Tag: cotton

Not the Easiest Way to Weave

Karen

I considered making a matching set, but at the loom I get an inclination to explore. Hence, no two placemats are alike. A change in the weft changes everything. New colors emerge! Slate and apple green on a coral warp become periwinkle and avocado. If you look closely, though, you can still see the underlying coral and camel stripes of the warp.

Cotton placemats on the loom with color and weave effects.
Second placemat uses red and orange in the weft. These colors work with the coral in the warp to bring out a distinctive color-and-weave effect in the design.

Three double-bobbin shuttles—this is not the easiest way to weave. I am carrying the colors up the selvedge, so it gets tricky when all three shuttles end up on the same side. Nevertheless, this is the joy of weaving a challenge. How and where to set the shuttles down, and which hand picks them up—ever aiming for efficiency. Newly-formed colors and technical pursuits—this is a handweaver’s thrill of discovery!

Three double bobbin shuttles for this color and weave placemat.
Beginning of the third placemat shows variation in pattern and color choices. Three double bobbin shuttles put my manual dexterity to the test.
Color and weave variations.
Coral and camel warp stripes form the base of the design. Pattern variations are produced by varying the number of picks per weft color.

Imagine the thrill of discovery that awaits us in heaven! Love permeates heaven. Like a narrow-striped warp, love is written into the fabric. The environment there is love, where pride and selfishness don’t exist. Blending of colorful personalities will be such as we’ve never seen. All to the glory of our Grand Weaver. And how marvelous that through Christ we’ve been given everything needed to practice that kind of love here and now. Double bobbin shuttles, and all.

May you rise to the challenge.

Love,
Karen

Heddle Shortage

Karen

I am well into threading when I realize I neglected to take into account how many heddles I need for this project! I don’t have 2,064 even if I grab all of the heddles from the other loom. This double weave throw project is at a dead end until more heddles appear. I hurriedly place an order for more heddles…

Threading heddles for double weave.
This Glimåkra Standard is one of three looms that share my supply of Texsolv heddles.

Thankfully, the new heddles arrive quickly and the project is alive again.

This is what 1,000 Texsolv heddles looks like!
This is what 1,000 Texsolv heddles looks like! I didn’t want to run out again any time soon.
New Texsolv heddles - 1,000 of them!
Heddles come in bundles of 100, held together with twist ties. WARNING: DO NOT undo the twist ties before you put the heddles on the shaft bars. You’ll be sorry…
Clipping loops on new Texsolv heddles.
Before putting the heddles on the shaft bars, and while they are still tied into bundles, clip the loops at each end.
Clipping Texsolv heddle loops.
I clip the loops on both ends of the heddles. It is easy to move heddles wherever you want if the loops are cut, including repositioning individual heddles. (It is far easier to clip the loops while the heddles are still tied together.)
New heddles on the shaft bars.
There are 100 new heddles on each shaft. The heddles that are not used will be tied up and put away in my heddle box, ready for the next time I need more heddles.

Alive. This is the Easter season when we celebrate the resurrection of Jesus Christ. He died, and was made alive again! What makes it even more fantastic is what that means for us. We all have a goodness shortage. And without a source of true goodness, our lifetime self-improvement project is at a dead end. Yet, through faith in the powerful working of God, we are raised with Christ. We are made alive together with him. His true goodness becomes our living source.

New bundles of Texsolv heddles stand ready to be used!
Threading progresses. New bundles of heddles stand ready to be used!

May you be supplied with more than enough.

Happy Easter,
Karen

Halfway Milestone

Karen

Halfway is a milestone when you are threading 2,064 ends. This double weave in two blocks has threading such that I can listen to podcasts without losing my place. It’s a long stretch to the halfway point.

Threading heddles, from right to left.
Threading heddles, going from right to left.

Before threading, I find the center of the warp and the group of ends that are just past center. I drape those ends on the back beam to mark the spot.

Threading 2064 ends. Halfway point is identified.
Center of the warp is identified. The ends just left of center mark the spot.
Threading heddles in my "playhouse" in the loom.
Sitting in my playhouse to thread the heddles. No hurry.

I’m excited to reach halfway in the threading! It’s a turning point. Now, while they are readily accessible, I position all of the shaft-to-lamm cords to hang down, right at the center of the warp where they belong.

Halfway finished threading heddles! Only 1,032 to go. :)
Half of the threading work is done! Only 1,032 ends to go. 🙂
Cords aligned at the center of the warp.
Center of the warp. Good time to align the cords that go from the lower shaft bars to the upper lamms.
Threading heddles for double weave on a Glimakra Standard loom.
Threading for the double weave throw continues, a few minutes here, an hour there, until all the ends are in heddles.

Have you ever reached a turning point in life, and knew it was time to position things? We try to be good and loving. But we’re never as good as we think. And we end up loving only the people we want to love. We have been separated from God. Our misdeeds push us away from him. Easter is resurrection, but before that is the cross of Christ. God so loved us that he closed the separation between us and him with the cross. That’s the turning point he offers to us, to set things right. Our part is to believe.

May you look forward to the second half.

With you,
Karen

Tools Day: Swedish Bobbin Winder

Karen

There’s nothing quite like the beauty and functionality of a well-designed tool. The Swedish hand bobbin winder is one of those tools. A bobbin winder is essential. Steve made a superb electric bobbin winder for me that I normally use. But at our Texas hill country home, my Swedish bobbin winder comes into play. And it is a pleasure to use. I clamp the bobbin winder on a shelf in the cabinet where I store my few weaving supplies for this location. The tube of thread sits directly below on a simple homemade spool holder.

Swedish hand bobbin winder for winding quills.
Swedish hand bobbin winder is set up in my supply cabinet. It is easy to remove and put away when I finish winding quills.
Swedish hand bobbin winder for winding quills.
Narrow spindle on the bobbin winder is the size that works for winding quills.

For these color-and-weave cotton placemats, I am using double-bobbin shuttles. So, with the impressively simple Swedish hand bobbin winder I am winding matching pairs of colorful 8/2 cotton quills.

Double-bobbin shuttles for weaving doubled weft.
Double bobbin shuttles are handy for weaving this doubled weft color-and-weave pattern.

May you have the pleasure of working with well-designed tools.

Happy weaving,
Karen

Transferring Warp Ends Takes Courage

Karen

There are four pairs of overlapping warp chains, with stripes to line up. I created a mess. A few options to consider: 1. Give up. 2. Weave it as is, destroying the design. 3. Use two sets of lease sticks, and expect problems with threading (2,064 ends). 4. Transfer all ends to a single set of lease sticks, arranging threads in order for each stripe.

Eight warp chains...to correct a huge winding error.
Each of four warp chains were duplicated when I realized I had wound only half the correct number of ends in each chain.

Option 4 seems the riskiest. If I lose the cross while transferring threads, I have an even bigger mess. It’s all or nothing. Go for it! Fortunately, my apprentice, Juliana, arrives in the nick of time to give me a hand.

Transferring color stripes to one set of lease sticks.
Lease cross is tied separately for each color “partial” stripe.
Transferring two warp chains to a single set of lease sticks.
Stripes from the two warp chains are transferred to a single set of lease sticks. Now the stripe colors are at their full correct width.
Preparing to transfer warp ends.
For the four center warp chains, each section of color is separated and tied at the cross. It takes an extra set of hands to transfer them in order to the primary set of lease sticks.
Delicate transfer of warp ends accomplished!
All warp ends are now successfully transferred to a single set of lease sticks. Let the loom dressing begin!

It worked! All the threads are successfully transferred to one pair of lease sticks. What a relief! I can beam the warp knowing that all is well. A beautiful double weave throw is imminent.

Pre-sleying the reed at the loom.
Warp is pre-sleyed at the loom. So far, so good.
Double weave warp ready to beam!
Ready to beam! Looking forward to this dressing and weaving experience.

We all have made a mess of our lives, and we know it. We hear of options to fix things, but one seems the riskiest: Transfer everything to God. But what if I mess that up, too? There’s good news. God transfers us. When we place our trust in Jesus Christ, God transfers us from our messy state to his good order. And the result is a weaving that showcases his workmanship—a beautiful you.

May you take a worthy risk.

With you,
Karen