Tried and True: How to Count to Three – and Other Weaving Tips

We weavers are resourceful. We enjoy finding solutions that make our time at the loom more efficient, while raising the quality of our weaving. We’ve done some of these little tricks so much we don’t think about them anymore. And then, some innovations are things we think up on the spot because necessity, as you know, is the mother of invention.

Keep Count

Necessity: Keep from losing my place with treadling repeats.
Solution: A strip of blue painter’s tape with “3 2 1” and a rubber band, placed on the breast beam. Move the rubber band on the tape (from right to left) to track repeats.

Weaving tips - low tech solutions.
I need help counting to 3 when it comes to treadling repeats. On the Glimåkra Standard loom, I am able to loosen the warp enough to lift the breast beam so I can put a rubber band on it. Without a removable breast beam, one could use a separate small piece of tape instead of a rubber band to keep track.
Keep track of repeats. Blog post with tips and tricks.
Low tech solution for keeping track.

Shuttle Catch

Necessity: Keep from fumbling the catch, having to reposition the shuttle in my hand to send it back across the warp.
Solution: Keep my eye on the shuttle. If I turn my head to watch the movement of the shuttle, my catching and throwing improves immediately. This makes my selvedges improve, too.

Weaving tips and tricks. Easy tip on how to catch the shuttle perfectly.
It is easy to throw and catch the shuttle without actually looking at your hands. I have to consciously remember to turn my head to follow the shuttle with my eyes.

Leave No Trace

Necessity: Keep from leaving slightly perceptible lines in the woven cloth that reveal every time I stop to move the temple and advance the warp.
Solution: When it is almost time to advance the warp, I move the temple and then weave one or more pattern sequence(s) before advancing the warp. This helps me leave no trace of starting and stopping.

Tips and tricks for the weaving loom.
Almost ready to advance the warp, I remove the temple and reposition the pins on my guide tape. Then, I put the temple back on, near the fell line.
Tips about when to advance the warp.
After moving the temple, I weave one or more complete treadling sequences before advancing the warp.
Three simple weaving tips for efficiency and quality!
After advancing the warp, I know exactly where I left off because of my tape-and-rubber-band counter. My eyes are on the shuttle to continue this segment of weaving.

Do you have a simple tip that improves your efficiency and/or quality at the loom? Please share in the comments.

May you notice what you’re doing.

Happy Weaving,
Karen

Step Back to See Your Tapestry Details

The contours of the face are more evident now that the lips are in place. Every cartoon line requires decisions. Shift the color at this warp end?…or, one over? Does this butterfly have too much pink?…maybe it needs more pink? The portrait image happens almost invisibly, thread by thread.

Four-shaft tapestry.
Tapestry detail.
Tapestry portrait.
Tapestry portrait.

I step back often so I can see what I am weaving. Up close, the details are obscure. I step up on the loom bench (very carefully, holding on to the top of the loom) and look through the back end of my binoculars. A distant view of the tapestry comes into focus. It’s encouraging! I can clearly see that the details are working out.

Tapestry portrait in progress.
View from a distance.
Portrait tapestry in progress.
Looking through the back end of the binoculars gives a distant view. I’m looking for distinct lines of contrast and smooth transitions.

We may be too close to our own circumstances to see the details clearly. We make decision after decision, and we hope against hope that things will turn out okay. How can we know what is right? Step away to pray. Slip away with the Lord Jesus to get His view on things. Only when we consult a higher view can we see the bigger tapestry that the Grand Weaver is creating. Prayer, as a conversation with the Lord, helps us see that the details are working out according to his purpose.

May your details become clear.

With purpose,
Karen

Hazards and Rewards of Weaving a Portrait

When you want a better photograph you snap another picture. When you want a better tapestry you take out what you’ve woven and weave it another way. I recently showed you my progress on the tapestry of my mother. (See Tapestry of the Heart.) As I viewed the tapestry in photographs I could see that the 6/1 tow linen that weaves between the rows of wool was too bright. The golden bleached linen is lovely on its own, and melts into the background on the sides of the portrait. But this bright linen draws undo attention to itself within the darker portions of the tapestry because of the stark contrast. The day after that post I undid everything back to the starting line.

Weaving a four-shaft tapestry portrait.
Take One, with golden bleached 6/1 tow linen weft threads interspersed.

Undoing a few weeks of tapestry weaving is not physically hard to do, but making the decision to undo it is hard, indeed. Since then, I have been weaving every day to get back to the point where I stopped everything. This time, I am using a different color tow linen that will make all the difference.

Wool butterflies for a tapestry portrait.
Take Two. Golden beige tow linen, as seen in the header rows, is interspersed in the weaving.
Tapestry portrait in progress.
I was able to save and reuse some of the wool butterflies from the first take.
Tapestry portrait of my mother.
Almost back to where I stopped. Besides changing the linen weft color, weaving a second time allowed me to make other improvements to the tapestry, as well.
Is that a look of approval?
Small sample of each butterfly is pinned to the picture beside my loom. I choose colors for each wool bundle in correlation to its adjacent colors, working out the colors a few steps ahead of my weaving. …Is that a look of approval?

Now, instead of golden bleached, the linen thread is a golden beige that disappears into the fabric, while holding everything together. Come to think of it, that is an apt picture of a mother’s influence.

May you know when to go back to the beginning.

Happy Weaving,
Karen

Process Review: Drawloom Preliminaries

I threaded 888 warp ends. I am getting ready to thread those 888 ends again. It’s part of the preliminary process for a new drawloom project. A drawloom has two sets of heddles. Thread the pattern heddles. Then, thread the ground heddles. I enjoy all the preliminaries because of what they bring about—a delightful new weaving adventure!

Preparing a new drawloom warp.
New drawloom warp of 16/2 cotton is on the warp beam.
Long heddles and lingos for the drawloom.
Long pattern heddles and lingos hang on a pegboard wall in the drawloom studio until needed.

Before I start threading, I count out all the lingos (weights) I need for the pattern heddles. Then, I hang a lingo on each unit of pattern heddles. In this case, there are 148 units, and six heddles in each unit. I move all those prepared units (heddles with lingos) to the back of the loom, get comfortable on my loom bench, and start threading. After a few sessions, I am finished threading the pattern heddles.

Drawloom threading heddles.
Pattern heddles hang at the back of the loom for threading.
Texas hill country Bluebonnets!
On the walking path to my drawloom studio each day I see the startling blooms of our Texas hill country Bluebonnets. Just imagine the unseen preliminaries for this beauty!
Drawloom pattern heddles and lingos.
Threading continues.
Pattern heddles are threaded for the drawloom.
All 888 pattern heddles are threaded! Ground heddles are next…

Next up, I will thread long-eye heddles on six ground shafts. A few more start-up operations after that, and then we will see this big ol’ boat raise its sails and leave the shore for another exhilarating adventure in weaving!

May you enjoy the preliminaries for every new start.

Happy weaving,
Karen

Tapestry of the Heart

It is a daunting task to weave a tapestry of an important person. Do I have enough skill to give what this project deserves? I started with a photograph of a beautiful woman in her eventide years, and made a workable cartoon. The person in the picture is someone who has significantly influenced my appreciation of beauty all around. This is my mother.

Tapestry weaving that starts with a photo of a beautiful woman.
Photo enlargement is printed and taped onto poster board. I keep it near the loom for reference while I’m weaving.
Planning a new 4-shaft pictorial tapestry!
Cartoon replica is printed and taped to foam board. I plan out butterflies for the first few rows of the tapestry and pin them in their place on the picture. Yarn overflow is on the windowsill beside the loom.

In preparation for the tapestry, I have been weaving sample areas of the cartoon. The eyes, the chin and neck, the mouth, the edge of the ear. The biggest lessons I’ve learned are to exaggerate contrasts in value, and to dull the colors that are adjacent to colors that I want to appear bright. It’s time to step out and give myself to the task. This is where I aspire to show more than the unique features of my mother’s face. It’s where I show her heart.

Beginning wool butterflies for a new tapestry.
First row of the tapestry has only four butterflies. Additional butterflies are added gradually over the next few rows. (Tapestry begins with a few rows of white 6/1 tow linen.)
Weaving a pictorial tapestry of this lovely woman.
Printed reference cartoon helps me check my work as I go along. The cartoon that is under the weaving on the loom is not only larger, it is printed at a lighter setting, which makes a better weaving guide for me.

A generous heart always has enough. Giving out of our surplus is not generosity. However, if I give you what I’d rather keep, I give you some of myself. Give time, resources, support. Share talents, fascinations, insights. Mom, thanks for giving me so much of yourself.

May your loved ones benefit from your generosity.

With gratitude,
Karen