Startling Surprise at the Loom

A startling surprise greeted me when I sat down at the loom yesterday afternoon! The sun was shining through the window and sparkles of light were dancing on the loom. The surprise happened when some of the light made its way under the woven warp and shined up through the cloth, revealing a hidden pattern. Whoa! I discovered a secret passageway in an old majestic house…accidentally! That’s what it felt like.

Afternoon light at the loom. Linen 5-shaft satin towels.
Linen towel in five-shaft satin dräll. Sunlight dances on the woven and not-yet-woven warp.
Linen towels in 5-shaft satin dräll.
Block pattern on the towel changes, and is emphasized with the change of weft.
Light through the fabric reveals a hidden structure!
Light comes up through the fabric on the left side of the loom, revealing a hidden structure in the cloth.

This is five-shaft satin, not goose-eye twill. How fascinating to get a glimpse of the inner structure of the cloth. I didn’t expect it, but it does make sense that the treadling pattern is woven into the fabric. But you won’t see it unless light shines through just so.

The Lord knows us intimately. He knows what we do and why we do it. Where we go and what our plans and intentions are. He not only knows what we say, he knows the thoughts behind our words. God is not surprised. He knows it all. His light reveals our inner structure. May it be pleasing to Him.

May you be pleasantly surprised.

With you,
Karen

Treadle Adjustments on a Countermarch Loom

The countermarch loom is known for having a clean shed, so that is my goal. Is that possible for ten shafts and ten treadles? The first treadle I step on reveals that treadle cord adjustments are definitely needed!

How to evaluate the shed and adjust on countermarch looms.
Before making any adjustments, a few of the sheds look impassable, like this one.

I learned the basics of making adjustments to treadle cords from Learning to Warp Your Loom, by Joanne Hall, and The Big Book of Weaving, by Laila Lundell. I also gained valuable experience from Vävstuga Basics, with Becky Ashenden.

Here’s how the process looks for me, with this ten-shaft, ten-treadle project as an example.

I keep the following note on my iPhone. It helps me remember how things work.
I fill in the blanks for each treadle, noting which shafts are too high or too low. Then, using my iPhone note for reference, I make the needed adjustments.

Note on iPhone for making countermarch treadle adjustments.

  • The first time through, I am primarily interested in the bottom of the shed. I make adjustments to clear the shed enough to be able to weave a little bit.
  • Weave an inch or two. It is surprising how the shed cleans up with a little bit of weaving.
Adjusting treadles on countermarch loom.
Bottom of the shed has threads on one or two shafts that need to be lowered. After making those adjustments, this treadle will have a clean shed for weaving.
  • After weaving that first inch or so, I go through a second, and a third time, if needed, to get a clean shed on each treadle. Adjustments for the top of the shed are only needed if there are threads that will interfere with the shuttle.
Clean shed of a countermarch loom. Tutorial.
No hindrance for the shuttle here. This is the kind of shed I hope to see on every treadle.

When I first see a messy shed, I think, “How will I ever get my shuttle through that?” But it turns out to be little adjustments here and there. It’s not too difficult if you understand the loom.

Five-shaft satin dräll in linen. How to adjust countermarch treadles.
After all treadle adjustments have been made, the shuttle glides freely through the shed. And pick by pick, linen threads become cloth.

Nothing is too difficult for the one who made heaven and earth. Our Creator knows how to help us. He hears our prayers for help, and little by little, we see what He is doing as the shed clears and the shuttle glides through, unhindered.

May little adjustments clear the way for you.

With you,
Karen

Tools Day: Countermarch Loom Pros and Con

When my long-held dream of weaving on a floor loom became a possibility, I started my journey with questions. What are the pros and cons of the different types of looms? After considerable research, a winner emerged—the Swedish countermarch loom!

Pros and Con of Countermarch Looms
(My experience is with Glimåkra. Other countermarch looms may differ.)

Pros

  • Weave anything. Rag rugs to lace-weight fabric.
  • Hanging beater. Swinging beater has momentum that enables a firm beat. No strain to shoulders, arms, or wrists. Asset for weaving rag rugs, and superb control for cloth with an open weave. Beater placement is adjustable, making it possible to weave longer before advancing the warp.
  • Rear-hinged treadles. Pressing treadles is effortless, no matter how many shafts. No strain on back, legs, knees, or ankles, even with robust weaving. Because treadles are close to each other, I press correct treadles with sock- or bare-footed ease…without having to watch my feet. Ample foot rest makes it easy to trade feet when using many treadles.
  • Clean shed. Stepping on a treadle raises and lowers shafts at the same time, so a great shed is not only possible, but usual.
Horizontal countermarch. Info about CM looms.
Glimåkra Ideal with horizontal countermarch. The cords from the countermarch jacks at the top of the loom go straight down through the warp to the lower lamms. The lower lamms connected to treadles cause shafts to lift when a treadle is depressed.
  • Even warp tension. Because shafts are both raised and lowered, tension is equal on raised and lowered warp ends. Even warp tension is good for all types of weaving. This even tension makes a tight warp possible. Perfect for linen, and for rugs.
Vertical Countermarch Loom - info about CM
Gimåkra Standard loom with vertical countermarch. Cords from the countermarch jacks go over the side of the loom to the lower lamms below. The upper lamms (not pictured) attached to treadles cause shafts to sink when a treadle is depressed.
Threading ease of countermarch looms.
Bench sits in the loom for threading heddles. I call this my little playhouse.
  • Texsolv heddles. Heddles can be easily added or removed from shafts (shafts are also easily added or removed). Quiet. Easy to thread.
  • Perfect fit. A petite person like me can weave on a large loom (my Standard is 47”/120cm) as comfortably as someone with longer arms and legs. Able to sit in upright posture for weaving.
  • Wooden. The loom is primarily wood. Bonus if you appreciate natural beauty of wood. Held together with wooden wedges and a few bolts. No screws or wing nuts.
  • Scandinavian clarity. Because of the Swedish loom, I adopt Swedish weaving practices and have an interest in traditional Scandinavian textiles. The loom fits the style. Streamlined design, precision, systematic and logical processes, and beauty with function.

Con

  • Treadle tie-ups. Shafts are connected to upper lamms and lower lamms. Treadle cords with a bead at one end are hung in the lamms. Lamms are then attached to treadles. Treadle tie-ups normally fall under the Pros category, because this is what enables the loom to have the clean shed it’s known for. But since I just finished tying up ten shafts to ten treadles (that’s 100 treadle cords), this is my least favorite part right now. 😉 (The weaving pleasure more than makes up for it, though.)
Countermarch treadle cords. Pros and cons.
One hundred treadle cords hang from upper and lower lamms. The only thing left is to attach all the cords to treadles. 😉
Treadle cords for 10 shafts! 5-shaft satin coming up!
Treadle cords are attached. Little anchor pins lock each cord into position under the treadle. After a few adjustments, the shed on each treadle is good. The loom is dressed! Five-shaft satin dräll coming up!

Conclusion:
When I weave on my Glimåkra Standard countermarch loom, I am soaring like an eagle. I’m sailing with the spinnaker up. I am a pipe organ maestro. I am dreaming while fully awake. This is everything I imagined weaving could be, only better.

Countermarch looms - pros and con.
Testing weft options. Gorgeous handcrafted damask shuttle, Chechen wood, made by Moberg Tools. Five-shaft satin dräll–a weaver’s dream.

For more in-depth information about countermarch looms, comparisons of looms, and other fantastic resources, see articles written by Joanne Hall, found at Glimåkra USA.

May you live your dream.

Very Happy Weaving,
Karen

How Long Did it Take You to Weave That?

It’s the question we expect to hear. “How long did it take you to weave that?” “…Well, hours and hours, basically.” After almost three hours of threading, I am nearly to the halfway point. How can I convey all the necessary work of dressing the loom? Or, the time it takes to practice a new skill at the loom? Or, the finishing work of twisting fringe, hand hemming, or cutting and sewing?

Threading ten shafts.
Threading ten shafts. The two newest shafts are pale compared to the others. They haven’t yet developed the golden hue of the wood around them.

With any hand-crafted article, there is more than meets the eye. Why do we want to know how long it took to make it? Are we trying to measure value, or understand the maker’s process? Or, is it simply a statement of incredulity about something we didn’t know was possible?

Threading ten shafts--in silence.
For this threading, I sit in silence. No music, no podcasts, no wandering thoughts. I’m easily thrown off by distractions, especially when threading ten shafts.
Threading linen on ten shafts.
Half of the 16/2 linen warp is threaded.

We have a Maker. He fashioned our physical selves; we see that. He also made us with heart and soul. He starts the weaving process before we are born, and takes as long as he needs for the finishing. The Lord, our Maker, includes the necessary development of our character, and the intricacy of our personality, and our dreams and hopes. We are more than meets the eye. How long does it take to make a person? A lifetime.

May you enjoy the process.

Love,
Karen

What a Web We Weave

Threading errors happen. But you can reduce their occurrence. After beaming a warp, I count the warp ends into threading groups before I start threading. Always. This is the first step in reducing threading errors.

Beamed linen warp. Tied into threading groups.
Beamed linen warp. Ends are counted into threading groups, and tied in loose slip knots.

The second step in nearly eliminating threading errors is to check every threaded group right after it’s threaded, thread by thread. These intentional steps expose mistakes early in the process. I would rather find an error now than later.

Threading ten shafts.
After a group of warp ends is threaded I check every thread to make sure it is on the correct shaft.
Threading ten shafts. How to avoid errors.
View from the back beam. Every thread is now in its proper place. Two ends had ended up on wrong shafts, so threads were taken back out and corrections made. Threading ten shafts can get confusing, so it is critical that I check my work.

Did the spider check for threading errors before weaving her intricate pattern? Did she know her invisible web could be seen on a dew-rich foggy morning?

Napping spider on her almost invisible web.
Napping spider on her almost invisible web.
Spider's web in dew-rich foggy morning.
Early morning dew reveals the outlines of the spider’s web. Not wanting to be seen, the spider quickly climbs away to hide when I come close to her woven threads.

Our world tells us to make enemies, and hate haters. To grip what is mine, and demand my rights. It’s in my human nature to be that way. But love is different. Love your enemy, do good instead of hate, pray for those who mistreat you. Is that possible? Yes, if you know the love of God firsthand. Love makes you different. It changes you, making you want to take account of your attitudes, and check your motives. Count threading groups, and check the threading. There will be errors as you weave, but they are learning experiences, not fights. Remember, the invisible web we weave may not be as invisible as we think.

May you be different.

With love,
Karen