Tips for Taming String Yarn Weft Tails

Those pesky string yarn weft tails! There is a lot of starting and stopping with these mug rugs. Normally, tucking a weft tail back into the shed adds a bit of extra thickness at the selvedge. So, what about this very thick weft? It has the potential to throw everything off balance. A few easy tips help minimize the distortion the thicker weft can cause.

Taming String Yarn Weft Tails

  • Begin the thick weft on alternating sides. This will prevent one selvedge from building up more than the other.
  • Taper the end of the string yarn, cutting it at a steep angle.
  • Starting about 1 3/4″ inside the selvedge, send the shuttle through the shed toward the selvedge, going over or under the outermost warp end. Pull through until almost all of the weft tail is caught.
What to do with string yarn weft tails.
Starting the shuttle from the inside, going outward, is an easy way to catch all the separate threads of the string yarn.

Taming string yarn weft tails.

  • In same shed, send the shuttle back through to the other side, aware of encircling the one warp end.

Tucking in string yarn weft tails. Tips.

  • Beat. (Beat on open shed. Beat again. Change sheds. Beat again.)

How to manage string yarn weft tails.

  • Continue weaving.

Rep weave mug rugs. String yarn weft tails - tips!

  • To end the thick weft, leave a 1 3/4″ tail, and taper the end of the string yarn, as before. Lay the tail back in the last shed, going around the outermost warp end. Beat.

Things happen that throw us off balance. From personal celebrations to unexpected losses. Don’t be afraid. Putting trust in the Lord minimizes the inner turmoil. The Lord is my light. He lights my way. What is there to be afraid of? Wholehearted trust in the Lord pushes fearfulness away.

May you walk in a lighted path.

Happy weaving,
Karen

My Best Weaving Stunt to Date!

Do you ever go out on a limb? I’ve been known to play it safe. But not today! My excitement for weaving this kuvikas structure was severely dampened when I saw that the pattern in the cloth was not the pattern I intended. What happened? I had switched the threading for shafts 1 and 2! Consistently, too–all the way across the warp.

Start of kuvikas (summer and winter), and discovery of threading error.
While testing weft color options, I realize that this is NOT the pattern for which I thought I had threaded. Even though this pattern does reveal an “I” for “Isenhower,” I had my heart set on a square within a square.

I could leave the threading as is. No one would know. Oh, the arguments I had with myself at this point. “Take it out, and re-thread.” “You’d be crazy to take it out and re-thread.” The crazy self won. (I did find myself asking, “What solution would Becky Ashenden, the weaving solution genius, come up with?”) Here is the stupendous thing: I was able to correct the pattern by doing shaft-bar gymnastics. And no re-threading! What?! (I documented the process and will bring it to you in my Quiet Friday post at the end of the month.)

Kuvikas (summer and winter), cotton tabby and tencel pattern weft.
The sight of these little squares within squares makes me extraordinarily happy! 8/2 cotton tabby weft. Doubled 8/2 Tencel pattern weft. Kuvikas, as this weaver intended it to be.

There are times when we are called to go out on a limb. It’s the right thing to do. But the prospect is overwhelming. We ask, “Who? Me?” And “How, Lord?” Trust the Lord, one step at a time. He will be with you. Marvelous things will happen, catching even you by surprise.

May you know when to go out on a limb.

Happy,
Karen

Kuvikas and Taqueté

Kuvikas and taqueté. There are always new things to try. I’m back to eight shafts. This Glimåkra loom is highly adaptable. It is no problem to set up the loom for a new project. You may have guessed that I like to switch it up. Four shafts or eight shafts, two treadles or ten. And, change the tie-up, too. I don’t mind. With this project, I am going to change the treadle tie-up again at the midway point, switching from kuvikas to taqueté.

Threading eight shafts on my Glimakra Standard loom.
Threading eight shafts. Four pairs of shaft bars have been added to switch from a four-shaft project to an eight-shaft project. Four additional upper lamms and lower lamms have also been added to the loom.

If you know and practice the basics, it’s not frightening to try new weave structures. Every new experience builds on what I’ve learned before. I can trust the system of weaving that I’ve been taught, and that I practice with every project. It makes sense.

Aquamarine cotton. Threading my Glimakra Standard loom.
After the warp is beamed, the warp ends are tied with an overhand knot into groups, according to the threading pattern. In this case, 48 ends are in each group. Counting the ends into groups helps eliminate, or at least reduce, threading errors.
Threading eight shafts for kuvikas and taqueté.
Complex, but not complicated. Warp ends are inserted into specific heddles to set up the loom for a particular type of cloth. Very systematic.

Don’t be afraid. The Lord not only teaches us his ways–his system, but offers us his strength while we learn. I can trust him for that. Trust replaces fear. I don’t have to find my own way, or guess. The system works. It makes sense. I learn to weave, and live, one step at a time, with freedom to enjoy the process.

May you rise above your fears.

All the best,
Karen

Unrolling New Towels

The length of woven cloth unrolls and unrolls until you get all the way back to the front tie-on bar. The towels are 70% linen. Oh, how I wish you could touch this fabric! You would feel the crispness of a linen tea towel, with a little bit of cotton softness.

Cutting off! Plattväv linen towels.
Plattväv towels and one table square are unrolled from the loom. Last to come through are the warp end knots securely hugging the front tie-on bar.

It all comes back to the front tie-on bar. This is where the weaving begins. The warp ends must be secure at the beginning. No one wants the tie-on knots to slip as the woven fabric rounds the cloth beam. You want warp ends to be securely fastened, with no chance of losing their grip. Your cloth depends on it.

Plattväv towels waiting to be hemmed.
Plattväv towels, with 22/2 cottolin warp, and 16/1 linen weft. The towels have been washed, dried, and pressed. They are ready to be hemmed.

Think of yourself gripping onto hope. Think of the knots that hold tightly to the front tie-on bar. Hold tightly to hope, and don’t let go while the weaving progresses. Our hope is not some vague wish. Our hope is based on the redeeming work of Jesus Christ–God’s promise to be with us. God can be trusted to keep his promise. Don’t waver in your tight grip on this true hope. The fabric of your life depends on it.

May you be known for hope.

Hopeful,
Karen

Striped Warp Freedom

Winding a warp like this is intricate work because of the frequent color changes. These narrow warp stripes provide the perfect canvas for plattväv accents. The simple weft float pattern, woven across the width every five centimeters, adds embroidered-like stitches to the cloth. Everything else is a breeze. It’s plain weave.

Plattväv towels on the loom. Karen Isenhower
Cottolin warp and 16/1 linen tabby weft, with doubled 16/1 linen pattern weft.

It’s good to have a plain weave project every now and then. It’s a reminder of how freeing it is to let the boat shuttle fly back and forth between your hands. Rag rug weaving isn’t like that. Soft alpaca scarf weaving isn’t like that. I’m zipping along, …only stopping to move the temple, advance the warp, and add the black linen accents. No worries here.

Plattväv towels on the loom. Narrow warp stripes advantage.
Two red picks are woven for the cutting line that separates the towels. First towel is seen wrapping around the cloth beam.

Consider all that has been prepared for us to have a meaningful life. Why should I worry? Who wound the intricate warp and put it on the loom? Doesn’t the Grand Weaver know what it takes to complete his design? We enter the Lord’s place of rest through the door of trust. True rest is worry free. Let the shuttle fly. Let the weft floats embellish the cloth. Come enter the place of rest.

May your worries slip away.

Plain weaving,
Karen