Tag: threading

Sneak Out to the Drawloom

Karen

Two of my looms are getting the lion’s share of my attention right now. That doesn’t keep me from sneaking out to the drawloom, though, for an hour here, an hour there. Those hours add up. I have everything threaded and sleyed. The reed is in the beater now, and I’m tying on the warp.

Six ground shafts on the drawloom. Threading.
Pattern heddles have been threaded. Ground heddles are being threaded. 888 16/2 cotton ends on six ground shafts.
Getting ready to tie on the warp on the combo drawloom.
Moving the reed and threaded ground shafts to the front of the loom is tricky. Having a second pair of hands (Steve’s) definitely helps.

148 single unit lift heddles and 45 pattern shafts are waiting in the wings. I’m setting up the combination drawloom again for maximum flexibility in designing. That also means I’ll have abundant possibilities for weaving. Oh, what exuberant escapades await! This anticipation keeps me skipping down the path of preparation, ever so steadily, as I dream of entering that magical world of drawloom weaving once again.

Getting the drawloom ready to weave.
I like to tie all the ends into small sections (about 1 inch at the reed) first. Then I tie them on the front tie-on bar, starting right of center, and then alternate left, right, and so on.

There is a door into an invisible kingdom. You may have seen it as a child. The door to God’s invisible kingdom is open. With childlike trust we give our heart to Jesus and his kingdom comes alive. In the here and now, as our preparation continues, we are ever mindful of the abundant existence of the ever after. What exuberance awaits!

May you see like a child.

Happy Weaving,
Karen

Process Review: Drawloom Preliminaries

Karen

I threaded 888 warp ends. I am getting ready to thread those 888 ends again. It’s part of the preliminary process for a new drawloom project. A drawloom has two sets of heddles. Thread the pattern heddles. Then, thread the ground heddles. I enjoy all the preliminaries because of what they bring about—a delightful new weaving adventure!

Preparing a new drawloom warp.
New drawloom warp of 16/2 cotton is on the warp beam.
Long heddles and lingos for the drawloom.
Long pattern heddles and lingos hang on a pegboard wall in the drawloom studio until needed.

Before I start threading, I count out all the lingos (weights) I need for the pattern heddles. Then, I hang a lingo on each unit of pattern heddles. In this case, there are 148 units, and six heddles in each unit. I move all those prepared units (heddles with lingos) to the back of the loom, get comfortable on my loom bench, and start threading. After a few sessions, I am finished threading the pattern heddles.

Drawloom threading heddles.
Pattern heddles hang at the back of the loom for threading.
Texas hill country Bluebonnets!
On the walking path to my drawloom studio each day I see the startling blooms of our Texas hill country Bluebonnets. Just imagine the unseen preliminaries for this beauty!
Drawloom pattern heddles and lingos.
Threading continues.
Pattern heddles are threaded for the drawloom.
All 888 pattern heddles are threaded! Ground heddles are next…

Next up, I will thread long-eye heddles on six ground shafts. A few more start-up operations after that, and then we will see this big ol’ boat raise its sails and leave the shore for another exhilarating adventure in weaving!

May you enjoy the preliminaries for every new start.

Happy weaving,
Karen

Tried and True: Linen

Karen

Take a short stroll through our home and you will see and touch linen in all its superb versatility. Linen warp and weft speaks of elegance. Yet, this natural fiber is right at home with ordinary daily living. Linen, oh, how it sings!

I am thrilled to be dressing the Julia now with 16/2 linen on eight shafts. We will have another linen highlight to grace our home—a table runner for our dining room table.

Bockens 16/2 line linen for a handwoven runner.
It is a happy day when new tubes of Bockens 16/2 line linen arrive at the door.
Making a linen warp.
Winding two threads together at a time on the warping reel.
8-shaft Julia and linen warp.
Dividing the warp into three bouts makes it easier to spread and beam the warp with even tension across the warp.
Glimakra Julia 8-shafts. Glorious linen!
Golden bleached linen is a gorgeous backdrop for the olive center section and contrasting midnight blue borders.

Is there anything more vibrant than the sheen of linen saturated with color? And, have you noticed that plain unbleached linen is anything but plain? Linen fills both ends of the spectrum—glowing exuberant color and natural wrinkled humility. Linen, oh, how it sings! There’s always room for more music in the home.

May your home be filled with everyday elegance.

Happy Weaving,
Karen

Grace at the Loom

Karen

The blue threads for this project are delightful! Four shades of blue, from pale blue to sapphire, play across the warp, accented with navy blue stripes. Lucious 8/2 cotton is threaded in eight-shaft twill. The hand of the fabric will be well suited for the chair arm- and headrest- covers I have planned. This blue color sequence is the winning combination from the thread wrappings I showed you in October. (See Warp Sequence Planning.)

Threading heddles for 8-shaft twill.
Project notes sit with me on the loom bench.
Beautiful blue Bockens 8/2 cotton!
Beautiful warp beam gives a glimpse of how the blue flows together.

My warp planning had a calculation error. I went on my merry way, winding the warp, beaming the warp, and threading the heddles. Until, …Surprise! I have three extra ends left after all the heddles are threaded. Fortunately, there is grace at the loom. I pull the navy blue border threads and three light blue threads out of their heddles and re-thread the navy blue border stripe. The three light blue ends will hang off the back, unused. All is well.

Warp color sequence - blue, blue, blue, blue!
Three light blue ends sit on top of the lease stick tied to the back beam. These extra warp threads will hang off the back and stay out of the way of the warp being woven.

Grace is like that. We mess up, find and admit our wrong, and the Lord Jesus forgives, granting us a new start. When we are wrong we need grace. What about when others are wrong? When the errors of others affect us, what shall we do? Forgiveness is our only option. There is no good reason to hold those error threads and weave them into our fabric.

May you be a recipient of grace.

Your friend,
Karen

My New Glimåkra Julia Loom

Karen

My family of looms just welcomed a new little sister—Julia! This 8-shaft countermarch is Glimåkra’s smallest floor loom. I dressed the loom right away in 6/2 Tuna wool for 4-shaft Jämtlandsdräll to try out the loom. So far, so good. An 8-shaft project using 20/2 Mora wool is up next. Would you believe this is my new portable loom? Surprisingly, the Julia fits in the back of our vehicle, without disassembling. This is the loom you can expect to see with me at future workshops.

My new Glimakra Julia Loom delivered!
One of the boxes delivered to my front door.
Assembling my new Glimakra Julia loom!
Loom assembly in our foyer.

My Julia Observations:

  • It goes together like you’d expect from a Glimåkra. Instructions are minimal, and quality is high. It’s a well-designed puzzle.
  • The assembled loom is easy to move around to gain space needed for warping, or simply to change location for any reason.
  • The breast beam is not removable like it is on my other Glimåkra looms, which makes it a stretch to thread the heddles from the front. However, by hanging the shaft bars from the beater cradle at the very front I can thread the heddles without back strain. (Or, if you are petite and don’t mind climbing over the side, you can put the bench in the loom for threading.)
  • Tying up lamms and treadles is not much different than it is for my Ideal. Everything is well within reach from the front. It helps to take the lamms off the loom to put in the treadle cords, and then put the lamms back on the loom. With one extra person available, it is entirely feasible to elevate the loom on paint cans, upside-down buckets, or a small table to make tie-ups easier, but I didn’t find it necessary to do that.
Swedish loom corner in the living room. New Glimakra Julia.
Loom that Steve built sits near the windows in our living room. Julia sits nearby. Sister looms.
Glimåkra Standard and Glimåkra Julia in the living room.
Glimåkra Standard sits by the windows at the front of the living room. Julia sits a few steps away. Loom sisters.
  • Weaving on the Julia is a delight, as it is with my other countermarch looms. Everything works. With four shafts, the sheds are impeccable.
  • The bench adjusts to the right height.
  • The hanging beater is well balanced, sturdy, and has a good solid feel. I can move the beater back several times before needing to advance the warp.
  • I thought the narrower treadles might prove annoying, but I’ve been able to adjust quickly. After weaving a short while, I forget about the treadle size.
Jämtlandsdräll in Tuna wool.
Double-bobbin shuttle for the pattern weft, and new boat shuttle that came with the loom for the ground weave weft. All 6/2 Tuna wool. Jämtlandsdräll.

Steve is the loom assembler in our family. I stand by and give a hand when needed. I hope you can feel our excitement as you watch this short video of us discovering what’s in the boxes and figuring out how it all goes together.

May you enjoy the puzzles that come to your doorstep.

Happy Weaving,
Karen