a handweaver's journey
I want to weave two floor runners for a specific location in our home. I could do some figuring and guessing. Instead, I am weaving one repetition of this spaced rep rag rug. Now, I have a reference point. All I have to do is measure and see how many repetitions to weave for the length I need. Measuring removes the guesswork. Let the runners begin!
May you remove the guesswork where possible.
Happy Weaving,
Karen
I’m at fresh starting place. After finishing another double binding rag rug, I have tied the rug warp back on. I’m ready for a new variation in this rag rug series of block designs. Rug warp lets me stop and start. Cut off and tie back on. It’s as simple as that.
May your progress be observable over a span of time.
Happy weaving,
Karen
I reached the end of the drawloom warp on Tuesday evening. Wednesday morning, before Steve and I finished loading up the Casita travel trailer, I cut the warp off the loom. I grabbed a handful of thrums, chained them so they wouldn’t tangle, and threw the bundle into a small bag along with my cowgirl band heddle. And off we went for a short little getaway!
Relaxing under shade trees at the campground, I weave what I need for the four towels’ hanging tabs.
Back home, after the towels are wet finished and hemmed, I have an “a-ha!” moment: Only one of these cloths shall be used as a towel. The other three cloths will serve as Christmas Snowflake banners.
Christmas Snowflake banners. Revisit the process with me, start to finish:
To see the towels from the first half of this warp, click here: Process Review: House and Home Towels. To see more about the cowgirl band heddle, click here: Cowgirl Band Weaving.
May you have “a-ha!” moments that change how you see things.
Love,
Karen
This is the fourth and final towel in my Snowflake series. Right now in Texas hill country it is extremely hot and dry, so these few gentle snowflakes are a welcome sight, even if only made of thread. We look forward to cooler days and moisture from the heavens.
This Myrehed combination drawloom attachment functions as a thread lifter. When I pull a draw handle for a pattern shaft, a series of thread units are raised. When I pull a draw cord for a single unit, one unit of threads is raised. I am using 45 pattern shafts for the repeated snowflake border designs on these towels. The center area of each towel has small and large snowflake designs at varying intervals. These irregular designs are created using 148 single units. It’s because of all those lifted warp ends that we can create woven snowflakes.
We expect to have worries in this life. Daily needs come as repeated patterns. Other disturbances come at irregular intervals. Worry is eliminated in God’s kingdom. God’s kingdom has a worry lifter–Jesus. He invites us to give him our worries and trust him to care for us. Imagine the one-of-a-kind design that emerges when worries are lifted!
May your worries fade away.
In living hope,
Karen,
A fluffy sheepskin stays between me and the hard wooden bench at my Glimåkra Standard loom. Softening your loom bench makes weaving that much more pleasant. Last week Jane asked a great question: How do you secure the sheepskin on the bench? To answer that, I invite you to follow along as I secure the sheepskin on my drawloom bench.
1 Mark placement for 6 grommets on the underside of the sheepskin.
2 With block of wood underneath, hold grommet hole punch over one of the marked positions. Tap tool with the hammer to cut a small hole.
3 Insert the protruding ring of the top grommet piece (grommet) into the fur side of the hole.
4 With fur side down on the block of wood, fit bottom grommet piece (washer) on top. Align grommet and washer between the base and flaring tool. Firmly tap with hammer until the two grommet pieces are tightly fastened together.
5 Repeat steps 2 – 4 for each of the 5 remaining grommets.
6 Lay the sheepskin fur-side down on a table or floor. Center the seat of the bench upside down on the sheepskin. Bring the sides of the sheepskin over the bench. Measure the distance between opposing grommets.
7 Double the grommet-to-grommet measurement, and cut three Texsolv cords that length. Sear the cut ends in a flame.
8 Secure the sheepskin to the seat of the bench by lacing one of the cut Texsolv cords through two opposite grommets. Tighten the cord and lock it in place with an arrow peg. Repeat for the remaining two cords.
Sit in immovable comfort.
While we’re at it, let’s fix up one more bench cover…
May you see where you can soften things up.
Happy Sitting,
Karen