The countermarch loom is known for having a clean shed, so that is my goal. Is that possible for ten shafts and ten treadles? The first treadle I step on reveals that treadle cord adjustments are definitely needed!
Before making any adjustments, a few of the sheds look impassable, like this one.
I learned the basics of making adjustments to treadle cords from Learning to Warp Your Loom, by Joanne Hall, and The Big Book of Weaving, by Laila Lundell. I also gained valuable experience from Vävstuga Basics, with Becky Ashenden.
Here’s how the process looks for me, with this ten-shaft, ten-treadle project as an example.
I keep the following note on my iPhone. It helps me remember how things work.
I fill in the blanks for each treadle, noting which shafts are too high or too low. Then, using my iPhone note for reference, I make the needed adjustments.
The first time through, I am primarily interested in the bottom of the shed. I make adjustments to clear the shed enough to be able to weave a little bit.
Weave an inch or two. It is surprising how the shed cleans up with a little bit of weaving.
Bottom of the shed has threads on one or two shafts that need to be lowered. After making those adjustments, this treadle will have a clean shed for weaving.
After weaving that first inch or so, I go through a second, and a third time, if needed, to get a clean shed on each treadle. Adjustments for the top of the shed are only needed if there are threads that will interfere with the shuttle.
No hindrance for the shuttle here. This is the kind of shed I hope to see on every treadle.
When I first see a messy shed, I think, “How will I ever get my shuttle through that?” But it turns out to be little adjustments here and there. It’s not too difficult if you understand the loom.
After all treadle adjustments have been made, the shuttle glides freely through the shed. And pick by pick, linen threads become cloth.
Nothing is too difficult for the one who made heaven and earth. Our Creator knows how to help us. He hears our prayers for help, and little by little, we see what He is doing as the shed clears and the shuttle glides through, unhindered.
When my long-held dream of weaving on a floor loom became a possibility, I started my journey with questions. What are the pros and cons of the different types of looms? After considerable research, a winner emerged—the Swedish countermarch loom!
Pros and Con of Countermarch Looms (My experience is with Glimåkra. Other countermarch looms may differ.)
Pros
Weave anything. Rag rugs to lace-weight fabric.
Hanging beater. Swinging beater has momentum that enables a firm beat. No strain to shoulders, arms, or wrists. Asset for weaving rag rugs, and superb control for cloth with an open weave. Beater placement is adjustable, making it possible to weave longer before advancing the warp.
Rear-hinged treadles. Pressing treadles is effortless, no matter how many shafts. No strain on back, legs, knees, or ankles, even with robust weaving. Because treadles are close to each other, I press correct treadles with sock- or bare-footed ease…without having to watch my feet. Ample foot rest makes it easy to trade feet when using many treadles.
Clean shed. Stepping on a treadle raises and lowers shafts at the same time, so a great shed is not only possible, but usual.
Glimåkra Ideal with horizontal countermarch. The cords from the countermarch jacks at the top of the loom go straight down through the warp to the lower lamms. The lower lamms connected to treadles cause shafts to lift when a treadle is depressed.
Even warp tension. Because shafts are both raised and lowered, tension is equal on raised and lowered warp ends. Even warp tension is good for all types of weaving. This even tension makes a tight warp possible. Perfect for linen, and for rugs.
Gimåkra Standard loom with vertical countermarch. Cords from the countermarch jacks go over the side of the loom to the lower lamms below. The upper lamms (not pictured) attached to treadles cause shafts to sink when a treadle is depressed.
Threading and sleying ease. Loom bench sits “inside” the Glimåkra Standard loom, comfortably close to heddles and lease sticks for threading and for sleying the reed.
Bench sits in the loom for threadingheddles. I call this my little playhouse.
Texsolv heddles. Heddles can be easily added or removed from shafts (shafts are also easily added or removed). Quiet. Easy to thread.
Perfect fit. A petite person like me can weave on a large loom (my Standard is 47”/120cm) as comfortably as someone with longer arms and legs. Able to sit in upright posture for weaving.
Wooden. The loom is primarily wood. Bonus if you appreciate natural beauty of wood. Held together with wooden wedges and a few bolts. No screws or wing nuts.
Scandinavian clarity. Because of the Swedish loom, I adopt Swedish weaving practices and have an interest in traditional Scandinavian textiles. The loom fits the style. Streamlined design, precision, systematic and logical processes, and beauty with function.
Con
Treadle tie-ups. Shafts are connected to upper lamms and lower lamms. Treadle cords with a bead at one end are hung in the lamms. Lamms are then attached to treadles. Treadle tie-ups normally fall under the Pros category, because this is what enables the loom to have the clean shed it’s known for. But since I just finished tying up ten shafts to ten treadles (that’s 100 treadle cords), this is my least favorite part right now. 😉 (The weaving pleasure more than makes up for it, though.)
One hundred treadle cords hang from upper and lower lamms. The only thing left is to attach all the cords to treadles. 😉Treadle cords are attached. Little anchor pins lock each cord into position under the treadle. After a few adjustments, the shed on each treadle is good. The loom is dressed! Five-shaft satindräll coming up!
Conclusion:
When I weave on my Glimåkra Standard countermarch loom, I am soaring like an eagle. I’m sailing with the spinnaker up. I am a pipe organ maestro. I am dreaming while fully awake. This is everything I imagined weaving could be, only better.
Testing weft options. Gorgeous handcrafted damask shuttle, Chechen wood, made by Moberg Tools. Five-shaft satin dräll–a weaver’s dream.
For more in-depth information about countermarch looms, comparisons of looms, and other fantastic resources, see articles written by Joanne Hall, found at Glimåkra USA.
The color is rich, the drape is fluid, and the pattern in the lustrous cloth is eye-catching. “Kuvikas to taqueté” was not an easy project. Eight shafts, double treadling, and double-bobbin shuttles with slick 8/2 Tencel weft. But the fabric is incredible!
Thanks to a unusual tie-up, two treadles are pressed simultaneously, something I had not thought possible for a countermarch loom. I started with kuvikas (summer and winter), which has tabbypicks between the pattern picks. The dark teal 8/2 cotton tabby weft and the bright teal Tencel pattern weft produce a tone-on-tone effect for the square and stripe patterns. These two pieces will become the front and back of a throw pillow.
Kuvikas panel 1 complete. I always use red thread for a cutting line between pieces, so there is no accidental cutting in the wrong place.
I then changed the treadle tie-up to switch from kuvikas to taqueté. The taqueté has no tabby weft. The teal and cream Tencel weft threads lay back-to-back, producing a double-faced fabric. This piece is being used as a table runner.
Stripes in kuvikas, and then square pattern in taqueté after changing the treadletie-up.Finished kuvikas glistens in the sunlight.
Enjoy the little slideshow video I made for you that follows the process from three lovely aquamarine warp chains to fabric glistening in the sun on a Texas hill country table.
May you finish something that is not easy.
Happy Weaving, Karen
Do you remember my Handwoven Thick and Thin Towels (that appeared on the cover of Handwoven), and my Black and White Towels (These Sensational Towels)? I will be teaching a workshop on that thick and thin technique at Shoppes at Fleece ‘N Flax in beautiful Eureka Springs, Arkansas August 24 – 26, 2017. You’re welcome to join us! I’d love to see you there! Contact the shop at the number below if you are interested.
I need this sample section to practice being an octopus at the loom. I switched from kuvikas to taqueté. Now I am weaving with twodouble-bobbin shuttlesand two treadles at a time. With no intervening tabby treadles to balance my foot placement.
From kuvikas to taqueté. Changing the tie-up allows the loom to weave more than one structure with the same threading.
This taqueté uses the same threading as the kuvikas that preceded it. You’ve heard it said, “One change changes everything.” Try changing the tie-up. Everything changes. Treadling sequence, weft arrangement, and picks per inch. I’m struggling like a beginner with this double treadling, double double-bobbin shuttling. But I’m not quitting, because look what it weaves! The cloth is amazing.
With no tabbypicks in between, the double-bobbin shuttles take turns with each other.Each pattern block uses two treadles, pressed simultaneously. The treadling sequence changes four times for each complete row of pattern. Each block (a third) of the square-within-a-square pattern has five complete pattern rows.
One life change, good or bad, can bring a struggle. We try to move forward like we did before, but now it’s not working. Too many things are shifting at once. One thing changed, and now we are searching for sound footing. God is present even in our struggles. The warp is the same, the threading hasn’t changed, and the Grand Weaver is still at his loom. God is a very present help in trouble. God is now and near. Right now, right here. And then we get a glimpse of the cloth he is weaving… It is amazing!
Cooks have recipes, builders have blueprints, and handweavers have weaving drafts. There are a few different formats, but all drafts carry the same essential information. There is the tie-up box, the threading pattern, and the treadling sequence. Finally, there’s the drawdown, a graphic representation of how all the threads intersect.
The two formats I see most often are the typical American draft (e.g., Handwoven), and the Swedish draft (e.g., VÄV Magasinet). Many American drafts assume jack looms; whereas, Swedish drafts usually assume counterbalance or countermarch looms. However, any loom can weave from any draft.
As Madelyn van der Hoogt says in The Complete Book of Drafting, “Any tie-up can be used for any type of loom. Discover from the tie-up which shafts must be up and which down for each shed, and do to the loom whatever is required to get them there.”
All the draft formats have this in common: The tie-up box is the starting point. The threading pattern and treadling sequence begin at that point, and go out from there.
The Swedish draft makes perfect sense (remember, of course, I weave on Swedish countermarch looms). I picture the draft as if it is lying flat in front of me.
Becky Ashenden says in the forward to Weave Structures the Swedish Way, “With this orientation of tie-up, treadling, and threading, the draft has a direct relationship to the weaving of the fabric. The tie-up’s location in the lower right-hand corner of the draft allows all other information to match as closely as possible the physical aspects of the loom.”
Here is a comparison of the Swedish and American draft formats:
Tie-up is in upper right corner, and uses numerals to designate shafts that rise / white squares for shafts that sink
Threading is above the drawdown
Shafts are numbered from front of loom to the back, with the first shaft the closest to the weaver seated at the loom
Treadling sequence is on the right, and reads from top to bottom
Treadles are numbered from left to right
For a “sinking shed” loom (countermarch or counterbalance loom), use the white squares to tie up sinking shafts
For a “rising shed loom” (jack loom), use the squares with numerals to tie up rising shafts
Similarities between Swedish and American Drafts
Threading reads right to left
Squares in the tie-up box represent treadle cords that attach treadles to corresponding shafts
Draft is hanging at the corner of the loom. The fabric logically grows in the same direction as the sequence of weft picks as seen on the treadling draft.
Resources
Getzmann, Ulla, and Becky Ashenden. Weave Structures the Swedish Way. Shelburne, MA: Väv Stuga Press, 2006.
Hoogt, Madelyn Van der. The Complete Book of Drafting for Handweavers. Coupeville, WA: Shuttle-Craft Books, 1993.
