Two of my looms are getting the lion’s share of my attention right now. That doesn’t keep me from sneaking out to the drawloom, though, for an hour here, an hour there. Those hours add up. I have everything threaded and sleyed. The reed is in the beater now, and I’m tying on the warp.
Pattern heddles have been threaded. Ground heddles are being threaded. 888 16/2 cotton ends on six ground shafts.Moving the reed and threaded ground shafts to the front of the loom is tricky. Having a second pair of hands (Steve’s) definitely helps.
148 single unitlift heddles and 45 pattern shafts are waiting in the wings. I’m setting up the combination drawloom again for maximum flexibility in designing. That also means I’ll have abundant possibilities for weaving. Oh, what exuberant escapades await! This anticipation keeps me skipping down the path of preparation, ever so steadily, as I dream of entering that magical world of drawloom weaving once again.
I like to tie all the ends into small sections (about 1 inch at the reed) first. Then I tie them on the front tie-on bar, starting right of center, and then alternate left, right, and so on.
There is a door into an invisible kingdom. You may have seen it as a child. The door to God’s invisible kingdom is open. With childlike trust we give our heart to Jesus and his kingdom comes alive. In the here and now, as our preparation continues, we are ever mindful of the abundant existence of the ever after. What exuberance awaits!
We weavers are resourceful. We enjoy finding solutions that make our time at the loom more efficient, while raising the quality of our weaving. We’ve done some of these little tricks so much we don’t think about them anymore. And then, some innovations are things we think up on the spot because necessity, as you know, is the mother of invention.
Keep Count
Necessity: Keep from losing my place with treadling repeats. Solution: A strip of blue painter’s tape with “3 2 1” and a rubber band, placed on the breast beam. Move the rubber band on the tape (from right to left) to track repeats.
I need help counting to 3 when it comes to treadling repeats. On the Glimåkra Standard loom, I am able to loosen the warp enough to lift the breast beam so I can put a rubber band on it. Without a removable breast beam, one could use a separate small piece of tape instead of a rubber band to keep track.Low tech solution for keeping track.
Shuttle Catch
Necessity: Keep from fumbling the catch, having to reposition the shuttle in my hand to send it back across the warp. Solution: Keep my eye on the shuttle. If I turn my head to watch the movement of the shuttle, my catching and throwing improves immediately. This makes my selvedges improve, too.
It is easy to throw and catch the shuttle without actually looking at your hands. I have to consciously remember to turn my head to follow the shuttle with my eyes.
Leave No Trace
Necessity: Keep from leaving slightly perceptible lines in the woven cloth that reveal every time I stop to move the temple and advance the warp. Solution: When it is almost time to advance the warp, I move the temple and then weave one or more pattern sequence(s) before advancing the warp. This helps me leave no trace of starting and stopping.
Almost ready to advance the warp, I remove the temple and reposition the pins on my guide tape. Then, I put the temple back on, near the fell line.After moving the temple, I weave one or more complete treadling sequences before advancing the warp.After advancing the warp, I know exactly where I left off because of my tape-and-rubber-band counter. My eyes are on the shuttle to continue this segment of weaving.
Do you have a simple tip that improves your efficiency and/or quality at the loom? Please share in the comments.
I threaded 888 warp ends. I am getting ready to thread those 888 ends again. It’s part of the preliminary process for a new drawloom project. A drawloom has two sets of heddles. Thread the pattern heddles. Then, thread the ground heddles. I enjoy all the preliminaries because of what they bring about—a delightful new weaving adventure!
Before I start threading, I count out all the lingos (weights) I need for the pattern heddles. Then, I hang a lingo on each unit of pattern heddles. In this case, there are 148 units, and six heddles in each unit. I move all those prepared units (heddles with lingos) to the back of the loom, get comfortable on my loom bench, and start threading. After a few sessions, I am finished threading the pattern heddles.
Pattern heddles hang at the back of the loom for threading.On the walking path to my drawloom studio each day I see the startling blooms of our Texas hill country Bluebonnets. Just imagine the unseen preliminaries for this beauty!Threading continues.All 888 pattern heddles are threaded! Ground heddles are next…
Next up, I will thread long-eye heddles on six ground shafts. A few more start-up operations after that, and then we will see this big ol’ boat raise its sails and leave the shore for another exhilarating adventure in weaving!
May you enjoy the preliminaries for every new start.
When I pick up a color of thread I don’t want to have to guess if it’s the right color. Four of the five blues in the weft sequence are close neighbors in value. The one color that is easy to identify is the navy blue, which provides a good contrast among the blues.
Weft color order follows the sequence of the warp color order. Five blues for this 8-shafttwill in 8/2 cotton.
The weft order matches the warp order, and is marked out on a ribbon. I am using a separate boat shuttle for each shade of blue. But how do I know which color is which, when the difference is subtle from one color to the next?
Simplify Subtle Color Changes
Give each color a number. Write the numbers next to the colors of the warp order on the Project Notes.
Weft colors are the same as the warp colors. The Project Notes show all the details. “1, 2, 3, 4, 5” is added to the sheet to give each color a simple number.
Label the thread tubes with a small piece of blue painter’s tape. Each tube of thread is numbered to correspond with the numbers on the Project Notes.
Handy blue painter’s tape is used to make removable labels.Thread tubes are labeled with their identifying number.
Label each boat shuttle with its assigned color number, using a small piece of blue painter’s tape.
I would like to finish this skirt project in time to wear the skirt this summer. Huckaback (huck lace) is easy to weave, but it takes time. All I need is time.
Linen weft threads pack in tighter and make better selvedges when they are dampened. I need a tight weave to square the pattern that is coming on the next two skirt tiers. And the edge of the skirt flounce is a selvedge that will be fully exposed, so tidy selvedges are a must. It takes a little bit of time to hold a damp cloth against the thread as I wind a quill, or to wrap a damp cloth around a quill that’s already wound. It’s worth it. In the scheme of things, that little bit of time is nothing…and everything.
By dampening the 16/1 linen weft I am able to get a tight weave without having to beat as hard.The edge with the poppy-thread border will be the lower edge of each tier on the three-tiered skirt. I’m paying special attention to the selvedge, and dampening the linen weft really helps!
We all have a little bit of time. Look at your hand. A lifespan is no longer than the width of your hand. A lifetime is one moment to God. Our life begins and ends in one breath of God. This little bit of time we have is nothing…and everything. This is how God loved us in our little bit of time: he gave his one and only Son, so that everyone who believes in him would not perish but have timeless life with him.
