Tag: beaming

Imagine Rag Rugs on the Drawloom

Karen

Rag rug weaving on the drawloom! I can only imagine the delight. In the meantime, the drawloom is getting dressed. It takes time to group the pattern heddles into units, add lingos, thread pattern shafts, thread eight ground shafts, sley the reed, move the ground shafts and pattern shafts to their positions, and tie on. After I finish all that I can think about adding all the single-unit draw cords and finish tying up. Whew!

Winding a warp for the next drawloom project.
Warping reel is in a corner of the drawloom studio. When not in use, the reel is folded up and pushed against the wall.
Warp chains of 12/6 cotton rug warp. Drawloom rag rugs!
Warp chains of 12/6 cotton rug warp.
Drawloom - rug warp is ready for threading.
Warp is beamed and ready for threading.

I became acquainted with the single-unit drawloom at Joanne Hall’s studio (see Drawlooms in Montana), but this is my first go at it on the drawloom in my studio. Because of the reward that awaits, I will gladly tackle all the tasks of dressing this loom. Weaving rag rugs on a drawloom will be phenomenal!

Pattern heddles and weights for prepping the drawloom.
Pattern heddles are hanging on the breast beam for grouping into pattern units. A lingo is hung on each unit.
Threading the drawloom.
Pattern heddles have been threaded. You can see the lingos hanging below. Ground heddles are now being threaded. Straight draw threading on eight ground shafts.

Joy sees hidden treasure. We go to great lengths to unearth high-value treasure. Jesus did this, seeing us as the reward. That’s what Christmas celebrates. Jesus left his splendor in heaven to come to earth as a baby. He entered this world and endured the worst because of the joy set before him. He did it all for the joy of having us in fellowship with God. We come to him and find that we are the Grand Weaver’s reward.

May your joy be full.

Joy to you,
Karen

Process Review: Dressing the Drawloom the Second Time

Karen

Dressing the drawloom the second time is easier than the first time. No slip ups or confusion. Just smoothly moving from one step to the next. (Read to the end to see what to expect for July.)

Winding skeins of wool yarn into balls.
Winding skeins of wool yarn into balls.

With my first drawloom warp the most challenging part was distributing the pattern shafts. (See Q and A with Joanne Hall and Drawloom Dressing.) This time something clicked and the light bulb turned on. Instead of blindly following steps, I now understand what I am doing, and why. And I am having fun in the process!

Winding warp on the warping reel.
Winding the warp on the warping reel, making two bouts.
Big fat wool warp chains.
Warp chains of 6/2 Tuna wool, ready to dress the loom.
Ready to thread pattern heddles.
After beaming the warp, the loom bench is moved to the back of the loom for threading heddles. Pattern heddles first, and then, ground heddles.
Sleying the reed on the drawloom.
With the reed sleyed, it’s time to return the ground shafts to the front of the loom and put the reed in the beater.
Leveling string is doing its job!
Warp is tied on, and the leveling string is doing its job.
Distributing pattern shafts on the drawloom.
Inkle band serves to separate pattern heddles as I distribute the pattern shafts.
Adding pattern shafts to the drawloom.
Pattern shafts are resting nicely on the pattern shaft holders. Their little hooks grab the Texsolv that connects them to the draw cords and handles.
Dressing the drawloom!
Pointed threading can be seen in the arrangement of the heddles on the pattern shafts.
Dressing the drawloom!
Drawloom setup is complete except for tying up the treadles. Treadle tie-ups on a drawloom are refreshingly simple.
Testing pattern sheds on the drawloom.
Testing pattern sheds by pulling some of the draw handles. After a few small adjustments, she’s ready to weave!
Wool on the drawloom.
First sample. 6/2 Tuna wool warp and weft, 4-shaft broken twill on the ground shafts, sett is 5.5 ends per cm, 16 pattern shafts with 1 extra shaft for the edges.

Friends, It’s that time again, when Warped for Good is put on pause for the month of July.

Thank you for sharing in this journey with me!

What’s on my looms: I am near the end of the blue double weave blanket on the Standard, and I am planning a new pictorial tapestry for that loom. The drawloom is dressed and in motion. And the Ideal loom is still sitting ready for rosepath rag rugs. Also, Steve and I have a Casita trip planned that will include some leisurely backstrap band weaving.

What’s on your loom right now? Share with us in the comments.

See you the first Tuesday of August! (In the meantime catch me over on Instagram @celloweaver.)

May your second times be better than your first times.

Keep on Weaving,
Karen

Beaming Double Weave

Karen

This is double weave on twelve shafts. One layer is the gorgeous lapis lazuli blue. The other layer is neutral almond for contrast. I am spreading and beaming this 6/2 Tuna wool warp with two sets of lease sticks—one set for each layer/color.

Big fat warp chains. Tuna wool for double weave.
Big fat warp chains. Double weave on twelve shafts, with 6/2 Tuna wool for warp and weft.

When you have two sets of lease sticks, though, it is a serious challenge to get the two colors to alternate correctly as you move the end loops to a separate stick. The ends on the stick are then transferred to the back tie-on bar. I did breathe a sigh of relief when everything was finally lined up and in order.

Double weave. Ready to beam the wool warp.
Two sets of lease sticks carries the challenge of having clear visibility of the lease cross in both warp layers. After one or two do-overs, all the yarn is successfully moved to the back tie-on bar. Moving from right to left, I separate and straighten each warp end on the tie-on bar. Only a few more left to straighten.
Ready to beam this wool double weave warp.
Back tie-on bar all in order. Now ready to move the pre-sley reed to the beater and begin beaming the warp.

And I’m reminded again how beautiful a beamed warp is. It’s worth the challenges.

Tuna wool warp on Glimakra Standard.
Warp beam and back beam show the beamed warp.
Wool warp separated into threading groups.
Separated into threading groups for the next phase of dressing the loom.

That beautifully ordered wool on the back tie-on bar, now hidden from view, is an essential element for quality handwoven cloth. Kindness is that way. It’s a core trait deep in one’s character that is revealed in interactions with others. Kindness makes you beautiful. It’s not something you try to be. It’s something we wear. It’s our inner being dressed in the character of Christ.

May you be dressed in kindness.

Affectionately yours,
Karen

Getting Dressed to Weave

Karen

I want to wrap up in this cozy throw already. But I need to weave it first. This is an undulating twill throw that I am making for sweet Lindsay, one of my daughters-in-law. Of course, I am including enough warp to make a small throw of my own.

Getting ready to beam the warp. Back to front warping.
Four chained bouts. The 8/2 cotton warp is pre-sleyed, and the back tie-on bar has been placed through the loops at the end of the warp.

Every step of dressing the loom is fascinating. I easily get immersed in the enjoyment of the process. All the while, I’m dreaming of the finished work.

Read to beam the warp, using warping trapeze.
Warping trapeze is in place at the front of the loom. Ready to beam these soothing colors onto the warp beam.

Warp is beamed. Ready for threading.
Warp is beamed. Warp ends are counted into groups of 32 ends each, for efficiency and accuracy in threading. This will be threaded for undulating twill on eight shafts.

Dressing the loom leads to the making of cloth. Dressing our lives leads to the making of good character. Prayer is of utmost importance in dressing our lives. Prayer is not a single step in the process, but a posture of faith throughout the process. Earnest prayer reaches God. The power of prayer is not in our words, in the threads we express, but in the Grand Weaver. He receives our humble threads and weaves them into his will to bring about his beautiful cloth. Fascinating, isn’t it?

May you dream as you dress the loom.

Prayerfully,
Karen

Melody Towels

Karen

I am stepping out of the box with this combination, trusting that what is seen only in my mind’s eye will have an extraordinary impact. This warp will become towels for my daughter Melody. I chose cottolin threads in colors that remind me of the colorfully painted homes we saw on our visit to Chile a few years ago when Melody was living there. Aqua, light poppy, marigold, and orchid.

New warp on the warping reel.
Mix of colors that remind me of Chile.

Warping reel. Winding a new colorful warp!
First of three bouts on the warping reel.

Beaming the warp with a warping trapeze.
Beaming the warp with the help of the warping trapeze.

Cottolin towel warp being beamed.
Warp beam with new cottolin warp for towels.

We trust what we can see—a chair to hold us, and an airplane to fly us. But unseen things are also part of our trust—the chair maker’s glue, and the air that aerodynamic engineers depend on. Earth and heaven, seen and unseen. Jesus, seen on earth, made the unseen God visible. Trust the unseen.

May you step out of the box.

Trusting,
Karen