Tag: problem solving

Tame the Wool

Karen

I am in Germany this week, but before I left home I started the blue wool blanket. Twelve shafts and twelve treadles is challenge enough. Double weave with a sett of 5 EPC (12 EPI) per layer in 6/2 Tuna wool adds to the challenge. This wool stubbornly clings to itself in this sett. I don’t care to fight defiant wool to get a clean shed on every treadle! I could re-sley to a coarser sett. But I want to keep the sett as is, as written for this project in The Big Book of Weaving, by Laila Lundell. Cowboy Magic to the rescue! I discovered this horse mane detangler when I wove a mohair throw a few years ago. It rinses out nicely in the wet finishing. It worked magic for me at that time. Now, with a small amount of slick detangler on my fingers I can tame these blue wool fibers. Voila! No more fighting to get a clean shed.

Cowboy Magic to the rescue to tame wool yarn double weave.
Twelve treadles means clearing and adjusting the shed twelve times just to get started. Before Cowboy Magic, I had to run my hands through the shed to clear it each time. That’s asking for trouble–and skipped threads all over the bottom layer.

Now I have something to look forward to when I get home.

Blue wool double weave blanket on 12 shafts.
Twelve shafts gives me three blocks in this double weave small blanket. I think it will be a very pretty addition to use in our little Casita Travel Trailer on cool evenings.

May you eliminate unnecessary fighting.

Weave Happy,
Karen

Tools Day: Band Loom Warping Board

Karen

It is almost effortless to make a short warp for the band loom. All you need is a peg at the beginning and a peg at the end. You can use a spoke of the warp beam wheel, for instance, at one end, and the leg of an upside-down stool at the other. I normally use my warping reel, though, for even a simple warp, because the reel is so handy. However, I don’t have my warping reel here at the apartment, so I am turning my band loom into a handy warping board for this band loom project.

Using the Glimakra band loom as a warping board.
Using the Glimåkra band loom to measure a narrow cottolin warp.

How to Use the Band Loom as a Warping Board

Tools and supplies:

  • Glimåkra band loom
  • Thread for weaving a narrow band
  • Basket and/or spool holder(s)
  • Scissors

How to use the band loom as a warping board.
Starting at one peg and ending at another. The band loom becomes a simple tool for winding a short warp.

For a warp of approximately two meters:

  • Put the warp thread on the floor below—quills in a basket, and/or thread tubes on spool holders.
  • Using two or more ends, tie the ends together with an overhand knot. (I used three ends together for this warp.)
  • Bring the warp ends up around the warp beam and over the back beam.
  • Loop the knot on the starting peg.
  • Draw the ends from the starting peg to the ending peg, around the band loom, following this path:
  1. Starting peg–upper heddle peg nearest back beam
  2. Lower heddle peg nearest back beam
  3. Back beam
  4. Warp beam
  5. Cloth beam
  6. Front beam
  7. Lower heddle peg nearest front beam
  8. Ending peg–upper heddle peg nearest front beam
  • Follow the winding path in reverse order back to the starting peg.
  • Continue winding until you have reached the desired number of ends.
  • Cut the ends and tie off at the starting peg or the ending peg.
  • Tie one or two choke ties, if needed. (I didn’t need them for this short warp.)
  • Carefully remove the warp and dress the band loom as usual. (For a tutorial on dressing the band loom, click here: Quiet Friday: Band Loom Warping and Weaving.)
  • Weave to your heart’s content.

Weaving hanging tabs for towels on my Glimakra band loom.
One meter of woven band is cut off. The remaining band warp is tied back on. Weaving can resume at any time.

Preparing to sew handwoven ribbons onto handwoven towels for hanging.
Ends secured, and cut in 10.5 cm lengths, the tabs are ready to be sewn onto the double weave towels.

May you find tools you didn’t know you had.

Happy band weaving,
Karen

Building Blocks in Double Weave

Karen

Troubles. What troubles? All is forgotten now that the shuttle is ready to soar. After my threading misadventure and correction, I’m ready to weave! But first… The treadle tie-ups need adjustments. And then, after weaving a couple inches, a few more adjustments. Now the shed is nearly perfect on every treadle. Ready, set, wait a minute… Sample. Which shuttle goes where to lock in the weft? How many picks make a square? Is my beat consistent?

Waterfall of colorful threads over the back beam!
Like a spectacular waterfall, warp ends splash with color over the back beam. First adjustments have been made to treadle tie-ups. Ready to start weaving the sample.

Sample first. Double weave throw about to begin.
Sample gives opportunity to practice and experiment. Checking shed clearances, weft color tryouts, synchronizing two shuttles, consistent beating–a few of the reasons why it makes sense to sample first.

After completing the sample, I am now weaving the wide dark plum beginning border of the double weave throw. In a few inches I will be enjoying the colorful blocks that we have all been waiting for. Building blocks. Success, setbacks, adjustments, and practice, all build a foundation of weaving experience.

Beginning dark plum border of a double weave throw.
Here it is. The real thing. The beginning border of the actual double weave throw.

Build. If I’m not careful, my attention goes to the building up of myself. Yet, love focuses on others to build them up. It’s through a process of success, setbacks, adjustments, and practice that love flourishes. When your strong desire is to see the colorful blocks of the weave, you press through until you see it. Love is even stronger than that. Our example is Christ. His love makes the pattern of love possible in us.

May you build on what you learn.

Happy weaving,
Karen

Double Weave Throw – Take Two

Karen

Nothing about the original draft is incorrect, but when I wrote it in pencil on my planning sheet, I transposed one. little. thing. The threading key. “X = plum; black square = other colors.” Exact opposite of what is written in the draft from The Big Book of Weaving, by Laila Lundell. (See When You Misread the Threading Draft, where I discover my dilemma.)

One little mistake. Big consequences.
Blind to my own mistake, even as I double check my handwritten draft.

Thanks to Fiberworks weaving software I am working out a solution. I adjusted the tie-up, so the treadle tie-ups on the first, third, fifth, and seventh shafts trade places with the tie-ups on the second, fourth, sixth, and eighth shafts. It works. And now, the one little threading error that is clearly visible seems like a breeze to correct!

Ready to weave a cotton double weave throw.
Tie-up adjustments bring the correct warp ends to the surface. Solid stripes of color are set to produce the desired design when woven.

One threading error. No big deal at this point.
One blue warp end stands out like a sore thumb. I’m glad to find this one threading error at this stage in the process.

There are times when my whole perspective needs an adjustment. It’s time for love. Love adjusts our view. At the heart level, love brings about changes in us. It re-sets our attention and motivations. Because God loved us, we can love, too. We don’t see, understand, or know everything now, which shows how incomplete we humans are. But the love that heaven knows is something we get to participate in here and now. Our cloth is far from perfected, but our love adjustments give us a glimpse of cloth from another realm.

May you make necessary adjustments.

Love,
Karen

End of Warp Drama

Karen

At the final inches of weavable warp, my regular boat shuttle will not fit through the shed. I wove the first half of this final rug thinking I had more than enough warp left to complete a symmetrical design.

Spaced rep rag rug. Last rug on the warp!
Final rug on this warp. I planned a symmetrical design that reverses at the center of the rug.

This warp is almost finished! Rag rugs.
As the back tie-on bar comes over the back beam I am concerned about whether I have enough warp to finish the second half of the rug.

Drama at the end. I still need to weave the ending warp thread header. Time to pull out my secret weapon—a low-profile shuttle. No worries or fretting. The slim shuttle deftly (with a little prodding) weaves the eight picks of the warp thread header that concludes this final rug. Whew.

Low-profile boat shuttle fits through at end of warp.
Low-profile shuttle saves the day. I’m so near the end of the warp that there is not enough room in the shed for my regular boat shuttle to fit through.

End of warp drama! But I made it! Whew.
Very end of the warp is seen right behind the shafts. After the eight picks of warp thread header, I wove as many picks of scrap weft as I could…by hand.

When we face adversity, and our usual coping methods are not working, we feel the pressure and anxiety. It’s time to activate our secret weapon—a gentle and quiet spirit. Gentleness and quietness are beautiful embellishments to the hidden person of the heart. This humble spirit enables you to glide through the tightest situations. Best of all, those last picks you carefully weave will keep the lovely rag rug you’ve been working on from unraveling.

May your heart glow with gratitude.

Happy Giving of Thanks!
Karen