yardage – Page 9 – Warped for Good

Tried and True: Slay – Sleigh – Sley

January 12, 2021January 11, 2021 Karen

Slay the dragon. Ride the sleigh. Sley the reed. To succeed in these challenges, you must be prepared, pay attention, and make sure you’re on the right track. Here, I’m going to focus on sleying the reed with success. (For dragon slaying and sleigh riding challenges, I won’t be of much help.) Don’t miss the new video below with tips for sleying the reed.

Loom lighting makes a difference! — Shop light attached to top of loom provides good general lighting to all working areas of the loom. Smaller clip-on lamp provides directed light for detail work, like sleying a dense reed.

Clip-on lamp for detail work at the loom. — Even in a room filled with natural light, a focused bright light on the work area relieves eye strain and reduces errors.

First, make sure you have good lighting. I have a snake arm shop light attached to the top of my loom. (See Tools Day: Loom Lighting for more about loom lighting.) I also have a smaller clip-on gooseneck LED lamp, clipped onto my loom bench, that illuminates my specific working area. With a fine-dent reed, like this metric 100/10- (~ imperial 25-) dent reed, focused lighting makes a difference. It means seeing the dents instead of guessing.

Making a new video. Tips for sleying the reed. — Making a new video. Steve does the filming and I do the editing.

In this video, I share some tips for sleying the reed, with checkpoints to ensure success. (See Tools Day: Click Test for more about the “click test” mentioned in the video.)

May your dragons be few.

Yours truly,
Karen

Handwoven Applique for Christmas

December 15, 2020December 13, 2020 Karen

Our family celebrated a birth-day last week. Meet baby Isaac, our ninth grandchild! Also, this week, I am finishing up the pictorial scene of another celebrated birth-day. Each appliqué piece is stitched to the background, using various threads, needles, and simple embroidery stitches to help convey the details of this humble historical event.

Newborn baby — Welcome to our family, baby Isaac.

Handwoven remnants for Christmas tree skirt.

Many firsts are represented in these handwoven scraps. My first floor loom project, first handwoven curtains, first 8-shaft weave, first linen warp, first drawloom piece, etc. There are some special family memories here, too—wedding gifts, baby wrap, housewarming… Humble beginnings and handwoven treasures generated by love.

Reverse side of handwoven Nativity project.

Birth is a picture of the fullness of God’s grace. The birth of our ninth grandchild is as glorious as the birth of the first. Each new child brings yet-unwrapped gifts. The birth of baby Jesus is a picture of the fullness of God’s grace brought within reach of all. His humble beginnings, with manger bed and young parents, animals and stars watching—all so wondrous to ponder. Christ Jesus came into the world, to be wrapped in scraps of cloth! We are still unwrapping the gifts he brought to us from heaven—forgiveness, peace, and enduring joy. God with us, Immanuel.

Christmas tree skirt Nativity. All handwoven!

May your home be filled with heavenly treasures.

Christmas blessings,
Karen

Process Review: Weaving Rhythm

November 24, 2020November 24, 2020 Karen

“With so many looms, how do you decide what to weave every day?,” I was asked. The answer lies in my Weaving Rhythm. I have five floor looms. I happily aspire to meet the challenge of keeping all of them active.

Glossary

Weaving Rhythm ~ A pattern created across time, through a regular succession of weaving-related tasks.

Arrange individual tasks to keep each loom consistently moving forward in the weaving continuum.

Weaving Continuum ~ The cycle for each loom that is continually repeated.

Plan
Dress
Weave (with a pause for planning)
Finish

When the first few centimeters are woven on a new project, begin planning the next project. When finishing is completed for the current project, wind a new warp and dress the loom for the next project.

First Things First ~ Prioritize daily tasks to maintain the Weaving Rhythm.

Finishing
Dressing
Weaving

Do some finishing work first. Do some loom-dressing tasks next. The reward, then, is sitting at one of the dressed looms and freely weaving for the pleasure of it.

Weaving bath towels on the Glimakra Standard. — Glimåkra Standard, 120cm (47″), vertical countermarch. My first floor loom. Weaving the third of four bath towels, 6-shaft broken and reverse twill, 22/2 cottolin warp and weft.

Glimåkra two-treadle band loom. Weaving hanging tabs for bath towels. 22/2 cottolin warp and weft.

Glimakra 100cm Ideal. Sweet little loom. — Glimåkra Ideal, 100cm (39″), horizontal countermarch. My second floor loom. Dressing the loom in 24/2 cotton, five-shaft huckaback, for fabric to make a tiered skirt. Ready to start sleying the reed.

Hand-built Swedish loom. — Loom that Steve built, 70cm (27″), horizontal countermarch. My third floor loom. Weaving the header for a pictorial tapestry sample, four-shaft rosepath, 16/2 linen warp, Tuna/Fårö wool and 6/1 tow linen weft.

Sweet little Glimakra Julia 8-shaft loom. — Glimåkra Julia, 70cm (27″), horizontal countermarch. This is my fifth (and final?) floor loom. Weaving the first of two scarves, eight-shaft deflected double weave, 8/1 Mora wool warp and weft.

Weaving lettering on the drawloom. — Glimåkra Standard, 120cm (47″), horizontal countermarch, with Myrehed combination drawloom attachment. This is my fourth floor loom. Weaving some lettering for the seventh pattern on this sample warp, six-shaft irregular satin, 16/2 cotton warp, 16/1 linen weft. 35 pattern shafts, 132 single unit draw cords.

Give Thanks ~ Live with a thankful heart.

Every day I thank the Lord for granting me the joy of being in this handweaving journey. And I thank him for bringing friends like you along with me.

May you always give thanks.

With a grateful heart,
Karen

Drawloom Windmill and Taildragger – Version 2

November 3, 2020October 30, 2020 Karen

I’m curious. How much difference will it make to change the direction of the design? I wove the first Windmill and Taildragger from the side. (See Time Lapse: Windmill and Taildragger on the Drawloom.) This second one, I am weaving from bottom to top. For one thing, I know I can enlarge the image if I turn it upright, giving me more distinct details.

Windmill and Taildragger woven on the drawloom. — *Windmill and Taildragger* – Version 1, from the side. Beginning of *Windmill and Taildragger* – Version 2, upright.

Taildragger on the drawloom. — More detail is possible with the expanded size of the image. Center image and lower border use single-unit draw cords. Five pattern shafts are used for the side borders.

Temple in use on the drawloom. — Temple maintains the correct weaving width.

Glimakra Standard loom with Myrehed combination drawloom attachment. — Side view of drawloom with Myrehed combination attachment.

This second Windmill and Taildragger is indeed larger, with smoother detail lines. No surprise. What does surprise me is how much simpler this one is to weave! The single-unit pulls are more manageable now that the design is turned in a lengthwise direction. Enlargement, clarity, and ease—all from a single design adjustment.

Drawloom weaving. — Single-unit draw cords seen in the weaving of the windmill’s blades.

Windmill and Taildragger on the drawloom. — *Windmill and Taildragger* – Version 2

Spoken wishes express our needs. Our wishes are sincere, but hold no power in themselves. What if we turn the direction of our wishes? When we turn those expressions upward to God they become prayer. Prayer is an expression of belief. Jesus invites us to tell him our needs through prayer. Prayer enlarges and clarifies our hopes. You may be surprised how simple it is to take your needs to the Lord in prayer.

May your prayers bring the help you need.

Peace to you,
Karen

Process Review: Beaming the Warp

October 27, 2020October 25, 2020 Karen

I am making a new ‘cello skirt (a tiered skirt), starting from scratch. The warp is 24/2 cotton, most of it unbleached. Each tier will be edged with a narrow Poppy border. The pattern in the cloth will be a huckaback (huck lace) design, adapted from Little Tablecloth in Huckaback on p.10 in Happy Weaving from VävMagisinet.

Today, I’m beaming the warp. My method includes a combination of things I have learned from these three excellent sources: Learning to Warp Your Loom, by Joanne Hall, Dress Your Loom the Vävstuga Way, by Becky Ashenden, and The Big Book of Weaving, by Laila Lundell.

I’ll let the pictures speak for themselves.