There are two questions I hear most often. 1.How long did it take?2.What is it going to be? These are hard questions to answer. I admit that I stumble around to find satisfying answers. 1. How long? Hours and hours. 2. Cloth. It is going to be cloth. What will the cloth be used for? I don’t know. But when I need a little something with a pretty design, I’ll know where to find it. There are two finished pieces, though, from this first drawloomwarp: the Heart-Shaped Baskets table runner (adapted from a pattern in Damask and Opphämta, by Lillemor Johansson), and a small opphämta table topper that I designed on the loom. The rest are samplers, experiments, tests, and just plain fun making-of-cloth. Oh, and I wondered if I could take the thrums and make a square braid…just for the fun of it.
Opphämta piece on the left, with Fårö wool pattern weft. Heart-Shaped Baskets runner on the right, with red 16/2 cotton pattern weft. Ten pattern shafts.
I will let the pictures tell the story of this first drawloom warp.
May you have plenty of things to make just for fun.
The plan to keep every loom dressed is easy when there is only one loom. Now that I have four floor looms, it’s a tough plan to follow. The drawloom—check. The Glimåkra Standard, dressed in Tuna wool—check. The two smaller looms are threaded, and just need tying on and tying up. So, I’m well on my way! The end of the first warp on the drawloom is in view, however. That means the drawloom will soon be back in the queue. And so it goes.
Winding a warp for rosepath rag rugs. 12/6 cotton. Spring colors.Warp for cottolin towels is threaded on the little hand-built loom.Opphämta on the drawloom. Pattern weft is 6/1 Fårö wool. The right side of the fabric is seen underneath, as it comes around the breast beam.Threading heddles on the Glimåkra Ideal.Blue and Almond Tuna wool warp is tied on in 1″ sections.
I like to stay a step ahead of my looms. I’m ready to wind a new warp as soon as I finish cutting off. It’s the cycle of weaving. But I have trouble staying ahead.
Twelve shafts. Twelve upper lamms. Twelve lower lamms. Twelve treadles. This is an amazing system.Warp is tied on. Ready to add the leveling string.Loom is dressed. Treadle cords are adjusted. Ready for weaving!End of warp comes near the pattern heddles. This is my first drawloom warp, so I’m waiting to see how far I can weave until I lose a good shed. So far, so good.Closing chapter of my first drawloom warp. I’ll keep “turning pages” until the shed disappears.
We have good plans for our lives. But often, it’s tough to follow those plans. Too many things happen at once, and we don’t know how to stay ahead of it all. The thing to remember is that our plans stem from our inner commitments. When we commit our ways to the Lord, trusting him, he leads us through our days. Trust turns plans into achievements. And those are the plans worth pursuing.
Pulling the draw handles for each four-thread unit of weaving is like doing counted cross stitch on the loom. I enjoyed cross stitch in the 1980’s and I am enjoying this drawloom version now. Very much. I started this Heart-Shaped Baskets table runner on Valentine’s Day—a fun way to celebrate the day!
Heart-Shaped Baskets. Adapted from a pattern in Damask and Opphämta, by Lillemor Johansson.Red 16/2 cotton weft on unbleached 16/2 cotton warp. The dark weft on a light warp makes consistency in beating that much more important.
Like weaving on any floor loom, I want to have consistency in my beat and in my selvedges. Inconsistencies in these basics can detract from the drawloom imagery of the final cloth. The main thing is to keep paying attention. And keep joyfully pulling those draw handles to create more hearts of love.
Grace is a gift of favor, not an earned reward. Forgiveness is the giving of grace. And gratitude results from receiving grace. Grace makes us graceful. Giving and receiving grace with consistency is what we’d like to see in ourselves. That’s when the love of God, in whose image we’ve been made, is most clearly seen in us. So we practice what we know to do. And pay attention. And keep joyfully weaving a heart of love, by God’s grace.
Drive up to this storybook cottage, and you can tell there is something special about it. It’s the home of Ed and Joanne Hall. When I arrive, Joanne greets me and takes me down the hand-crafted pine stairs to her delightful weaving studio dotted with floor looms.
Driving up to the Hall’s home and Joanne’s weaving studio in Montana.Välkommen = Welcome
I recently had the joy of learning the ins and outs of drawloom weaving in this storybook studio in Montana. After the class ended, Joanne and I sat at her kitchen table to share some thoughts about weaving.
Joanne Hall Photo credit: Ed Hall
Come join us, and sit in on our conversation…
If you could keep only one loom, what would it be?
The 59” Glimåkra Standard. That would be my loom, with a drawloom. A big loom is easier to set up, easier to warp because I can step inside it, and easier to weave on than a little loom. As you get older you need every advantage you can get.
Butterfly piece was woven on the very first warp Joanne put on her drawloom. The warp is 20/2 cotton, unbleached; and the weft is 16/1 linen. Being a tapestry weaver, I had to add more colors, so I laid in some colors and then I put a little gold leaf here and there. I did not want to add anything that looked like embroidery. I wanted my new work on the drawloom to have all the elements woven in. – Joanne Hall
What would you weave on that loom?
I would mostly make narrow warps. I could weave some blankets or larger things, as well, because it’s easy on that loom. It is easy to beat and so easy to treadle. I could also weave tapestry on it.
Describe the drawloom you would use.
With the Myrehed combination, I would have both the shaft drawloom and the single unit drawloom. I do like images, like tapestry weaving, so I would enjoy weaving with the single unit drawloom.
Story of the immigrants. Three of my grandparents immigrated from Sweden to America. This tells the story of their journey–walking, riding, then endless days on the boat, then walking again, all the way to Minnesota. – Joanne Hall
Are there any weaving secrets you’d like to share?
One important thing to know is to wind a warp with more than one thread, especially a long warp. It is easier to beam and you will prevent problems when you wind with two or more threads. And doing so may also have a positive effect on weaving that warp.
Another thing to consider is that once you start weaving, plan to invest in good equipment. Some weavers start out buying the smallest, least expensive equipment. That’s okay for getting started, but don’t spend too much time with inferior equipment. Once you start warping looms, get a big vertical warping reel that is more than two yards around. You can wind a warp in half an hour, an hour at the most. And the warp will be more even and accurate than one wound on smaller equipment.
If someone wants to learn more about weaving, what is a good way to start?
Go someplace where you can take a class weaving on floor looms, even if you have never woven before. Keep in mind that researching online can be more confusing than helpful. In a class you will learn much faster and you will probably get better information.
Front door of Joanne’s father’s father’s (grandfather’s) church in the small town of Ör, in Dalsland, Sweden. The “6” near the door was part of the date on the church, 1661. Woven on single unit drawloom by Joanne Hall.From a photo Joanne took in a small red house in an outdoor museum in the place where her mother’s family lived. These wooden shoes were on a rag rug in front of the fireplace. Woven on single unit drawloom by Joanne Hall.Fence that is typical of fences all over Sweden. This came from a photo of the fence around an outdoor museum in Falköping Sweden, Joanne’s mother’s grandparent’s home. Single unit drawloom, woven by Joanne Hall.
Any final thoughts?
In Sweden, weavers guilds are different than they are here in the US. Most everyone in Sweden can join a guild, called a vävstuga, which in Sweden is a place with looms—floor looms, big floor looms. You meet there as often as you want, and you can weave on floor looms in the company of other weavers, who are very helpful. If we had that, it would be wonderful.
That would be wonderful, indeed! I think I got a little taste of that, right here in your Montana studio. Thank you!
You will be happy to hear that my drawloom is all dressed and set up. And it works! Every glide of the shuttle reveals exceptional magic in the cloth. Even better than I had hoped.
Pattern heddles are long, with a normal 1/2-inch eye. Breast beam is used for sorting pattern heddles into units and then adding a 2-lb weight (lingo) to each unit. In this case, four heddles make one unit.Inkleband from my “band stash” helps me separate pattern units that will be placed onto a pattern shaft.
I had a few nervous moments while dressing this expansive loom, struggling with the pattern shafts. I learned the hard way that attempting a shortcut can mean taking much longer to complete the task. But, in the end, everything straightened out. Whew!
Oops. I successfully distributed pattern units onto one pattern shaft, moving it onto the pattern shaft holders. So, I thought, Why not do two shafts at a time? Uh oh. Not a wise move for a beginner like me.Ten pattern shafts, plus one extra shaft for selvedge threads. After fixing my little mishap, I took my time to finish transferring pattern units to the pattern shafts.Drawloom’s first project is mostly practice and samplers. This pattern is taken from Learn Damask in a Day, by Tina Ignell in VävMagasinet, January, 2011, pgs. 40-41.Eight-pointed star is seen often in traditional patterns. This eight-pointed star with diamonds is found in Drawloom Weaving, by Joanne Hall, p. 12. I created the border design at the loom.Light catches the warp threads in the 4-shaft broken twill as the cloth goes around the breast beam.
May your struggles turn into triumphs.
Your friend, Karen
~What are your questions? Joanne has answers~
Janet, who is interested in drawloom weaving, asks these questions. Joanne Hall provides the answers.
Q: I am trying to determine where to put a drawloom. How much floor space does a drawloom take? And how much additional area will I need around the loom?
A: These are good questions. Many weavers think about these things when they become interested in getting a drawloom.
Glimåkra 120cm Standard, with Myrehed drawloom. Photo from Drawloom Weaving, by Joanne Hall.
Width – For either the 100cm, 39.5-inch Ideal or the 100cm Standard, the width of the loom is 4 1/2 feet. Part of this is the ratchet wheel that sticks out 5 inches from the loom frame. The 120cm, 47-inch loom would be 8 inches wider.
Length with the loom extension – Without considering space for the bench, the depth is 7 1/2 feet. The Ideal loom will have the same depth as the Standard loom. The Standard loom can be set out another 1 1/2 feet further, which may be nice if one wants to have 50 pattern shafts.
One occasionally needs to stand on the left side of the loom during warping. You need to stand at the back of the loom and walk along the right side the loom to move the ratchet wheels. When beaming the warp, it is good to have two or three feet of space either at the front or the back of the loom. During warping, you will need space at one side of the loom to move the pattern shafts and warping sticks in and out of the loom.
So, you need about 6 – 7 feet by 12 feet, but some get by with a few inches less.
Q: Can any Ideal or Standard loom be converted to a drawloom? What are the “must haves” to look for in a used loom that will be set up as a drawloom?
Joanne Hall at the 100cm Ideal loom with single unit drawloom. (The drawloom extension is no longer made for the Ideal loom.) Photo from Drawloom Weaving, by Joanne Hall.
A: I frequently hear from weavers who send me photos of a loom and drawloom that they have found online. They want to know if $3800 is a good price for it. Often it is 40 years old and is being sold by the grandson, who cannot answer your questions.
If you are hoping to save a little by finding a used loom, it is best to purchase a used Glimakra Standard loom of any width and any age and then purchase the drawloom new. That way, you can get help when you need it. Plus, the Myrehed drawlooms have advantages over the older-style drawlooms.
I love my Myrehed drawlooms and once you try it, you will find that it is not so mysterious, but instead, a lot of fun to weave on.
