finishing – Page 14 – Warped for Good

Quiet Friday: Plattväv Towels and Thanksgiving Prayer

November 25, 2016November 27, 2016 Karen

Start to finish, the plattväv towels have been a handweaver’s joy. Narrow stripes on the warp beam are strangely invigorating. Does it take extra effort to wind a warp with many stripes? Yes–cut off one color and tie on a new color, over and over. But when the loom is dressed and ready to go, the weaving is a breeze. Being cottolin, the warp is fully compliant; and with a little care, the linen weft becomes a weaver’s friend. Plattväv, the icing on the cake, gives me a simple pattern weft that dresses up these plain weave towels. (And, yes, I am in the process of developing a kit for these plattväv towels.)

The joy of weaving is a blessing, as is the joy of friendships across the miles. Thank you for walking this journey with me.

Thanksgiving prayer: Thank you, Lord, for everything.

May you overflow with blessings and reasons for giving thanks.

Thankful for you,
Karen

Quality Rug Warp

October 18, 2016October 17, 2016 Karen

After a few weeks of having to refrain from weaving, I am thankful that there was warp to weave one more rug. The quality of warp thread matters because it is the core of the rug. Never underestimate the value of good, strong warp thread for weaving rag rugs.

Rosepath rag rug almost complete! — First hem is going around the cloth beam. Weaving is almost complete!

I like to use 12/6 cotton from Bockens. This rug warp is a six-strand thread with high twist. The smooth, nearly-unbreakable thread enables me to ratchet up the tension on the warp. That high tension helps produce sturdy, tightly packed rugs with tidy selvedges. Knowing you are making a rug that will last is a very satisfying and enjoyable weaving experience.

Cutting off never gets old! — Cutting off never gets old.

Rosepath rag rug just finished. Karen Isenhower — Ta da! Hems are folded under for the picture. As soon as the hems are stitched, this rosepath rag rug will have its Etsy photoshoot.

With finishing nearly complete, this rag rug will be enjoyed on the floor of someone’s home. Most people aren’t aware of the structural elements of a rag rug, but they do notice quality in the finished work. People, too, have an inner core–the heart. The heart matters. The strength of our inward framework determines our outward attitudes and actions. Since true quality is found in a life that serves others, most everything comes down to a matter of the heart.

May your quality of life be noticeable.

Happy weaving,
Karen

Three Rosepath Rag Rugs For Now

September 30, 2016September 29, 2016 Karen

There are three completed rosepath rag rugs on the loom, with warp remaining for at least one more rug. Since I don’t know how soon I will be able to weave the remainder, cutting off the completed rugs makes sense. After hemming, I will have three new rugs for Etsy. (Don’t miss the new Quick Tip video at the end of this post!)

Cutting off rosepath rag rugs, with some warp remaining to be woven. — As the warp ends are cut, they are tied into one-inch groupings to simplify tying back on to the tie-on bar.

Unrolling some new rosepath rag rugs! — Warping slats are used as spacers between rugs. Some of my slats are barely wide enough for this warp.

I look forward to full weaving days again, with both looms dressed, and shuttles zooming. That rag rug warp still on the loom will be a reward worth waiting for.

Rosepath rag rug ready to be hemmed. Karen Isenhower — One rug has warp end knots, and is ready for pressing and hemming.

Two rosepath rag rugs just off the loom. Karen Isenhower — Rosepath in two variations.

Last week, when I awoke from surgery, the relentless pain I had been experiencing in my left leg and lower back was gone. Completely gone! It made me think of heaven. Ancient writings tell us that the lame will leap like a deer, and that sorrow and sighing will flee away. There’s no place for pain in heaven. All the people there have been healed and restored. That’s a reward worth waiting for. And I won’t be surprised if there are at least a few in heaven who are weaving away to their heart’s content.

May you know what to do while waiting.

Wishing you well,
Karen

Quiet Friday: Eight-Shaft Block Twill Rugs and More

September 23, 2016September 20, 2016 Karen

The sample piece, a long rug and a short rug with string yarn, and a short rag rug. I look on these results with fondness. A challenge and a joy to weave! The two string yarn rugs will have bound hems when I get a chance to do that. I have world map fabric for the hems. The sample piece and the rag rug piece are destined to become cute bags. I have all the supplies–band loom-woven strap, and yarn to make a band loom-woven strap, lining material, and a handwoven remnant to use as inside pockets. Now, all I need is time. And we all have as much as we need of that.

In case you needed a smile today! — In case you needed a smile today. Our dear Lucia Annabella.

May you have all the time you need.

All the best to you, my dear friends,
Karen

Tools Day: Warping Slat Spacers

August 9, 2016August 8, 2016 Karen

Rag rugs are not finished when you cut them from the loom. In fact, they can fall apart if you are not careful. A rag rug is not secure until warp ends are tied into knots. You need to leave space on the warp between rag rugs to make room for the eventual knots.

One way to leave space on the warp is by using warping slats as spacers. Simply weave about two inches of scrap header after the end of a rug. Then, insert warping slats in alternating plain weave sheds. And then, weave another scrap header. Now, you’re ready to start the next rug.

Warping slats as spacers between rag rugs. — Weaving is finished. It is time to cut these rugs from the loom. Four warping slats are seen between two rag rugs as the rugs are being pulled off the loom.

I leave about eight inches (20 cm) of warp between rugs. This gives me enough length for tying the needed square knots. If you are leaving fringe, add enough to include the desired fringe length. When you insert the warping slats, keep them centered so that they can go around the breast beam and cloth beam without catching on the sides of the loom.

Warping slats are used as spacers between rag rugs. — Full-width warping slats are placed carefully so that they do not extend beyond the weaving width on the right or on the left. This view is looking down on the end of the breast beam.

It is easy to separate the rugs after they are off the loom. Cut between slats using a rotary cutter, with a cutting mat underneath.

Warping slats are used as spacers between two rag rugs on the loom. — Double binding rag rugs are ready to be removed from the loom. The two rugs will be cut apart by slicing the warp between the middle two warping slats.

May you make the best use of your time and tools.

All the best,
Karen