Transferring Warp Ends Takes Courage

There are four pairs of overlapping warp chains, with stripes to line up. I created a mess. A few options to consider: 1. Give up. 2. Weave it as is, destroying the design. 3. Use two sets of lease sticks, and expect problems with threading (2,064 ends). 4. Transfer all ends to a single set of lease sticks, arranging threads in order for each stripe.

Eight warp chains...to correct a huge winding error.
Each of four warp chains were duplicated when I realized I had wound only half the correct number of ends in each chain.

Option 4 seems the riskiest. If I lose the cross while transferring threads, I have an even bigger mess. It’s all or nothing. Go for it! Fortunately, my apprentice, Juliana, arrives in the nick of time to give me a hand.

Transferring color stripes to one set of lease sticks.
Lease cross is tied separately for each color “partial” stripe.
Transferring two warp chains to a single set of lease sticks.
Stripes from the two warp chains are transferred to a single set of lease sticks. Now the stripe colors are at their full correct width.
Preparing to transfer warp ends.
For the four center warp chains, each section of color is separated and tied at the cross. It takes an extra set of hands to transfer them in order to the primary set of lease sticks.
Delicate transfer of warp ends accomplished!
All warp ends are now successfully transferred to a single set of lease sticks. Let the loom dressing begin!

It worked! All the threads are successfully transferred to one pair of lease sticks. What a relief! I can beam the warp knowing that all is well. A beautiful double weave throw is imminent.

Pre-sleying the reed at the loom.
Warp is pre-sleyed at the loom. So far, so good.
Double weave warp ready to beam!
Ready to beam! Looking forward to this dressing and weaving experience.

We all have made a mess of our lives, and we know it. We hear of options to fix things, but one seems the riskiest: Transfer everything to God. But what if I mess that up, too? There’s good news. God transfers us. When we place our trust in Jesus Christ, God transfers us from our messy state to his good order. And the result is a weaving that showcases his workmanship—a beautiful you.

May you take a worthy risk.

With you,
Karen

Eight Bouts Is Enough

A zillion threads—2,064 ends, to be exact. I wound the warp in four bouts. And then, …a sinking feeling! I had wound each bout with exactly half the ends needed. This double weave throw, almost the full weaving width of the loom, needs 1,032 more ends.

Winding a colorful warp.
Winding one bout of the warp.
One warp bout of several.
One bout.
Warp bouts.
Two bouts.
Warp bouts for double weave throw.
Three bouts.
Four warp bouts for double weave throw.
Four bouts. Not enough.

I had counted ends as if there were only one layer. I did all four bouts that way. Yikes! Now I am winding four more identical bouts. I will put the lease sticks through all eight bouts. Somehow. Thoughtful study of the details on my planning sheet would have prevented this major error. But I knew what I was doing, and could remember the important things. Or, so I thought. And I was eager to get started…

Winding a cotton warp.
Winding more warp bouts.
Double weave warp with 2,064 threads!
Eight warp bouts. Ready to begin dressing the loom.

Walk. How we walk through life matters. To walk in a manner pleasing to God we need to know what he wants, and give that our full attention. If I run ahead, eager for the next experience, and neglect to consult the Grand Weaver’s project notes, I’m asking for trouble. The vibrant-colored warp will still get on the loom, but this is called learning the hard way.

May you learn most things the easy way.

Learning,
Karen

Tools Day: Tape Measures

A tape measure is a weaver’s best friend. Think about how many ways the tape measure serves you. I have one at each loom. Always. And I have a few others scattered around, hanging up, and in bags. Because you never know when you might need to measure something.

Tape Measure Uses

  • Take measurements to determine the desired size of the finished cloth, such as window measurements for curtains, floor space for area rugs, or length of skirt tiers for skirt fabric.
  • Measure the length of a guide string for winding the warp.
  • Find the starting point for the warp width in the pre-sley reed.
  • Double check the width of the warp after it is pre-sleyed.
  • Check the width of the warp on the back tie-on bar.
  • Center the reed in the beater for beaming the warp by measuring the distance from the warp in the reed to the outside edge of the beater on both sides.
  • Find the starting point to sley the reed by measuring half of the warp width outwards from the center of the reed.
  • Double check the width of the warp in the reed after it is sleyed.
  • Center the reed in the beater for weaving.
  • Adjust to the correct width of the warp on the front tie-on bar after the warp is tied on.
  • Mark the measured weaving length on twill tape or ribbon to use as a weaving length guide.
  • Measure how far one quill weaves.
  • Measure the distance between pieces that require unwoven warp, such as for fringe, or for tying knots between rag rugs.
  • Measure the distance from the first shaft (nearest the back of the loom) to the back tie-on bar (especially when you are hoping there is enough warp left to finish a symmetrical pattern).
  • Measure the width and length of fabric that is cut from the loom.
  • Measure the width and length of fabric that has been wet finished, dried, and pressed.
  • Measure your pleasure at the loom. Immeasurable!
Tape measure, in constant use at the loom. Let me count the ways...
Tape measure with imperial and metric units, both of which I use regularly. Metal ends have been removed from the tape to clearly see the tape’s markings, and because I slip the tape into a dent of the reed when I am marking the spot to start sleying.
Tape measure at the loom. Various uses.
Glimåkra Ideal loom, with tape measure in its usual place hanging on the end of the loom bench.
Tape measure usage at the weaving loom.
Glimåkra Standard loom, with tape measure ready for the next measuring task.
Preparing the loom for weaving.
Tape measure hanging over the back beam on the Texas hill country loom while pre-sleying the reed and positioning things to prepare for beaming the warp.
Tape measure hangs on peg strip above the work table.
Extra-long tape measure hangs on the peg strip above my work table.
Sometimes a long tape measure is needed!
Occasionally, I borrow Steve’s metal carpenter’s tape measure from his wood carving bench.
Travel tapestry supplies, including tape measure.
Compact retractible sewing tape measure rides in my travel tapestry bag. It has imperial and metric units.
No purse is complete without a tape measure, right?
No purse is complete without a tape measure, right? (A tape measure can outlive the business it promotes.)

What have I missed? Can you think of other ways your tape measure comes in handy?

May you be blessed in full measure.

All the best,
Karen

Quiet Friday: Linen Satin Dräll

This is one of those weaving projects that puts you on top of the world. Everything about it. Linen, ten shafts, five-shaft satin weave, ten treadles, gorgeous Moberg damask shuttle, single-shuttle rhythm, full-body weaving, magical fabric. I did have more than my share of knots in the warp, and a few skipped threads and selvedge loops. But you will see no evidence of those glitches now. All you will see is the natural beauty of linen, with its characteristic unevenness. And the reflective satin dräll weave, with its light-catching trickery.

The warp is Bockens unbleached 16/2 line linen. Two of the towels use 16/1 golden bleached linen for the weft. At my husband’s request, the remaining three towels have 16/2 linen weft, in ecru. The thicker weft helps make these into robust absorbent handtowels. A table square finishes off the set.

Enjoy the process with me as I reminisce over the start-to-finish pleasure of weaving these towels.

Winding a linen warp.

Linen warp chains.

Tying on the linen warp.

Tying up 10 treadles on a countermarch!

Sampling weft colors on a linen warp.

Sunlit linen damask weaving.

Hidden patterns in the 5-shaft satin.

Linen 5-shaft satin dräll!

Beautiful Moberg damask shuttle.

Spliced warp ends.

Linen satin dräll on the loom.

End of the warp is near. So many warp end repairs!

Cutting off! Linen 5-shaft satin dräll.

Just off the loom--linen 5-shaft satin.

Glimakra band loom. Hanging tabs for towels.

Ready to sew handwoven hanging tabs on new linen towels.

Just off the loom--linen 5-shaft satin handtowels.

Handwoven linen towel with handwoven hanging tab.

Handwoven set of linen satin dräll towels. Karen Isenhower

May you find pleasure in what you do.

Happy Weaving,
Karen

Anticipation Is Looming!

Everything starts on paper and in my mind. And then the action begins! Warps are ready now to dress two more looms. One in linen, and one in cotton. Linen for chair-seat upholstery, and cotton for kitchen towels.

Counting linen warp ends on the warping reel.
Counting thread goes over and under groups of warp ends (in this case, 40 ends) to help me keep track of the number of ends being wound on the warping reel. 8/2 linen, unbleached.
Cotton thread is measured out on the warping reel.
Solid color cotton is wound (measured out) on the warping reel.

These are part of the coordinating textiles I’ve been designing for our Texas hill country home. (See Awaken the Empty Looms)  I am looking forward to the moment these fabrics become visible! The anticipation is electric! I will know the success of my plans when I can see and feel the fabric. Every step, including getting these threads ready for the loom, gives me a preview glimpse of the actual fabric to come.

Two linen warp chains, ready for dressing the loom.
Two warp chains are prepared. This is a striped warp, and the chains will be spread separately, each with its own set of lease sticks.
Three warp chains of 8/2 cotton, ready to dress the loom!
Nothing like big, soft warp chains of 8/2 cotton!

Visible. Actual love is visible. It’s much more than kind thoughts and intentions. It is threads of kind thoughts that become touchable fabric in someone else’s life. Jesus Christ is the love of God made visible, in that God sent His Son so that we could fully live. How appropriate for us to make such a fabric visible for each other.

May you get a glimpse of the fabric to come.

Love,
Karen