There are two questions I hear most often. 1.How long did it take?2.What is it going to be? These are hard questions to answer. I admit that I stumble around to find satisfying answers. 1. How long? Hours and hours. 2. Cloth. It is going to be cloth. What will the cloth be used for? I don’t know. But when I need a little something with a pretty design, I’ll know where to find it. There are two finished pieces, though, from this first drawloomwarp: the Heart-Shaped Baskets table runner (adapted from a pattern in Damask and Opphämta, by Lillemor Johansson), and a small opphämta table topper that I designed on the loom. The rest are samplers, experiments, tests, and just plain fun making-of-cloth. Oh, and I wondered if I could take the thrums and make a square braid…just for the fun of it.
Opphämta piece on the left, with Fårö wool pattern weft. Heart-Shaped Baskets runner on the right, with red 16/2 cotton pattern weft. Ten pattern shafts.
I will let the pictures tell the story of this first drawloom warp.
May you have plenty of things to make just for fun.
The plan to keep every loom dressed is easy when there is only one loom. Now that I have four floor looms, it’s a tough plan to follow. The drawloom—check. The Glimåkra Standard, dressed in Tuna wool—check. The two smaller looms are threaded, and just need tying on and tying up. So, I’m well on my way! The end of the first warp on the drawloom is in view, however. That means the drawloom will soon be back in the queue. And so it goes.
Winding a warp for rosepath rag rugs. 12/6 cotton. Spring colors.Warp for cottolin towels is threaded on the little hand-built loom.Opphämta on the drawloom. Pattern weft is 6/1 Fårö wool. The right side of the fabric is seen underneath, as it comes around the breast beam.Threading heddles on the Glimåkra Ideal.Blue and Almond Tuna wool warp is tied on in 1″ sections.
I like to stay a step ahead of my looms. I’m ready to wind a new warp as soon as I finish cutting off. It’s the cycle of weaving. But I have trouble staying ahead.
Twelve shafts. Twelve upper lamms. Twelve lower lamms. Twelve treadles. This is an amazing system.Warp is tied on. Ready to add the leveling string.Loom is dressed. Treadle cords are adjusted. Ready for weaving!End of warp comes near the pattern heddles. This is my first drawloom warp, so I’m waiting to see how far I can weave until I lose a good shed. So far, so good.Closing chapter of my first drawloom warp. I’ll keep “turning pages” until the shed disappears.
We have good plans for our lives. But often, it’s tough to follow those plans. Too many things happen at once, and we don’t know how to stay ahead of it all. The thing to remember is that our plans stem from our inner commitments. When we commit our ways to the Lord, trusting him, he leads us through our days. Trust turns plans into achievements. And those are the plans worth pursuing.
Eleven hours and thirty-six minutes into this project, the starting line for weaving is just around the corner. Wind the warp, and beam it. Thread the heddles. Sley the reed. Unlock the back beam ratchet. Move the countermarch to the front of the loom. … Pause when you think about moving the twelve shafts and the reed forward with the countermarch. Reach. Wiggle. Pull. Wiggle. Pull some more. Got it. Now, put the reed in the beater. Relax? Almost, but not yet.
Reed is sleyed, so reed support cords have been removed. Time to move the whole shebang forward.Plastic-coated wire is threaded through the ends of the shaft bars because I don’t have shaft pins long enough for twelve shafts. After coaxing and wiggling the mass of shafts forward, with the countermarch above them, I am ready to insert the reed into the beater.As I put the reed in the beater I make sure all of the ends are free, and not trapped in the beater’s grip.
We must not forget to center the reed. I center the reed just as soon as the reed is in the beater.
How to Center the Reed
(We are actually centering the warp that is in the reed.)
Supplies needed: Tape measure (or string)
1. Using the tape measure, measure from the right edge of the warp in the reed to the outer edge of the beater on the right-hand side. Hold the tape measure with your fingers marking the measurement.
2. Holding that measurement, place the tape measure at the left edge of the warp in the reed stretching out toward the outer edge of the beater on the left-hand side.
3. Note the difference in measurement between the right side and left side. Move the reed in the beater to center.
4. Repeat the first two steps until the measurements are the same on both sides.
Reed is centered.
Now you can relax. Enjoy the moment, because you are that much closer to seeing fabric take shape!
This is double weave on twelve shafts. One layer is the gorgeous lapis lazuli blue. The other layer is neutral almond for contrast. I am spreading and beaming this 6/2 Tuna wool warp with two sets of lease sticks—one set for each layer/color.
When you have two sets of lease sticks, though, it is a serious challenge to get the two colors to alternate correctly as you move the end loops to a separate stick. The ends on the stick are then transferred to the back tie-on bar. I did breathe a sigh of relief when everything was finally lined up and in order.
Two sets of lease sticks carries the challenge of having clear visibility of the lease cross in both warp layers. After one or two do-overs, all the yarn is successfully moved to the back tie-on bar. Moving from right to left, I separate and straighten each warp end on the tie-on bar. Only a few more left to straighten.Back tie-on bar all in order. Now ready to move the pre-sleyreed to the beater and begin beaming the warp.
And I’m reminded again how beautiful a beamed warp is. It’s worth the challenges.
That beautifully ordered wool on the back tie-on bar, now hidden from view, is an essential element for quality handwoven cloth. Kindness is that way. It’s a core trait deep in one’s character that is revealed in interactions with others. Kindness makes you beautiful. It’s not something you try to be. It’s something we wear. It’s our inner being dressed in the character of Christ.
Montana is beautiful, with snow-capped mountains and big-sky sunrises! It’s there that I took Joanne Hall’s fantastic drawloom class last week. My confidence level about setting up and weaving on my drawloom shot up 100 per cent! (And Steve got to experience fishing on the ice with Joanne’s husband Ed!) Please continue all the way to the end of this post to read about submitting a question for Joanne to answer.
View from Hall Lane, in front of Joanne and Ed’s home.
Cathleen and Deborah and I wove on the shaft drawloom, the single unit drawloom, and the Julia loom set up with half-heddle sticks to weave opphämta. What joy! …even in the challenges of learning new things.
Single unit drawloom has the capability of weaving imagery, and even words, like “Lost Valley,” the name of our Texas hill country home.Single unit drawloom in Joanne Hall’s weaving studio.Joanne demonstrates how to use half-heddle sticks and shows us some opphämta samples.Pattern has Xs that show where to pull the shaft draw handles. The red dot of a straight pin keeps my place as I follow the rows from bottom to top.Pulled pattern shaft handles are secured in the hook bar.Normally, one two-ounce U-shaped weight hangs on each pattern unit. In this case, with 6/2 Tuna wool, two weights hang on each pattern unit.Wool yardage and samplers are unrolled and cut off the 120cm Glimåkra Standard loom. Oh, the colors and patterns!
Joanne taught us how to understand patterns and drafts, and how to make our own patterns. And we dressed the drawloom—we threaded pattern heddles and ground heddles, and distributed pattern shafts. Boy, did we students make mistakes! But with quiet Joanne, there is always a way to fix anything that matters. She is a picture of grace.
Deb separates pattern heddles that will be placed on the next pattern shaft.After undoing some beginner errors, we finally have all the pattern heddles in order (pointed threading) on the eleven pattern shafts.One weight hangs on the long heddles of each six-thread pattern unit.In the loom together! Karen (me), Cathleen, and Deborah enjoy the expertise and kindness of Joanne.New 16/2 cotton warp on the shaft drawloom. I emptied a few quills to weave the traditional eight-pointed star pattern. Meanwhile, Joanne watched treadles, lamms, and shafts to fine tune the sheds. Everything is just right!
Striving to look good to other people, we face unwelcome judgment. Striving to please ourselves, we face demands of perfection. But when our heart strives to please the Lord, we receive grace. Our failures fade in importance as our confidence in his faithfulness grows. Know who you are working for. The imperfect images we weave in the cloth are a humble gift of gratitude back our Grand Weaver.
Wool shaft drawloom sampler, at home now in my drawloom studio.Reverse side of wool sampler was face up on the loom.Single unit drawloom sampler. Our Lost Valley home, with details that remind us of our 2018 transition year.Draw cords and handles are in place. Forty more will be added soon.Shaft drawloom is ready. Single unit drawloom parts will be added later. Please excuse me now while I go wind a warp!
May your imperfections be greeted with grace.
Love and grace, Karen
~What are your questions? Joanne has answers~
Are you curious about drawlooms? Are you considering a drawloom for yourself? Do you have a drawloom and wish you could ask an expert for help? Please put your question about drawlooms and/or drawloom weaving in the comments below, or send your question to me through Get in Touch. Joanne Hall’s answers to two selected questions will be included in next week’s post. Please submit your question by this Friday, February 8.
