yardage – Page 11 – Warped for Good

Monksbelt Flowers on a Shoulder Bag

June 30, 2020June 29, 2020 Karen

Remember Joanne Hall’s Swedish Art Weaves workshop that I took a few months ago? With the warp that was left, I explored some of the art weaves in more depth.

Monksbelt (Munkabälte), Dukagång, and Halvkrabba can be seen below the warp.

I finished off the linen warp by making a front and back panel for a small shoulder bag. A monksbelt pattern is scattered like flowers on the front. The back has various stripe patterns in weft-faced plain weave. I wove a shoulder strap on my band loom using 6/2 Tuna wool for warp and 12/6 cotton for weft.

Weaving Monksbelt with half heddle sticks. — Half-heddle sticks and batten in front of the back beam, for weaving monksbelt patterns.

Pick up for monksbelt. — Pick-up stick in front of the reed is being used to weave a monksbelt flower “petal.”

Handwoven shoulder bag in progress. — Back panel has varying stripe patterns.

Glimakra band loom. Narrow wool band. — Narrow wool band for the bag shoulder strap.

The bag has simple construction, mostly hand-stitched. In one of my remnant bins I found a piece of wool fabric that I wove several years ago. It’s perfect for the sides and bottom of the bag. The lining uses pieces from fabric that went into my latest rag rugs, and has pockets, of course.

Making a handwoven wool bag. — Overhand knots secure the warp ends.

Construction of a wool shoulder bag. — Ready to assemble all the parts.

Constructing a small handwoven wool bag. — Handwoven wool pieces are hand-stitched together.

Handwoven wool bag construction. — Bag construction continues with stitching the back in place.

Magnet closure on a handwoven bag. — Magnet closure is added to the lining before stitching the lining in place. Knots and fringe outline the top of the bag.

This bag with Monksbelt Flowers is for carrying sweet memories, happy moments, and heavenly dreams.

Inside of handwoven wool bag. — Pockets in the lining.

Monksbelt Flowers handwoven shoulder bag.

Resources: Swedish Art Weaves workshop with Joanne Hall; Heirlooms of Skåne Weaving Techniques, by Gunvor Johansson; Väv Scandinavian Weaving Magazine, 2/2013.

This is the time for my annual pause for the month of July. I appreciate you joining me in this weaving journey!

I look forward to being back with you again Tuesday, August 4. In the meantime, joyfully draw living water from the source, Jesus Christ.

May you carry no more than necessary.

With love,
Karen

My New Glimåkra Julia Loom

May 12, 2020May 11, 2020 Karen

My family of looms just welcomed a new little sister—Julia! This 8-shaft countermarch is Glimåkra’s smallest floor loom. I dressed the loom right away in 6/2 Tuna wool for 4-shaft Jämtlandsdräll to try out the loom. So far, so good. An 8-shaft project using 20/2 Mora wool is up next. Would you believe this is my new portable loom? Surprisingly, the Julia fits in the back of our vehicle, without disassembling. This is the loom you can expect to see with me at future workshops.

My new Glimakra Julia Loom delivered! — One of the boxes delivered to my front door.

Assembling my new Glimakra Julia loom! — Loom assembly in our foyer.

My Julia Observations:

It goes together like you’d expect from a Glimåkra. Instructions are minimal, and quality is high. It’s a well-designed puzzle.
The assembled loom is easy to move around to gain space needed for warping, or simply to change location for any reason.
The breast beam is not removable like it is on my other Glimåkra looms, which makes it a stretch to thread the heddles from the front. However, by hanging the shaft bars from the beater cradle at the very front I can thread the heddles without back strain. (Or, if you are petite and don’t mind climbing over the side, you can put the bench in the loom for threading.)
Tying up lamms and treadles is not much different than it is for my Ideal. Everything is well within reach from the front. It helps to take the lamms off the loom to put in the treadle cords, and then put the lamms back on the loom. With one extra person available, it is entirely feasible to elevate the loom on paint cans, upside-down buckets, or a small table to make tie-ups easier, but I didn’t find it necessary to do that.

Swedish loom corner in the living room. New Glimakra Julia. — Loom that Steve built sits near the windows in our living room. Julia sits nearby. Sister looms.

Glimåkra Standard and Glimåkra Julia in the living room. — Glimåkra Standard sits by the windows at the front of the living room. Julia sits a few steps away. Loom sisters.

Weaving on the Julia is a delight, as it is with my other countermarch looms. Everything works. With four shafts, the sheds are impeccable.
The bench adjusts to the right height.
The hanging beater is well balanced, sturdy, and has a good solid feel. I can move the beater back several times before needing to advance the warp.
I thought the narrower treadles might prove annoying, but I’ve been able to adjust quickly. After weaving a short while, I forget about the treadle size.

Jämtlandsdräll in Tuna wool. — Double-bobbin shuttle for the pattern weft, and new boat shuttle that came with the loom for the ground weave weft. All 6/2 Tuna wool. Jämtlandsdräll.

Steve is the loom assembler in our family. I stand by and give a hand when needed. I hope you can feel our excitement as you watch this short video of us discovering what’s in the boxes and figuring out how it all goes together.

May you enjoy the puzzles that come to your doorstep.

Happy Weaving,
Karen

It Is Going to Be All White

May 5, 2020May 3, 2020 Karen

I am getting ready for Christmas. When I was a little girl, my Aunt Helen made a Christmas tree skirt for our family. It was a simple white felt skirt, with added colorful felt silhouettes depicting Christ’s Nativity. I want to reproduce that Christmas tree skirt using handwoven fabric. This fabric on the Ideal loom will be the base of the skirt. I will use some of my myriad handwoven fabric remnants for the colorful Nativity appliqué.

Weaving wool fabric for a Christmas tree skirt. — Möbelåtta warp on the right, and Fårö weft on the left.

Fabric for Christmas tree skirt. — Temple in place for consistent beat and tidy selvedges.

The warp is unbleached 8/2 Möbelåtta wool. The weft is bleached 6/1 Fårö wool. The 6-shaft point twill fabric is delightful. Perfect for what I have in mind. It is peaceful, soothing, restful, and calm. You can see that everything is going to be all white.

Wool fabric for Christmas tree skirt. — Six-shaft point twill.

There is a time for color, action, and noise. But we also need a time for serenity, stillness, and quiet reflection. Going alone to sit in the Lord’s presence gives us just that. It is there that we can pour out our heart in prayer. The Lord meets us where we are when we pray. And He tells the trusting heart that everything is going to be all right.

May your heart be at rest.

With you,
Karen

PS Floating Selvedges. Last week I asked if you could tell which one of these four towels was woven without floating selvedges. (1 – 4, with the towel on top as #1.) See Process Review: Jubilation Hand Towels

Four new handwoven towels. — Three of the four towels were woven with floating selvedges.

The towel that was woven without floating selvedges is the same towel that received the most votes. Towel #2!

It seems counterintuitive that weaving twill structures without floating selvedges could produce a pleasing edge. But most of the time the small floats that appear at the edge are inconsequential, especially after wet finishing. (By the way, I am weaving the white point twill mentioned above without floating selvedges, as well.)

Thank you for your wonderful participation!

Tried and True: Something New from Something Old

April 14, 2020April 13, 2020 Karen

My grandma made a pattern on brown paper for a neck pillow. I suppose she found the pattern in a magazine or newspaper decades ago. I am using my copy of her pattern to make my own neck pillow. Maybe someday my pillow will be as worn and wobbly as Grandma’s well-loved neck pillow that I remember.

Looking through my pile of handwoven scraps I find the piece of fabric that had been hanging as a Roman shade on the back door of our previous home. This two-block twill in cotton and linen was my first 8-shaft project on my floor loom. Good memories! The fabric, softened and slightly faded through daily use, is perfect for the comfy neck pillow I’m imagining. (Unlike Grandma’s pillow, I’m making this one with a removable cover so it can be easily laundered.)

Roman shade from my first 8-shaft weaving project. I wove the linen draw cord on my two-treadle band loom.

Instructions for Constructing a Handwoven Neck Pillow

Supplies:

Cotton muslin, pre-washed
Handwoven fabric, pre-washed
Cluster Fluff, or other cluster fill or polyester fiberfill
7” invisible zipper
Sewing machine
Invisible zipper foot
Sewing thread
Hand-sewing needle
Iron
Sleeve board for pressing, optional

Steps:

Cut four pillow pattern pieces from the muslin.
Sew two of the muslin pieces together, right sides together. Press seams open.
Sew the other two muslin pieces together, right sides together. Press seams open.
Sew the two parts together, right sides together, leaving a 4-inch opening for turning and stuffing. Press seams open using a sleeve board.
Turn the pillow right side out.
Stuff with Cluster Fluff, starting at the furthest end from the opening. Fill to desired fullness.
Hand stitch the opening closed.
Cut four pillow pattern pieces from the handwoven fabric.
Serge or zigzag the fabric edges. Press flat.
Insert invisible zipper between two of the pieces.

Making a handwoven neck pillow. — Invisible zipper is sewn into place between two of the panels.

Complete the seams at both ends of the zipper. Press seams open.
Sew the two other pieces together, right sides together. Press seams open.
Open zipper, and sew the two parts together, right sides together. Press seams open using a sleeve board.
Turn the pillow case right side out.
Push the muslin pillow into the pillow case. Close the zipper.

Handwoven neck pillow cover. — Inner pillow and outer cover are made from the same pattern to make it a snug fit.

Handwoven neck pillow. How to with construction steps. — Fabric is 16/2 cotton warp and 16/1 linen weft.

Take a nap in your favorite chair with the pillow behind your neck.

If you would like a pdf copy of my grandma’s neck pillow pattern, please click HERE to send me an email request. I will be happy to send the pattern to you.

May you see old treasures in new ways.

Rest and Be Well,
Karen

Process Review: From Drawloom to Garment

January 28, 2020January 26, 2020 Karen

I warped the drawloom with gray 6/2 Tuna wool several months ago with the goal to make fabric for a reversible vest. The beautiful drawloom fabric turned into dreamy garment-worthy fabric after washing! (See Process Review: Drawloom Jewels)

And then I hit two huge hurdles.

Hurdle 1. Fit.

In order to cut into handwoven drawloom fabric, I need assurance that the end result will fit me. My sewing assistant helped me refine a commercial pattern.

My sewing assistant, Miss Fit. — Meet my sewing assistant, Miss Fit.

After umpteen muslins and two or three mock-ups, I finally got the fit I was after. Confidence to cut!

Hurdle 2. Garment Construction Uncertainties.

Do some detail studies, my dear friend Elisabeth said to me. Her advice got me over the insecurity hurdle. A detail study is making a small sample to test a hypothesis or answer a question. I made a list of everything I wanted to know about constructing a vest from this type of handwoven wool fabric. And then, using some of the extra fabric from the sampling at the beginning of the warp, I did a detail study for each point on the list. Twelve detail studies in all.

(If you are interested in seeing my complete list of 12 detail studies for this project, click HERE to send me an email and ask for my “Detail studies”.)

Here are a few examples of my findings:

Zigzag before or after cutting? // Zigzag before cutting, stitch width 3, stitch length 2 1/2
Lapped seams? 3/8”, 1/2”, 5/8”? // Yes, lapped seams, overlap 1/2”, stitch basted line to guide placement
Neck and armhole curves – staystitch with hand running stitches or machine stitching? 1 row or 2? // Hand running stitches, 2 rows