At the risk of telling you something you already know, I am going to show two ways I use rubber bands in my weaving studio. Yes, rubber bands. Simple, to the point of being simplistic. But I sheepishly admit, I didn’t know to do these things until I saw someone else do them; and then I expanded (pun intended) their practices to suit the way I like to work.
1. While it is common to put a rubber band on one treadle to act as a marker for your feet, I find it helpful to put rubber bands on two treadles for even greater efficiency. I put one rubber band on the first pattern treadle, and a second rubber band on the third pattern treadle. My feet never have to guess where to step. (With the rosepathtie-up for the rag rugs on the Glimakra Ideal loom, there are two plain weave treadles on the right, and then four pattern treadles. The rya weaving on the Glimakra Standard loom has one treadle on the right that lifts the warpends for the rya knots, and four pattern treadles.)
Plain weave, like the solid blue section, and the band of brown, uses the two treadles on the right on this Glimakra Ideal loom. The rosepath pattern, in orchid, and the dots and dashes, in dark pink and blue/black, uses the remaining four treadles.Five treadles are used for this rya weaving on the Glimakra Standard loom. The treadle on the right lifts the warpends on the second shaft, onto which the rya strands are tied. The remaining four treadles are used to weave a rosepath pattern in the cloth.
2. Rubber band the thread label around the tube of thread. This is the simplest way to keep track of fiber information–fiber content, weight, color number, brand. I also cut a short length of the thread and stick it to the sticky side of the label. This helps me get the labels back on the correct tubes, especially when using several threads of different colors.
With similar colors, like these two tubes of 12/6 cotton rug warp, it helps to keep an identifying strand attached to the label. I always try to put the label back on its tube as soon as possible to prevent mix-ups.
May you find simple solutions to do what you do better.
My feet follow an eight-step sequence on four treadles for this rosepath pattern. Even one step out of sequence makes a glaring error. I start out conscious of the order, repeating the numbers aloud while moving my feet. 3-2-1-4-1-2-3-4. After a while, my feet find a motor memory and I don’t need to concentrate as much. Now I’m in my sweet spot, throwing the shuttle back and forth, making cloth. (This flat cloth will be the back of a cushion with THIS rya weaving on the front.) I would like my attitudes to stay in their sweet spot, too.
If I always stop at the same spot in the eight-step sequence, when I do need to stop, I am much less likely to get confused about where I left off. I like to have a filled quill ready so I can keep moving, even when I need to replace an empty quill.
There are normal interruptions in weaving, like stopping to replace the quill in the shuttle. Most of my treadling errors happen after those interruptions. With my attitudes, the disruption that knocks me out of my sweet spot is an encounter with someone who is disagreeable, rude, or unkind.
When we give a blessing, though, even to the undeserving, we come out ahead. If I show empathy, kindness, and humility to someone who does not show it in return, I end up with the blessing. If I return evil for evil or insult for insult, however, I throw that blessing away and my misstep makes a glaring error in my own fabric. Giving a blessing is the best way to get back to that sweet spot.
Finish the finishing, please. I always have a pile of handwovens that need finishing. Don’t you? The finishing smorgasbord includes repairing skipped threads (unintentional floats), securing ends, fringe treatments, hemming, wet finishing, pressing, adding hanging tabs, embellishments, and more. You know you are finally finished when your handiwork is being used and enjoyed.
1. Twisted fringe on bamboo huck lace small tablecloth. This cloth covered an heirloom table, becoming the altar, at Melody’s wedding. (This short piece was at the end of the warp after weaving two shawls.) You can see the shawls HERE, and twisting the fringe HERE.
Twisted fringe gives an elegant finishing touch to this small huck lace table covering.
2. Added hanging tabs to handtowels. Installed Ikea rod with basket and hooks to hang handwoven handtowels in the powder room. (When you need tabs for towels, it helps to have a collection of inkle and band loombands.) You can see the most recent towels HERE – I kept one of the eight for myself; the rest became gifts.
Ikea basket and hooks hold assortment of handwoven towels for guests to use in the powder room.
3. Untangled the fringe of alpaca/tencel throw. (A wet finishing nightmare I don’t care to repeat.) You can see what it looked like before washing HERE.
Each strand of fringe was carefully separated one-by-one after leaving the alpaca/tencel throw in the washing machine a few minutes too long. Untangling took longer than tying the lattice fringe. Hours and hours.
4. Hand-stitched rolled hem on Swedish lace tablecloth. (I may use this as a curtain for my weaving studio window, hung on rings with clips, on a rod.) HERE are the long curtain panels that hang on windows in my home.
Swedish lace panel can be used as a tablecloth, or a curtain, or even a light, summery shawl. The hand-stitched rolled hem gives a delicate touch to this elegant piece.Swedish lace is shown to its best advantage when light is allowed to shine through the cloth. The pressed rolled hem adds a classy touch.
5. Hemmed small sample piece to carry around with me when I have a cup of coffee. (I grab this re-usable “scrap” instead of a paper napkin or paper towel. It also doubles as a coaster wherever I happen to sit down.) The original M’s and O’s towels are HERE; and HERE you can see what I mean about carrying my coffee cup around with me.
Scrap of handwoven fabric, from a cottolin warp of handtowels, follows my favorite coffee cup around.
6. Replaced nylon cord on handwoven Roman shades with a cord I wove on my band loom. (The “temporary” nylon cord stayed more than a year. We now enjoy seeing this on our kitchen door every day, finally fully finished.) The only place I have a picture of the original nylon cord, and of the fabric on the loom for the Roman shades is in my Projects on Weavolution HERE. (I’m not sure if you can see it without logging in to the site.)
Linen and cotton threads that match the handwoven Roman shades were used to weave the pull cord. Cord woven on Glimakra two-treadle band loom.Handwoven Roman shades finally have a matching pull cord. When the shades are lowered at night, the two-block twill structure is seen covering the whole kitchen door window. Woven on 8-shaft Glimakra Standard loom.Opening the shades to start the day and welcome you. Please come in!
May you reduce your finishing pile (I know you have one).
You might think this looks like a mess. Maybe there is a vague sense of pattern and color, but doesn’t it look like the assortment of rya knots are in a random arrangement? Guess again. Let me give you another view.
Each colored wool strand is knotted by hand around doubled warpends. Mora wool is doubled on the quill in the shuttle for the background weft, woven in a rosepath pattern.
Change the perspective of the camera, and you will see the simple, but distinct, pattern and order that is woven into this design.
A simple stripe arrangement enhances the layered look of rya knots. The row of reds and violets is repeated to give prominence to that color family.
We think we are able to know all there is to know, but that’s just not true. We see from a human perspective. Is it possible that there is more than science, education, and philosophy can explain? God is greater than we think. His view of his creation is from a higher angle. He knows what he made and how he designed things to operate. We study and discover how it all works, but we didn’t make it. Our grand weaver is great. No one knows how great he is. But when things look like a pretty mess, we can trust he has a plan that will weave the assorted threads into a beautiful work of art.
May you see beauty even when things seem to be a mess.
In a pretty mess with wedding plans (only two weeks to go!), Karen
One at a time. Like anything else, you do get faster as you get the hang of it. I select and arrange the colors for the upcoming row, and then I settle into a rhythm. With my right foot pressing the treadle, I use both hands to manipulate both the raised warpends and the loose wool strands. It is a relaxing and satisfying trek from the right-hand side of the warp to the left, one rya knot at a time.
I am letting the pictures speak for themselves. I forgot to take a picture of the completed rya knot pillow top square while it was still in view on top, so you get to crawl under the breast beam with me at the end to see it from underneath.
