Tag: mistake

Double Weave Throw – Take Two

Karen

Nothing about the original draft is incorrect, but when I wrote it in pencil on my planning sheet, I transposed one. little. thing. The threading key. “X = plum; black square = other colors.” Exact opposite of what is written in the draft from The Big Book of Weaving, by Laila Lundell. (See When You Misread the Threading Draft, where I discover my dilemma.)

One little mistake. Big consequences.
Blind to my own mistake, even as I double check my handwritten draft.

Thanks to Fiberworks weaving software I am working out a solution. I adjusted the tie-up, so the treadle tie-ups on the first, third, fifth, and seventh shafts trade places with the tie-ups on the second, fourth, sixth, and eighth shafts. It works. And now, the one little threading error that is clearly visible seems like a breeze to correct!

Ready to weave a cotton double weave throw.
Tie-up adjustments bring the correct warp ends to the surface. Solid stripes of color are set to produce the desired design when woven.
One threading error. No big deal at this point.
One blue warp end stands out like a sore thumb. I’m glad to find this one threading error at this stage in the process.

There are times when my whole perspective needs an adjustment. It’s time for love. Love adjusts our view. At the heart level, love brings about changes in us. It re-sets our attention and motivations. Because God loved us, we can love, too. We don’t see, understand, or know everything now, which shows how incomplete we humans are. But the love that heaven knows is something we get to participate in here and now. Our cloth is far from perfected, but our love adjustments give us a glimpse of cloth from another realm.

May you make necessary adjustments.

Love,
Karen

When You Misread the Threading Draft

Karen

What if you finish tying up the loom, eight shafts and eight treadles, having beamed, threaded, and sleyed 2,064 ends, and the first thing you see when you step on the treadles is… that you misunderstood the threading draft? Do you undo everything and re-thread? Not likely, if it took you eleven-and-a-half hours to do the threading in the first place. I am taking a deep breath. Time to walk away and think. Maybe I can adjust the tie-up, or maybe I can use it as is—a serendipitous design. Should I laugh or cry? My idea to serve my loved ones with handwoven gifts (See Weaving a Gift) is getting off to a rough start.

Double weave throw. Warp is tied on.
Warp is tied on. Ready to tie up the treadles.
Tie-up completed for eight shafts and eight treadles.
Lamms are connected. Treadle cords are positioned. Treadles are tied up. Eight shafts and eight treadles.
Double weave throw.
This view should show solid dark plum all the way across.
Double weave throw on the loom.
This view should show stripes of solid colors, not two-color stripes, with solid bands of dark plum in between.

Serve. I want to offer my best, especially when I’m making a gift for someone dear to me. It helps to look beyond the person, though, and realize my true service is to the Lord. Heart, soul, mind, and hands. I bring my misunderstandings and missteps of the heart to my Master Weaver, who has taken it on himself to make things right. And I’m reminded that as I serve someone with my weaving hands, the true gift is love. This double weave throw will be a reminder of that.

May you recover from your mistakes.

Humbly,
Karen

UPDATE: I have had a chance to put the draft on Fiberworks weaving software and work with it to adjust the tie-up. I think I found a solution. Stay tuned!

Transferring Warp Ends Takes Courage

Karen

There are four pairs of overlapping warp chains, with stripes to line up. I created a mess. A few options to consider: 1. Give up. 2. Weave it as is, destroying the design. 3. Use two sets of lease sticks, and expect problems with threading (2,064 ends). 4. Transfer all ends to a single set of lease sticks, arranging threads in order for each stripe.

Eight warp chains...to correct a huge winding error.
Each of four warp chains were duplicated when I realized I had wound only half the correct number of ends in each chain.

Option 4 seems the riskiest. If I lose the cross while transferring threads, I have an even bigger mess. It’s all or nothing. Go for it! Fortunately, my apprentice, Juliana, arrives in the nick of time to give me a hand.

Transferring color stripes to one set of lease sticks.
Lease cross is tied separately for each color “partial” stripe.
Transferring two warp chains to a single set of lease sticks.
Stripes from the two warp chains are transferred to a single set of lease sticks. Now the stripe colors are at their full correct width.
Preparing to transfer warp ends.
For the four center warp chains, each section of color is separated and tied at the cross. It takes an extra set of hands to transfer them in order to the primary set of lease sticks.
Delicate transfer of warp ends accomplished!
All warp ends are now successfully transferred to a single set of lease sticks. Let the loom dressing begin!

It worked! All the threads are successfully transferred to one pair of lease sticks. What a relief! I can beam the warp knowing that all is well. A beautiful double weave throw is imminent.

Pre-sleying the reed at the loom.
Warp is pre-sleyed at the loom. So far, so good.
Double weave warp ready to beam!
Ready to beam! Looking forward to this dressing and weaving experience.

We all have made a mess of our lives, and we know it. We hear of options to fix things, but one seems the riskiest: Transfer everything to God. But what if I mess that up, too? There’s good news. God transfers us. When we place our trust in Jesus Christ, God transfers us from our messy state to his good order. And the result is a weaving that showcases his workmanship—a beautiful you.

May you take a worthy risk.

With you,
Karen

Eight Bouts Is Enough

Karen

A zillion threads—2,064 ends, to be exact. I wound the warp in four bouts. And then, …a sinking feeling! I had wound each bout with exactly half the ends needed. This double weave throw, almost the full weaving width of the loom, needs 1,032 more ends.

Winding a colorful warp.
Winding one bout of the warp.
One warp bout of several.
One bout.
Warp bouts.
Two bouts.
Warp bouts for double weave throw.
Three bouts.
Four warp bouts for double weave throw.
Four bouts. Not enough.

I had counted ends as if there were only one layer. I did all four bouts that way. Yikes! Now I am winding four more identical bouts. I will put the lease sticks through all eight bouts. Somehow. Thoughtful study of the details on my planning sheet would have prevented this major error. But I knew what I was doing, and could remember the important things. Or, so I thought. And I was eager to get started…

Winding a cotton warp.
Winding more warp bouts.
Double weave warp with 2,064 threads!
Eight warp bouts. Ready to begin dressing the loom.

Walk. How we walk through life matters. To walk in a manner pleasing to God we need to know what he wants, and give that our full attention. If I run ahead, eager for the next experience, and neglect to consult the Grand Weaver’s project notes, I’m asking for trouble. The vibrant-colored warp will still get on the loom, but this is called learning the hard way.

May you learn most things the easy way.

Learning,
Karen

Bold Color and Weave

Karen

Remember the placemats I started on my Texas hill country loom in Colors on Trial? The pattern in the fabric looks nice and pretty. But it doesn’t display the striking color-and-weave effect that I expected. The problem is not the threading, nor the colors.

Color and weave using single weft instead of doubled weft.
Nice and pretty, but lacking the boldness of the planned color-and-weave effect.

Aha! I overlooked an important detail on the treadling draft—the weft is supposed to be doubled. That changes everything! Since there is very little excess warp for this project I need to back up and start over.

Backing up the weaving. Clipping through weft threads. Yikes!
Backing up. After loosening warp tension, I carefully clip the weft threads down the center of the warp. I go at a snail’s pace to avoid accidentally snipping any warp ends.
Backing up. Weft removal, one pick at a time.
Removal, one pick at a time. I press the treadles in reverse order to pull out each row of weft threads.
Weft has been removed. Now ready to start over!
Back to the start. Sufficient weft has been removed. Now I am ready to start over.

I am losing the nice and pretty fabric. But it is being replaced with something better—fabric with a bold color-and-weave effect.

Two double-bobbin shuttles with color and weave.
This is the color-and-weave effect I was looking for! Two double-bobbin shuttles carry the weft threads.
Color and weave for placemats.
First placemat is a “Joseph’s coat” combination of colors. Bold color-and-weave effect has a striking pattern.

I would like my life to be nice and pretty, easy and comfortable. But if I get closer to the Grand Weaver’s intentions, I see something different—a bold strength of purpose. Not necessarily easy. God’s will is better than mine. When we aim to understand his will, we see details that we’ve overlooked. It affects how we walk through life. We take his doubled weft threads to replace our well-meaning attempts. The result is a beautiful display of striking life-changing effects.

May you be mindful of the important details.

With you,
Karen