Dream Weave and Slow Reveal

Karen

This project is a slow reveal. I am showing what I am doing now, but I am waiting to tell what this will become. There is a flurry of preparation behind the scenes. In time, you will see what develops on the loom. You and I both will find out if I am jumping in over my head. Or, if I can, in fact, pull this off.

Warping reel with 16/2 linen for a new warp.
Warping reel with 16/2 line linen for a new warp.
Dressing the Glimakra Ideal loom with linen.
Linen shows itself to be a beautiful mess.

This is a gorgeous linen warp, with three shades of 16/2 linen: sable, northsea blue, and persian blue. I am dressing my Ideal loom to almost full weaving width: 93 centimeters. The sett is 3 ends per centimeter in a 30/10 metric reed (equivalent to 7.6 ends per inch). I am intensely eager and cautiously optimistic regarding this weaving adventure.

Linen. Dressing the loom.
Linen. Sable, northsea blue, and persian blue. Bockens linen comes with color numbers only. It is interesting to see the names given to the colors by different suppliers. These creative color names are from Vävstuga.
Ready to beam this linen warp on my Glimakra Ideal loom.
Pre-sley reed is in the beater. It’s time to grab some warping slats, slide the lease sticks forward, and beam the warp.

Love is like a hidden dream in your heart, awaiting expression. Love goes with you. It is a treasure you get to bestow on others. In some cases, your treasure may be their only hope. The God of love with us weaves the love of God in us, as his faithfulness is revealed over a lifetime. If we could see the end result the Grand Weaver has in mind, most certainly it would make us smile.

May the God of love and the love of God be with you.

Secretly,
Karen

Building Blocks in Double Weave

Karen

Troubles. What troubles? All is forgotten now that the shuttle is ready to soar. After my threading misadventure and correction, I’m ready to weave! But first… The treadle tie-ups need adjustments. And then, after weaving a couple inches, a few more adjustments. Now the shed is nearly perfect on every treadle. Ready, set, wait a minute… Sample. Which shuttle goes where to lock in the weft? How many picks make a square? Is my beat consistent?

Waterfall of colorful threads over the back beam!
Like a spectacular waterfall, warp ends splash with color over the back beam. First adjustments have been made to treadle tie-ups. Ready to start weaving the sample.
Sample first. Double weave throw about to begin.
Sample gives opportunity to practice and experiment. Checking shed clearances, weft color tryouts, synchronizing two shuttles, consistent beating–a few of the reasons why it makes sense to sample first.

After completing the sample, I am now weaving the wide dark plum beginning border of the double weave throw. In a few inches I will be enjoying the colorful blocks that we have all been waiting for. Building blocks. Success, setbacks, adjustments, and practice, all build a foundation of weaving experience.

Beginning dark plum border of a double weave throw.
Here it is. The real thing. The beginning border of the actual double weave throw.

Build. If I’m not careful, my attention goes to the building up of myself. Yet, love focuses on others to build them up. It’s through a process of success, setbacks, adjustments, and practice that love flourishes. When your strong desire is to see the colorful blocks of the weave, you press through until you see it. Love is even stronger than that. Our example is Christ. His love makes the pattern of love possible in us.

May you build on what you learn.

Happy weaving,
Karen

Double Weave Throw – Take Two

Karen

Nothing about the original draft is incorrect, but when I wrote it in pencil on my planning sheet, I transposed one. little. thing. The threading key. “X = plum; black square = other colors.” Exact opposite of what is written in the draft from The Big Book of Weaving, by Laila Lundell. (See When You Misread the Threading Draft, where I discover my dilemma.)

One little mistake. Big consequences.
Blind to my own mistake, even as I double check my handwritten draft.

Thanks to Fiberworks weaving software I am working out a solution. I adjusted the tie-up, so the treadle tie-ups on the first, third, fifth, and seventh shafts trade places with the tie-ups on the second, fourth, sixth, and eighth shafts. It works. And now, the one little threading error that is clearly visible seems like a breeze to correct!

Ready to weave a cotton double weave throw.
Tie-up adjustments bring the correct warp ends to the surface. Solid stripes of color are set to produce the desired design when woven.
One threading error. No big deal at this point.
One blue warp end stands out like a sore thumb. I’m glad to find this one threading error at this stage in the process.

There are times when my whole perspective needs an adjustment. It’s time for love. Love adjusts our view. At the heart level, love brings about changes in us. It re-sets our attention and motivations. Because God loved us, we can love, too. We don’t see, understand, or know everything now, which shows how incomplete we humans are. But the love that heaven knows is something we get to participate in here and now. Our cloth is far from perfected, but our love adjustments give us a glimpse of cloth from another realm.

May you make necessary adjustments.

Love,
Karen

When You Misread the Threading Draft

Karen

What if you finish tying up the loom, eight shafts and eight treadles, having beamed, threaded, and sleyed 2,064 ends, and the first thing you see when you step on the treadles is… that you misunderstood the threading draft? Do you undo everything and re-thread? Not likely, if it took you eleven-and-a-half hours to do the threading in the first place. I am taking a deep breath. Time to walk away and think. Maybe I can adjust the tie-up, or maybe I can use it as is—a serendipitous design. Should I laugh or cry? My idea to serve my loved ones with handwoven gifts (See Weaving a Gift) is getting off to a rough start.

Double weave throw. Warp is tied on.
Warp is tied on. Ready to tie up the treadles.
Tie-up completed for eight shafts and eight treadles.
Lamms are connected. Treadle cords are positioned. Treadles are tied up. Eight shafts and eight treadles.
Double weave throw.
This view should show solid dark plum all the way across.
Double weave throw on the loom.
This view should show stripes of solid colors, not two-color stripes, with solid bands of dark plum in between.

Serve. I want to offer my best, especially when I’m making a gift for someone dear to me. It helps to look beyond the person, though, and realize my true service is to the Lord. Heart, soul, mind, and hands. I bring my misunderstandings and missteps of the heart to my Master Weaver, who has taken it on himself to make things right. And I’m reminded that as I serve someone with my weaving hands, the true gift is love. This double weave throw will be a reminder of that.

May you recover from your mistakes.

Humbly,
Karen

UPDATE: I have had a chance to put the draft on Fiberworks weaving software and work with it to adjust the tie-up. I think I found a solution. Stay tuned!

Tools Day: Measure Once

Karen

It occurs to me that I am unnecessarily doing something the hard way. Repeatedly. For every new project, I pull out my tape measure to find the right set of lease sticks. The tape measure also helps me select the temple needed for the current weaving width. No more! I do like my tape measure, but why am I measuring these things every time? Why not measure them once and label them?

Solution

  • Measure the lease sticks and write the length in centimeters and in inches on one stick of each pair, in pencil.
  • Use a wood burner to trace the pencil markings. (My husband Steve does this part for me.)
Weaving tip: Measurements on lease sticks.
Wood burner is used to write the length measurement on the end of a lease stick. Centimeters and inches are indicated because I use metric or imperial units, depending on the project.
  • Thread a cord through one end of each pair of lease sticks, to keep pairs together. Hang the lease stick pairs with the measurements clearly visible.
Weaving tip: Measured lease sticks paired together for hanging.
Looped cord is threaded through the lease stick holes to provide an easy way to hang pairs together.
Paired lease sticks, ready for hanging.
Paired lease sticks, ready for hanging.
Lease sticks hanging in the weaving studio.
Pairs of lease sticks hang beside my worktable in my weaving room. My ol’ Beka rigid heddle loom on the wall happens to provide just the right little hanging post for the measured lease sticks.
  • Look up the temple sizes on a website that sells them, and write the size range in centimeters and in inches on each temple, in pencil.
  • Use a wood burner to trace the pencil markings. (Steve, again.)
Weaving tip: Measure the temples.
Range of temple widths is important information when I’m choosing a temple. Weaving width of a project must fit in that range.
  • Store the temples in a manner in which the marked measurements are easily seen.
Weaving tip: Find the right temple size the first try!
No more trying different temples to find one that fits. Now I can look at the markings and select the correct temple the first time.

Now I have permanent at-a-glance measurements for each of these frequently-used tools!

May you find something to simplify.

Happy weaving,
Karen