Double Weave Throw – Take Two

Karen

Nothing about the original draft is incorrect, but when I wrote it in pencil on my planning sheet, I transposed one. little. thing. The threading key. “X = plum; black square = other colors.” Exact opposite of what is written in the draft from The Big Book of Weaving, by Laila Lundell. (See When You Misread the Threading Draft, where I discover my dilemma.)

One little mistake. Big consequences.
Blind to my own mistake, even as I double check my handwritten draft.

Thanks to Fiberworks weaving software I am working out a solution. I adjusted the tie-up, so the treadle tie-ups on the first, third, fifth, and seventh shafts trade places with the tie-ups on the second, fourth, sixth, and eighth shafts. It works. And now, the one little threading error that is clearly visible seems like a breeze to correct!

Ready to weave a cotton double weave throw.
Tie-up adjustments bring the correct warp ends to the surface. Solid stripes of color are set to produce the desired design when woven.
One threading error. No big deal at this point.
One blue warp end stands out like a sore thumb. I’m glad to find this one threading error at this stage in the process.

There are times when my whole perspective needs an adjustment. It’s time for love. Love adjusts our view. At the heart level, love brings about changes in us. It re-sets our attention and motivations. Because God loved us, we can love, too. We don’t see, understand, or know everything now, which shows how incomplete we humans are. But the love that heaven knows is something we get to participate in here and now. Our cloth is far from perfected, but our love adjustments give us a glimpse of cloth from another realm.

May you make necessary adjustments.

Love,
Karen

When You Misread the Threading Draft

Karen

What if you finish tying up the loom, eight shafts and eight treadles, having beamed, threaded, and sleyed 2,064 ends, and the first thing you see when you step on the treadles is… that you misunderstood the threading draft? Do you undo everything and re-thread? Not likely, if it took you eleven-and-a-half hours to do the threading in the first place. I am taking a deep breath. Time to walk away and think. Maybe I can adjust the tie-up, or maybe I can use it as is—a serendipitous design. Should I laugh or cry? My idea to serve my loved ones with handwoven gifts (See Weaving a Gift) is getting off to a rough start.

Double weave throw. Warp is tied on.
Warp is tied on. Ready to tie up the treadles.
Tie-up completed for eight shafts and eight treadles.
Lamms are connected. Treadle cords are positioned. Treadles are tied up. Eight shafts and eight treadles.
Double weave throw.
This view should show solid dark plum all the way across.
Double weave throw on the loom.
This view should show stripes of solid colors, not two-color stripes, with solid bands of dark plum in between.

Serve. I want to offer my best, especially when I’m making a gift for someone dear to me. It helps to look beyond the person, though, and realize my true service is to the Lord. Heart, soul, mind, and hands. I bring my misunderstandings and missteps of the heart to my Master Weaver, who has taken it on himself to make things right. And I’m reminded that as I serve someone with my weaving hands, the true gift is love. This double weave throw will be a reminder of that.

May you recover from your mistakes.

Humbly,
Karen

UPDATE: I have had a chance to put the draft on Fiberworks weaving software and work with it to adjust the tie-up. I think I found a solution. Stay tuned!

Tools Day: Measure Once

Karen

It occurs to me that I am unnecessarily doing something the hard way. Repeatedly. For every new project, I pull out my tape measure to find the right set of lease sticks. The tape measure also helps me select the temple needed for the current weaving width. No more! I do like my tape measure, but why am I measuring these things every time? Why not measure them once and label them?

Solution

  • Measure the lease sticks and write the length in centimeters and in inches on one stick of each pair, in pencil.
  • Use a wood burner to trace the pencil markings. (My husband Steve does this part for me.)
Weaving tip: Measurements on lease sticks.
Wood burner is used to write the length measurement on the end of a lease stick. Centimeters and inches are indicated because I use metric or imperial units, depending on the project.
  • Thread a cord through one end of each pair of lease sticks, to keep pairs together. Hang the lease stick pairs with the measurements clearly visible.
Weaving tip: Measured lease sticks paired together for hanging.
Looped cord is threaded through the lease stick holes to provide an easy way to hang pairs together.
Paired lease sticks, ready for hanging.
Paired lease sticks, ready for hanging.
Lease sticks hanging in the weaving studio.
Pairs of lease sticks hang beside my worktable in my weaving room. My ol’ Beka rigid heddle loom on the wall happens to provide just the right little hanging post for the measured lease sticks.
  • Look up the temple sizes on a website that sells them, and write the size range in centimeters and in inches on each temple, in pencil.
  • Use a wood burner to trace the pencil markings. (Steve, again.)
Weaving tip: Measure the temples.
Range of temple widths is important information when I’m choosing a temple. Weaving width of a project must fit in that range.
  • Store the temples in a manner in which the marked measurements are easily seen.
Weaving tip: Find the right temple size the first try!
No more trying different temples to find one that fits. Now I can look at the markings and select the correct temple the first time.

Now I have permanent at-a-glance measurements for each of these frequently-used tools!

May you find something to simplify.

Happy weaving,
Karen

Thousands of Threads

Karen

Finally! Every warp end is in a heddle, where it needs to be for double-weave cloth to happen. I don’t mind the time it takes. The process of dressing the loom is fascinating. And I hope I will always see it that way. I’m thankful that I get to weave.

Threading complete! 2,064 ends for a double weave throw.
Threading complete! 2,064 ends in that many heddles, at about 3 ends per minute. But who’s counting?

And now, onward to sleying the reed!

Sleying the reed. 4 ends per dent.
Reed is sleyed at 4 ends per dent in a 50/10 metric reed (equivalent to a 12-dent reed, imperial), at about 12 ends per minute, which feels pretty fast at the moment.

Thanks. It’s something we give. Heartfelt thanks is a ready gift that costs us nothing to give. Gratitude leads us to see blessings in the ordinary, and opportunities in the routines of life. When we abound in giving thanks, letting it spring up from a satisfied soul, we bring life to our family and our community. An abundance of thanks to God lifts our eyes to a view from above. It’s there that we see all those threads, thousands of them, working together to become a glorious cloth for our good. That’s reason to give thanks.

Thankful for friends like you,
Karen

Not the Easiest Way to Weave

Karen

I considered making a matching set, but at the loom I get an inclination to explore. Hence, no two placemats are alike. A change in the weft changes everything. New colors emerge! Slate and apple green on a coral warp become periwinkle and avocado. If you look closely, though, you can still see the underlying coral and camel stripes of the warp.

Cotton placemats on the loom with color and weave effects.
Second placemat uses red and orange in the weft. These colors work with the coral in the warp to bring out a distinctive color-and-weave effect in the design.

Three double-bobbin shuttles—this is not the easiest way to weave. I am carrying the colors up the selvedge, so it gets tricky when all three shuttles end up on the same side. Nevertheless, this is the joy of weaving a challenge. How and where to set the shuttles down, and which hand picks them up—ever aiming for efficiency. Newly-formed colors and technical pursuits—this is a handweaver’s thrill of discovery!

Three double bobbin shuttles for this color and weave placemat.
Beginning of the third placemat shows variation in pattern and color choices. Three double bobbin shuttles put my manual dexterity to the test.
Color and weave variations.
Coral and camel warp stripes form the base of the design. Pattern variations are produced by varying the number of picks per weft color.

Imagine the thrill of discovery that awaits us in heaven! Love permeates heaven. Like a narrow-striped warp, love is written into the fabric. The environment there is love, where pride and selfishness don’t exist. Blending of colorful personalities will be such as we’ve never seen. All to the glory of our Grand Weaver. And how marvelous that through Christ we’ve been given everything needed to practice that kind of love here and now. Double bobbin shuttles, and all.

May you rise to the challenge.

Love,
Karen