drawloom – Page 13 – Warped for Good

Single-Unit Boldness

December 31, 2019December 30, 2019 Karen

Doing something bold is a dramatic way to end the year. I have added 200 single-unit draw cords to the drawloom. The bold thing is that I am using lanyard clips. This changes the usual process of setting up the draw cords, so I’m making some of it up as I go.

First, I sleyed the cords through the single-unit reed (used for spacing the draw cords). Next, I put a one-inch lanyard clip on every lift heddle. Now, one at a time, in order, I attach a lift heddle to a pattern unit, and then clip the lift heddle to the draw cord. Repeat 200 times. (I picked up the clever tip about lanyard clips online from Su Butler, who has, admittedly, a different type of drawloom setup than what I have.)

When this drawloom rag rug project is finished, I should be able to unclip the draw cords from the pattern units, leave the draw cords in place on the loom, and start fresh for the next project. Progress through the new year will reveal whether this bold action is a good idea…or not.

Journey in Pictures:

Setting up single-unit draw cords on the drawloom.

Lift heddles for the single-unit drawloom.

Attaching lift heddles to single-unit draw cords.

Lanyard clips on the drawloom. Process pics.

Placing the single-unit reed on the drawloom.

Pattern heddles in position. Drawloom process pics.

Drawloom almost ready for weaving! Process pics.

May you take a bold step into the new year.

In with the new,
Karen

Looms Quietly Waiting

December 24, 2019December 23, 2019 Karen

Merry Christmas Eve to you. Looms are quietly waiting to resume their rhythm. Meanwhile, songs of joy and hope fill the air because the Savior of the world is born.

Pictorial tapestry on Glimakra Standard loom. Only 6 cm remaining. — **1. The Standard**
Pictorial tapestry, with only 6 centimeters of the cartoon remaining.

Rosepath rag rug completed on the Glimakra Ideal loom. — **2. The Ideal**
Second rosepath rag rug completed. Two short rugs yet to be woven on this warp.

Wool handwoven scarves. — **3. The Little Loom**
First of two scarves is started. I am using the *Stardust* draft by Mona Nielsen, published in *Happy Weaving*, from Vävmagasinet, but with yarn and colors of my choosing.

Drawloom getting set up for weaving rag rugs with single unit drawloom. — **4. The Drawloom**
Warp is threaded and tied-on. Single-unit draw cords have been prepared. Next step: Attaching draw cords to pattern units. And then, tie up treadles and start weaving!

May your night be silent and holy, calm and bright.

Happy Holy-days,
Karen

Imagine Rag Rugs on the Drawloom

December 3, 2019December 2, 2019 Karen

Rag rug weaving on the drawloom! I can only imagine the delight. In the meantime, the drawloom is getting dressed. It takes time to group the pattern heddles into units, add lingos, thread pattern shafts, thread eight ground shafts, sley the reed, move the ground shafts and pattern shafts to their positions, and tie on. After I finish all that I can think about adding all the single-unit draw cords and finish tying up. Whew!

Winding a warp for the next drawloom project. — Warping reel is in a corner of the drawloom studio. When not in use, the reel is folded up and pushed against the wall.

Warp chains of 12/6 cotton rug warp. Drawloom rag rugs! — Warp chains of 12/6 cotton rug warp.

Drawloom - rug warp is ready for threading. — Warp is beamed and ready for threading.

I became acquainted with the single-unit drawloom at Joanne Hall’s studio (see Drawlooms in Montana), but this is my first go at it on the drawloom in my studio. Because of the reward that awaits, I will gladly tackle all the tasks of dressing this loom. Weaving rag rugs on a drawloom will be phenomenal!

Pattern heddles and weights for prepping the drawloom. — Pattern heddles are hanging on the breast beam for grouping into pattern units. A lingo is hung on each unit.

Threading the drawloom. — Pattern heddles have been threaded. You can see the lingos hanging below. Ground heddles are now being threaded. Straight draw threading on eight ground shafts.

Joy sees hidden treasure. We go to great lengths to unearth high-value treasure. Jesus did this, seeing us as the reward. That’s what Christmas celebrates. Jesus left his splendor in heaven to come to earth as a baby. He entered this world and endured the worst because of the joy set before him. He did it all for the joy of having us in fellowship with God. We come to him and find that we are the Grand Weaver’s reward.

May your joy be full.

Joy to you,
Karen

Process Review: Drawloom Jewels

September 24, 2019September 23, 2019 Karen

It is exciting when Maverick walks by. Although he never comes in my drawloom studio, he does stop for a moment to look my way. You’ll see him in the slideshow video below. But what happens inside the studio is even more exciting, especially when it’s time for cutting off!

Drawloom with 16 pattern shafts. — Drawloom, set up with sixteen pattern shafts. I graph out the designs in Excel on my computer. Then, I print out the gridded pattern to use at the loom. I keep my place in the pattern with a magnet and magnet board made for cross-stitch embroidery.

This is Tuna wool, so I expect some shrinkage, but how much? I take careful measurements before and after wet finishing. Besides the main piece of fabric that I’m using for a garment, I have two sample pieces. I can experiment with the samples before wet finishing my garment fabric.

Here are my findings:
Sample 1. Hand wash and air dry.

10% shrinkage in width; 13% shrinkage in length.

Sample 2. Machine wash (3 minutes agitation on a gentle cycle, with a short spin) and machine dry (low setting) till damp, finish with air drying.

13% shrinkage in width; 14% shrinkage in length.

~How to do the shrinkage calculations~
First measurement (on the loom) minus the second measurement (after washing and drying) equals the difference. The difference divided by the first measurement equals the percentage difference.
For example, 50 cm – 43.5 cm = 6.5; 6.5 / 50 = 0.13; 13% shrinkage.

The first sample fabric is softer than the unwashed fabric, but not as soft as I’d like. The second sample fabric is beautifully soft, like a nice warm sweater. So, with confidence, I wet finish the garment fabric—with great results. It’s perfect for the fall/winter vest that I’ll soon be wearing, made from this fabric!

Wool garment fabric from a drawloom. — Like a sweater, this soft fabric will be comfortable to wear.

Making a pattern for handwoven garment fabric. — Muslin pattern for a simple vest. First, I’ll make a vest out of a wool throw, woven on my rigid heddle loom ages ago. Then, I will cut into the new drawloom fabric, with confidence about the fit.

Enjoy this photo show of the drawloom process.

May you enjoy the process you’re in.

Happy Weaving,
Karen

Tried and True: Five Reasons Sampling Makes Sense

August 13, 2019August 5, 2019 Karen

Why sample? It means using more warp and weft. And it means waiting longer to start to the “real” project. What do I gain from it, anyway? Is it a waste of resources and time?

I can’t imagine putting on a warp that didn’t have room up front for sampling. There’s more than one reason to put on sufficient warp to weave a sample. It makes perfect sense, especially if there is anything new or unfamiliar about your planned project.

Five Reasons to Add Extra Warp for Sampling

Drawloom — Sampling to test patterns, weft colors, and beat consistency, before starting on fabric for a garment.

1 Space to play. I want plenty of room to play, and to practice techniques that are new to me.
2 Room to try out designs. By weaving a portion of my designs, I am able to determine what works, and what adjustments need to be made.
3 Warp for testing weft colors. Only when woven can I see the full effect of each potential weft color.
4 Time to gain a consistent beat. When I start the main project, I want to have woven enough to be able to “feel” how firmly or softly I need to move the beater.
5 The best reason of all! It’s always good to have enough warp on the loom that you can invite friends and family to enjoy some weaving time. …Before your main project is in progress.

Drawloom, making garment fabric. — Garment fabric. This is to be used for two side panels of a vest I plan to make for myself.

May you give yourself room to play.

Yours truly,
Karen