Tag: warping

Linen Coming Next

Karen

Linen warp and linen weft is a recipe for elegance. The warp chain is a pleasant sight. It’s a signal that something is going to happen, that action is in the air, that a loom is about to be dressed!

Linen warp chain.
176 ends of 16/2 Golden Bleached linen.

When I see a linen warp chain, I anticipate an exciting project. It’s a picture of work to be done–beaming, threading, sleying, tying on, and tying up. And it’s a picture of fabric to be woven. Linen brings its own challenges, I know. Careful technique and mindful practices are a must. But I’m eager get started!

Preparing to beam a linen warp.
Linen warp is placed with the lease cross just on the other side of the beater.

Advent. The word means “coming.” It’s the season we are in right now, leading up to Christmas. It signifies the world waiting for the coming of Christ. As a warp chain is a picture of anticipation and hope, so is Advent. And the coming of Jesus answers that hope. The story of Christmas is the story of God with us. Jesus, God with us still. A line from “O Little Town of Bethlehem,” an old carol written by Phillips Brooks, says it well, “O come to us, abide with us, our Lord Emmanuel!”

May your anticipation and hope be satisfied.

Blessed Christmas,
Karen

Quiet Friday: Plattväv Towels and Thanksgiving Prayer

Karen

Start to finish, the plattväv towels have been a handweaver’s joy. Narrow stripes on the warp beam are strangely invigorating. Does it take extra effort to wind a warp with many stripes? Yes–cut off one color and tie on a new color, over and over. But when the loom is dressed and ready to go, the weaving is a breeze. Being cottolin, the warp is fully compliant; and with a little care, the linen weft becomes a weaver’s friend. Plattväv, the icing on the cake, gives me a simple pattern weft that dresses up these plain weave towels. (And, yes, I am in the process of developing a kit for these plattväv towels.)

Planning handwoven towels.

Cottolin warp with counting cord.

Striped warp for plattväv towels.

Threading the loom for plattväv towels.

Tying up treadles the easy way.

Weft auditions for plattväv towels.

Plattväv towels on the loom, with linen weft.

Plattväv towels on the loom. Karen Isenhower

Blue linen pattern weft.

Beautiful blue linen pattern weft.

Plattväv towels coming off the loom!

Off the loom and ready for trimming threads.

Band loom weaving.

Plattväv towels ready to roll!

Plattväv towels. Karen Isenhower

The joy of weaving is a blessing, as is the joy of friendships across the miles. Thank you for walking this journey with me.

Thanksgiving prayer: Thank you, Lord, for everything.

May you overflow with blessings and reasons for giving thanks.

Thankful for you,
Karen

Quiet Friday: Countermarch Back Savers

Karen

After back surgery, I wondered how-in-the-world I would be able to tie up my countermarch looms. After a four-week ban on bending over, I was eager to weave, but not eager to do anything that might strain or injure my back.

Two simple maneuvers made it possible for me to tie up the lamms and the treadles on both of my Glimäkra countermarch looms:

  1. Remove the lamms. Treadle cords are added while sitting in a comfortable position.
  2. Detach the treadles. Bring treadles closer to the front of the loom for attaching treadle cords.

And two important practices kept me from over-reaching and overdoing it:

  1. Sit on a low stool instead of the back of the loom or the floor.
  2. Take frequent breaks to stand up, stretch, and walk around.

Tools:

  • Low stool for sitting
  • Rolling cart (IKEA cart) or small table
  • Plank of wood, longer than the loom is wide (one plank of warping trapeze, 1″ x 5″)
  • Treadle cords, Texsolv pins, other tie-up supplies
  • Length of cord to hold treadle up (Texsolv cord that’s used for hanging the reed for sleying)

The 120 cm (47″) Standard loom has open space in the loom, making it easy to get within arm’s reach of most things; but the challenge increases with the number of shafts–eight for this tie up.

Alpaca warp, ready for countermarch tie-up without back strain.
Beamed, threaded, sleyed, tied on. Waiting for the final step of tying up lamms and treadles.
  • Lamms are removed, 2 at a time, and placed on the cart to add the treadle cords, all the while sitting on a comfortable stool.

Countermarch tie-up without back strain.

  • After all 8 lower lamms have the treadle cords added, the lamms are reinserted in the loom, 2 at a time.

Countermarch tie-up without back strain.

  • Treadle rod is removed to detach the treadles. Wood plank keeps the treadles from sliding back while treadle cords are attached at the front of the loom.

Trick to make countermarch tie-up easier on the back.

  • Cord acts as a sling to hold the treadle up to a comfortable height.

Tips for making countermarch tie-ups more back friendly.

  • The raised treadle helps with visibility, and enables the use of both hands, especially helpful for the “Vavstuga method” of tying up treadles with knitting needles (I use sharpened dowels). After treadles are tied up, re-attach the treadles at the back of the loom.

Hints for making countermarch tie-up more back friendly.

 

The 100 cm (39″) Ideal loom requires more reaching. Tying lamms to the shafts is a challenge for short arms, like mine. With four shafts, and only three treadles for this tie up, the rest of the process isn’t difficult.

Threaded for striped towels. Glimakra Ideal.
Threaded for striped towels. Glimäkra Ideal has smaller spaces in which to work than in the Standard loom.
  • Upper lamms are placed on the cart. I hold the weaving draft in my lap as I add the treadle cords to the lamms.

IKEA cart as tie-up helper.

  • Lower lamms are removed as the pin is pulled out. After the treadle cords are added, the lamms are reinserted.

Removing lamms to make countermarch tie-up back friendly.

  • Detached treadles lay on the floor. They easily pivot up at the front of the loom for attaching treadle cords.

Tips for making countermarch tie-ups less straining on the back.

  • Everything is tied up and ready to weave!

All tied up and ready to weave!

May you stay healthy to live long and weave.

Happy Weaving,
Karen

Stripes on the Warp Beam

Karen

Why are stripes appealing? Stripes on the loom look good. I don’t usually wind warps in advance. I like to wind a warp and put it directly on the loom. But, recently, when I wasn’t able to weave, I was able wind warps. Now, one of those warps is beamed, and soon I’ll be weaving some striped plattväv towels.

Striped warp for cottolin and linen towels. Glimakra Ideal.
Narrow stripes wrap around the back beam. Next step is threading heddles. One step closer to weaving towels…

This draft is from one of my favorite Swedish weaving books, Kalasfina Vävar, by Ann-Kristin Hallgren. I changed the colors and modified the stripes, while attempting to keep the attractive appeal of the original stripe design. We will see the full effect when weaving begins. The warp is the first part of the picture. The weft always brings a transformation. The golden bleached linen, in this case, won’t change the warp, but it will create a fresh palette.

Black and white photo shows the color values.
Making a black and white photo is a good way to see the color values.

Faith and truth are partners. Truth becomes clear through faith. Warp and weft. Truth and faith. A fabric of convictions is woven to hand to the next generation. The good news of Jesus Christ is a message of faith and truth. The truth doesn’t change; but it comes alive when woven with faith.

May your convictions be securely woven.

Yours truly,
Karen

Autumn Alpaca

Karen

Autumn is the perfect time of year to plan alpaca scarves. This three-ply alpaca yarn is dreamy. The thing I love about winding a warp like this is the feel of the soft yarn as it goes through my fingers. This warp is going on the big loom for an eight-shaft wavy twill.

Winding a warp of alpaca yarn for scarves.
Counting cord is used to keep track of the number of ends that are wound onto the warping reel. This warp was counted 40 ends at a time.

The first pass around the warping reel must be correct, which is why I measure the distance first with a guide string. After the first pass, I simply follow the correct path around until all 136 alpaca ends have been included. I am already starting to dream about the eventual soft and cozy scarves.

100% alpaca in a 3-ply yarn, preparing warp for weaving scarves.
100% alpaca in a 3-ply yarn.

Alpaca warp chain.

Following the path of the guide string is like having faith to follow Christ. Faith grows in good soil. And there is no better soil than Christ himself. I don’t yet see the scarves, but it’s not hard for me to imagine what they will be like. I have touched the yarn, and the completed warp chain is a sweet preview. When we see what Christ has completed, faith takes root and gives us reason to trust him for everything else.

May your roots grow down into good soil.

The Three Rosepath Rag Rugs For Now have been hemmed and are listed in my Etsy shop. Take a look!

Yours,
Karen