hemming, I am trimming the weft tails to 1/4″, leaving a hint that this is made of leftovers.

Please enjoy this process video of the making of leftover linen waffle weave washcloths! Watch to the end to see the squishiness of this unusual cloth.

Don’t think that this is the end of waffle weave. I am already thinking of all the interesting possibilities…

May your best wrinkles make you giggle.

Happy Happy Weaving,
Karen

Tried and True: Leftover Linen on the Band Loom

October 8, 2019October 5, 2019 Karen

Remember that time you miscalculated when planning your warp? You found the mistake when you were threading, and you ended up with an extra group of ends. If you have ever done something like that, then you understand where this leftover linen warp came from.

This little linen leftover warp is now on the Glimåkra band loom. I removed two ends to get a warp with symmetrical colors. It’s perfect for making hanging tabs to go on the leftover linen waffle weave washcloths. The weft on these band loom shuttles is from one of the little linen warp chains I mentioned last week. (See Put the Linen Back to Use.)

Leftover linen to use as weft on the band loom. — Linen from a leftover warp chain fills the little band loom shuttles.

Band Loom weaving. — Weft tails show the color variance–turquoise and blue–in the leftover linen used for weft, indistinguishable in the selvedges of the woven band.

When the thread comes to an end on the shuttle, I follow this simple process to begin a new weft.

Place the ending weft through the shed, leaving a tail of at least 1/2”.

How to change the weft on the band loom.

Without changing sheds, lightly tap the weft in place with the band knife.
Bring the new weft on a shuttle through the same shed, going in the same direction as the previous weft’s shuttle, leaving a tail of at least 1/2”. (There is now a weft tail extending in both directions.)

How to add a new weft. Glimakra Band Loom.

Without changing sheds, lightly tap the new weft into place with the band knife. (This helps to make a snug fit for the two wefts in this shed.)
Change sheds. Beat firmly with the band knife.
Send the weft back through.

How to end one weft and begin another on the band loom.

Beat firmly, and continue weaving.

Instructions for ending and starting wefts on the band loom.

After weaving 1/2” further, clip off the weft tails; or, clip all the tails after the entire band is woven and has been cut from the band loom.

Linen band weaving for hanging tabs on linen washcloths. — Weft tails are left extended on this band. I may trim some of them later to 1/4″ for effect, to be used as hanging tabs on the leftover linen waffle weave washcloths.

May you put your leftovers to good use.

Happy Weaving,
Karen

Put the Linen Back to Use

October 1, 2019September 28, 2019 Karen

Almost in tears, I chained off the remaining linen warp, a handful of ends at a time. I had come to the end of the Lizard tapestry. There was still enough warp to weave another small tapestry, but because of our move, there wasn’t enough time. Oh, beautiful linen, what am I going to do with you? Too precious to hide or throw away. See Quiet Friday: Lizard Tapestry.

Linen washcloths, made completely from linen leftovers. Now, almost a year later, this is the answer for my precious linen warp—now weft. A single thread, or two or three bundled together. What a glorious way to put the beautiful linen back to work. See how these colors—blue, turquoise, and brown—influence the warp colors (also all leftovers)? It’s delightful.

Three threads are grouped together, and lengths are connected with square knots, and wound onto a quill for the boat shuttle. When I come to a knot while weaving, I untie the knot, overlap the threads in the shed, and leave weft tails exposed. I plan to clip the weft tails shorter, later, after wet finishing.

Where have your dreams and hopes been cut short? We all have times when disappointments make us wonder about our purpose. The Lord isn’t finished with you. As the Grand Weaver, he knows how to put leftovers to use. The Lord weaves us into connections with people. Influence a few for good. Your kind touch makes a difference in those lives with whom you personally intersect. The outcome is delightful.

May your connections be worthwhile.

Love,
Karen