My intention is to weave fabric for a couple of cushy throw pillows. But after just one pattern repeat, I realize that this cloth on my brand new Glimåkra Julia is something I would like to wear! No pillows this time. Instead, here is my new autumn/winter shoulder wrap, embellished with frisky swinging fringes. Miss Julia has proven her worth on four-shaftJämtlandsdräll (crackle) in 6/2 Tuna wool. Her next adventure will be something that explores all eight shafts. (See My New Glimåkra Julia Loom.)
This project starts with the draft for the Jämtlandsdräll Blanket on p.59 of Simple Weaves, by Birgitta Bengtsson Björk and Tina Ignell. Tuna yarn samples, along with Fiberworks Silver for Mac, help me jazz up the color. I settle on three colors for the warp, with burnt orange as the anchor. Six different colors are used for the pattern weft, plus dark teal for the tabby.
This is one of those times when the weaving is so satisfying that I truly don’t want the warp to come to an end. (…except that I’m excited to start on Julia’s second adventure!)
The chart that hangs at the left side of the beater gives a glimpse of the overall design of this rag rug. It’s the second page of a three-page chart. It’s not easy to make sense of the design on the loom, seeing only a small slice of the big picture. I am eager to see the whole project woven, to see how it aligns with the design I’ve imagined.
I drew the design in MacStitch, a cross-stitch design program. Then, I imported the gridded image into Photo Affinity to add vertical shaded stripes to match the 10 white-/10 black-cord arrangement of single-unitdraw cords on the loom. Lastly, I printed the enlarged chart to use as my guide at the loom.
How does our present slice of life fit into the overall plan? Only God knows. But one thing is certain. The Grand Weaver has a purpose for your life. It’s a purpose that he will fulfill. You and I are the work of his hands, work that he will not abandon. Yes, we make our plans. The truth is, our best plan is that which aligns with the design he has imagined.
My family of looms just welcomed a new little sister—Julia! This 8-shaftcountermarch is Glimåkra’s smallest floor loom. I dressed the loom right away in 6/2 Tuna wool for 4-shaft Jämtlandsdräll to try out the loom. So far, so good. An 8-shaft project using 20/2 Mora wool is up next. Would you believe this is my new portable loom? Surprisingly, the Julia fits in the back of our vehicle, without disassembling. This is the loom you can expect to see with me at future workshops.
My Julia Observations:
It goes together like you’d expect from a Glimåkra. Instructions are minimal, and quality is high. It’s a well-designed puzzle.
The assembled loom is easy to move around to gain space needed for warping, or simply to change location for any reason.
The breast beam is not removable like it is on my other Glimåkra looms, which makes it a stretch to thread the heddles from the front. However, by hanging the shaft bars from the beater cradle at the very front I can thread the heddles without back strain. (Or, if you are petite and don’t mind climbing over the side, you can put the bench in the loom for threading.)
Tying uplamms and treadles is not much different than it is for my Ideal. Everything is well within reach from the front. It helps to take the lamms off the loom to put in the treadle cords, and then put the lamms back on the loom. With one extra person available, it is entirely feasible to elevate the loom on paint cans, upside-down buckets, or a small table to make tie-ups easier, but I didn’t find it necessary to do that.
Weaving on the Julia is a delight, as it is with my other countermarch looms. Everything works. With four shafts, the sheds are impeccable.
The bench adjusts to the right height.
The hanging beater is well balanced, sturdy, and has a good solid feel. I can move the beater back several times before needing to advance the warp.
I thought the narrower treadles might prove annoying, but I’ve been able to adjust quickly. After weaving a short while, I forget about the treadle size.
Steve is the loom assembler in our family. I stand by and give a hand when needed. I hope you can feel our excitement as you watch this short video of us discovering what’s in the boxes and figuring out how it all goes together.
May you enjoy the puzzles that come to your doorstep.
I am getting ready for Christmas. When I was a little girl, my Aunt Helen made a Christmas tree skirt for our family. It was a simple white felt skirt, with added colorful felt silhouettes depicting Christ’s Nativity. I want to reproduce that Christmas tree skirt using handwoven fabric. This fabric on the Ideal loom will be the base of the skirt. I will use some of my myriad handwoven fabric remnants for the colorful Nativity appliqué.
The warp is unbleached 8/2 Möbelåtta wool. The weft is bleached 6/1 Fårö wool. The 6-shaft point twill fabric is delightful. Perfect for what I have in mind. It is peaceful, soothing, restful, and calm. You can see that everything is going to be all white.
There is a time for color, action, and noise. But we also need a time for serenity, stillness, and quiet reflection. Going alone to sit in the Lord’s presence gives us just that. It is there that we can pour out our heart in prayer. The Lord meets us where we are when we pray. And He tells the trusting heart that everything is going to be all right.
The towel that was woven without floating selvedges is the same towel that received the most votes. Towel #2!
It seems counterintuitive that weaving twill structures without floating selvedges could produce a pleasing edge. But most of the time the small floats that appear at the edge are inconsequential, especially after wet finishing. (By the way, I am weaving the white point twill mentioned above without floating selvedges, as well.)